Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 23Citation - Scopus: 23Cold Sintering of Soda-Lime Glass(Elsevier Ltd., 2021) Karacasulu, Levent; Ögür, Ezgi; Pişkin, Cerem; Vakıfahmetoğlu, ÇekdarOrdinary recycled soda lime glass powder was densified via cold sintering process with the aid of concentrated NaOH solution. Increase in processing time, temperature and concentration of the NaOH solution resulted in the formation of monolithic glass artifacts with higher relative densities. The sample densified the most (95.2%) was obtained when the sintering was performed at 250˚C with a 20 min dwell time using 15 M NaOH solution.Article Citation - WoS: 11Citation - Scopus: 9Biophysical Evaluation of Physiological Effects of Gilthead Sea Bream (sparus Aurata) Farming Using Ftir Spectroscopy(Elsevier Ltd., 2014) Ceylan, Çağatay; Tanrıkul, Tansel; Özgener, HüseyinSparus aurata is one of the two most important cultured fish species in the Mediterranean region. The present work investigates the effects of culturing in S. aurata liver tissue at the molecular level using Fourier Transform Infrared (FTIR) spectroscopy. FTIR spectroscopy revealed dramatic differences between the wild and aquacultured fish liver cells, which mainly indicated that the level of glycogen increased in the aquacultured samples and the protein/lipid ratio decreased by 42.29% indicating that triglycerides and cholesterol esters increased and the protein content decreased in the aquacultured samples. The 15.99% increase in the level of unsaturation indicated elevated lipid peroxidation. Structural/organisational changes in the nucleic acids along with increased transcriptional status of the liver tissue cells were observed in the cultured fish tissue. All these results indicated that culturing induces significant changes in fish physiology. In addition FTIR spectroscopy is a promising method to monitor the physiological changes in fish physiology.Article Citation - WoS: 55Citation - Scopus: 59Prediction of Various Chemical Parameters of Olive Oils With Fourier Transform Infrared Spectroscopy(Academic Press Inc., 2015) Uncu, Oğuz; Özen, BanuVibrational spectroscopic techniques offer advantages such as rapid and accurate measurements with minimum sample preparation and waste generation. In this study, it was aimed at determining some important quality parameters (oxidative stability, colour pigments, fatty acid profile and phenolic composition) of olive oils by Fourier transform infrared spectroscopy as one of the vibrational spectroscopic methods. Partial least square calibration models were constructed in order to reveal any correlation between quality parameters and spectral data. Regression coefficients for developed models showed that oxidative stability (0.99), chlorophyll content (0.98), some major fatty acids (palmitic (0.87), oleic (0.94), and linoleic acids (0.97), saturated (0.91), monounsaturated (0.94) and polyunsaturated fatty acids (0.97)), hydroxytyrosol as a phenolic compound (0.97) and total phenolic content (0.99) were predicted successfully. Variable influence on the projection values indicated that palmitic, vanillic and cinnamic acids and hydroxytyrosol are the most significant contributors to oxidative stability of olive oils. © 2015 Elsevier Ltd.Article Citation - WoS: 18Citation - Scopus: 20Impact of Incorporated Oxygen Quantity on Optical, Structural and Dielectric Properties of Reactive Magnetron Sputter Grown High-? Hfo2/Hf Thin Film(Elsevier Ltd., 2014) Cantaş, Ayten; Aygün, Gülnur; Turan, RaşitHigh-κ hafnium-oxide thin films have been fabricated by radio frequency (rf) reactive magnetron sputtering technique. To avoid formation of an undesired interfacial suboxide layer between Si and high-κ film, prior to HfO2 deposition, a thin Hf buffer layer was deposited on p-type (1 0 0) Si substrate at room temperature. Effect of oxygen gas quantity in the O2/Ar gas mixture was studied for the optical and structural properties of grown HfO2 high-κ thin films. The grown thin oxide films were characterized optically using spectroscopic ellipsometer (SE) in detail. Crystal structure was studied by grazing incidence X-ray diffractometer (GIXRD) technique, while bonding structure was obtained by Fourier transform infrared spectroscopy (FTIR) analyses. In agreement with GIXRD and FTIR analyses, SE results show that any increment above ideal quantity of oxygen content in the gas mixture resulted in decrements in the refractive index and thickness of HfO2 dielectric film, while increments in SiO2 thickness. It is apparent from experimental results that oxygen to argon gas ratio needs to be smaller than 0.2 for a good film quality. The superior structural and optical properties for grown oxide film were obtained for O2/Ar gas ratio of about 0.05-0.1 combined with ∼30 W constant rf sputtering power. © 2014 Elsevier B.V. All rights reserved.Article Citation - WoS: 10Citation - Scopus: 14Chemical Characterization of Cretan Clays for the Design of Restoration Mortars(Springer Verlag, 2008) Budak, Meral; Maravelaki-Kalaitzaki, Pagona; Kallithrakas-Kontos, NikolaosThree clays and a marly-limestone from the West of Chania, Crete, fired at temperatures ranging from 200 to 1200°C, were characterized by XRD, FTIR, EDXRF and wet chemical analyses. The aim of this study was to assess the pozzolanic and hydraulic properties of these materials for potential use as binders in the design of restoration mortars. The mineralogical composition of the clays is quartz, illite, calcite, plagioclase, kaolinite and hematite. The identification of larnite and gehlenite in the calcined marly-limestone established it as potential cementious binder. Among the clays, one with low amount of calcite and considerable kaolinite content exhibited the best pozzolanic activity upon heating at 600°C. Therefore, it can be considered as an appropriate material for restoration purposes. It is deduced that the pozzolanic activity of fired clays is greatly dependent on the firing temperature and is enhanced in clays containing low calcite and high kaolinite amounts. © 2008 Springer-Verlag.