Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Now showing 1 - 3 of 3
Article Citation - WoS: 1Citation - Scopus: 2Recycling of Gas-To Sludge as a Potential Organic Amendment: Effect on Soil and Cotton Properties Under Hyperarid Conditions(Academic Press, 2023) Mabrouk, O.; Hamdi, H.; Sayadi, S.; Al-Ghouti, M.A.; Abu-Dieyeh, M.; Kogbara, R.; Al-Sharshani, A.Gas-to-liquid (GTL) sludge is a specific wastewater treatment by-product, which is generated during the industrial process of natural gas conversion to transportation fuels. This least studied sludge is pathogen-free and rich in organic carbon and plant nutrients. Therefore, it can be reused for soil enhancement as a sustainable management strategy to mitigate landfill gas emissions. In this field study, we compared the performance of soil treatments with GTL sludge to the more conventional chemical fertilizers and cow manure compost for the cultivation of cotton under hyperarid conditions. After a complete growing season, GTL sludge application resulted in the enhancement of soil properties and plant growth compared to conventional inputs. As such, there was a significant dose-dependent increase of soil organic matter (4.01% and 4.54%), phosphorus (534 and 1090 mg kg−1), and cumulative lint yield (4.68 and 5.67 t ha−1) for GTL sludge application rates of 1.5% and 3%, respectively. The produced fiber quality was adequate for an upland cotton variety (Gossypium hirsutum var. MAY 344) and appeared more dependent on the prevailing climate conditions than soil treatments. On the other hand, the adverse effects generally related to industrial sludge reuse were not significant and did not affect the designed agro-environmental system. Accordingly, plants grown on GTL sludge-amended soils showed lower antioxidant activity despite significant salinity increase. In addition, the concentrations of detected heavy metals in soil were within the standards’ limits, which did not pose environmental issues under the described experimental conditions. Leachate analysis revealed no risks for groundwater contamination with phytotoxic metals, which were mostly retained by the soil matrix. Therefore, recycling GTL sludge as an organic amendment can be a sustainable solution to improve soil quality and lower carbon footprint. To reduce any environmental concerns, an application rate of 1.5% could be provisionally recommended since a two-fold increase in sludge dose did not result in a significant yield improvement. © 2023 Elsevier LtdArticle Citation - WoS: 25Citation - Scopus: 27Characteristic Properties and Recyclability of the Aluminium Fraction of Mswi Bottom Ash(Elsevier, 2021) Gökelma, Mertol; Vallejo-Olivares, Alicia; Tranell, GabriellaThe increasing use of aluminimum in packaging applications results in many different aluminium-based products ending up in consumer mixed-waste bins. This waste is typically incinerated, generating an aluminium-containing bottom ash. The current work investigates the recyclability of the aluminium fraction in the bottom ash from waste incineration plants in the USA, UK and Denmark. Incinerated Al samples from different size fractions (2-6 mm, 6-12 mm and 12-30 mm) were characterized in terms of inherent oxide thickness, re-melting yield/coagulation and composition. The measured average oxide thickness on Al particles was 68 mm (SD=100), with the metal yield and coagulation efficiency measured to between 76 and 92% and 87-99% respectively. Larger particle size fractions resulted in a higher metal yield due to their higher mass to surface ratio. A simplified model correlating metal yield and particle size was proposed. The aluminium content of the melted material was determined to between 95.6 and 98.5% with main impurities being Fe, Si, Mn, Zn, Mg and Cu, corresponding to major aluminium alloying elements and waste charge components. (c) 2021 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).Article Citation - WoS: 39Citation - Scopus: 43Tailored Electrospun Fibers From Waste Polystyrene for High Oil Adsorption(Elsevier Ltd., 2018) Isık, Tuğba; Demir, Mustafa MuammerRecent ship accidents that resulted catastrophic oil spills necessitate producing environmentally friendly, costeffective, and large-scale fabrication technology for oil-sorbent materials. Various material systems have been employed to fabricate sorbent materials; however, using fresh material components as adsorbent can lead to a secondary pollution. Therefore, recycling of plastics wastes for the fabrication of adsorbent material could be a wise approach to handle this environmental issue. In this study, foam-expanded polystyrene (f-PS), a commodity polymer used for insulation and packing materials, was electrospun from solution mixture of THF and DMF. Surface and interior porosity were achieved from individual fibers electrospun froma composition of DMF: THF (1:3) at 20-wt% of solid f-PS content. The resulting adsorbents exhibited a considerable hydrophobicity (WCA approximate to 120 degrees) and oleophilicity (CA approximate to 10 degrees), which can selectively adsorb both vegetable and engine oils from polluted waters. The porosity of the fibers has significant effect on the sorption capacity and separation efficiency up to 124 g/g and 99%, respectively. Thus, electrospun mats of the polystyrene wastes offer a promising adsorbent for the remediation of oily wastewaters. (C) 2018 Published by Elsevier B.V.