Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 9Citation - Scopus: 11Electrospun Polyacrylonitrile (pan)/Polypyrrole (ppy) Nanofiber-Coated Quartz Crystal Microbalance for Sensing Volatile Organic Compounds(Springer, 2023) Yağmurcukardeş, Nesli; İnce Yardımcı, Atike; Yağmurcukardeş, Mehmet; Çapan, İnci; Erdoğan, Matem; Çapan, Rifat; Açıkbaş, YaserIn this study, electrospun polyacrylonitrile (PAN)/polypyrrole (PPy) nanofibers (NFs) coated quartz crystal microbalance (QCM) were investigated for their sensing characteristics against six different volatile organic compounds (VOCs): chloroform, dichloromethane, carbon tetrachloride, benzene, toluene and xylene. SEM, TEM, FT-IR and TGA analysis were carried out for the characterization of PAN/PPy nanofibers and characterization results of PAN/PPy NFs showed that these nanofibers were morphologically well-arranged and straightforward with a cylindrical shape with the average fiber diameter of 253.17 +/- 27 nm. Among all the gas measurement tests, dichloromethane displayed the highest response values for PAN/PPy coated QCM sensors. When the reproducibility of kinetic studies for PAN/PPy NFs coated QCM sensors were examined, the most repetitive results were obtained by this QCM sensor during dichloromethane investigation and the diffusion coefficients of VOCs for the first and second regions increased with the order of xylene < toluene < benzene < carbontetrachloride < chloroform < dichloromethane. The sensitivities of the PAN/PPy nanofibers-coated QCM sensor against organic vapors are determined between 4.71 and 6.17 (Hz ppm(-1)) x 10(-4). As a result, PAN/PPy nanofibers exhibited high sensitivity and selectivity for VOCs sensor applications, especially for dichloromethane.Article Citation - WoS: 6Citation - Scopus: 6Nanolitography Based on Electrospun and Etched Nanofibers(Elsevier, 2021) Noori, Aileen; Döğer, Hilal; Demirhan, Yasemin; Özdemir, Mehtap; Özyüzer, Lütfi; Aygün, Gülnur; Sağlam, ÖzgeIn this study, we propose a new type of nanolithography procedure to fabricate orderly patterned metallic nanostructures using the electrohydrodynamic method and the reactive ion etching process. The electrohydrodynamic process parameters were tuned so as to create patterning with precision, and fibers in nanoscale on silver-coated substrates. We also studied reactive ion etching with different durations on the well-patterned samples. The experiments show that applying a voltage of 400 V resulted in straight patterned fibers with a diameter of 208.7 ? 30.3 nm. The statistical analysis on scanning electron microscope (SEM) images showed a significant difference in the diameter of the fibers fabricated at 400 V compared to those at 500 V and 600 V. We also confirm that the etching process has no affect on the fiber diameter. Moreover, electron dispersive X-Ray spectrometer (EDX) results suggest that an etching duration of 7 min is sufficient to remove the silver coating that is not covered with the fibers, and protect the silver nanostructures underneath the fibers. Utilizing a lowcost nanolithography procedure, we obtain the orderly patterned silver nanostructures for possible integration into miniaturized devices.Article Citation - WoS: 25Citation - Scopus: 27Osteogenic Differentiation of Mesenchymal Stem Cells on Random and Aligned Pan/Ppy Nanofibrous Scaffolds(SAGE Publications, 2019) Selamet, Yusuf; İnce Yardımcı, Atike; Baskan, Öznur; Yılmaz, Selahattin; Meşe, Gülistan; Özçivici, EnginThe aim of this study was to develop random and aligned polyacrilonitrile (PAN)/polypyrrole (PPy) nanofibrous scaffolds by electrospinning technique for osteogenic differentiation of mesenchymal stem cells. Nanofibers were fabricated successfully as straight, smooth, and free from bead formation. The average diameter of random and aligned nanofibers was 268(+/- 49) nm and 225(+/- 72) nm, respectively. Alignment process increased the tensile strength of nanofibers 3.9-fold, while the tensile strain of nanofibers decreased by 78%. PAN/PPy nanofibers were hydrophilic with the contact angle value of about 32 degrees and alignment did not affect the contact angle value. Random and aligned PAN/PPy nanofibers were investigated as a scaffold material for osteogenic differentiation of D1 ORL UVA mouse bone marrow mesenchymal stem cells. Cells were able to attach and grow on nanofibers confirmed by cell viability results. Stem cells that were cultured with osteogenic induction were able to mineralize on electrospun nanofibers based on alizarin red and Von Kossa dye staining. For aligned PPy nanofibers, mineralization occurred in the fiber alignment direction. Consequently, PAN/PPy nanofibrous mats in both random and aligned forms would be potential candidates for bone tissue engineering.Article Citation - WoS: 27Citation - Scopus: 37Nanofibrous Gelatine Scaffolds Integrated With Nerve Growth Factor-Loaded Alginate Microspheres for Brain Tissue Engineering(John Wiley and Sons Inc., 2018) Büyüköz, Melda; Erdal, Esra; Alsoy Altınkaya, SacideNeural regeneration research is designed in part to develop strategies for therapy after nerve damage due to injury or disease. In this study, a new gelatine-based biomimetic scaffold was fabricated for brain tissue engineering applications. A technique combining thermally induced phase separation and porogen leaching was used to create interconnected macropores and nanofibrous structure. To promote tissue regeneration processes, the scaffolds were integrated with nerve growth factor (NGF)-loaded alginate microspheres. The results showed that nanofibrous matrix could only be obtained when gelatine concentration was at least 7.5% (w/v). The scaffold with a modulus value (1.2 kPa) similar to that of brain tissue (0.5–1 kPa) was obtained by optimizing the heat treatment time, macropore size and gelatine concentration. The encapsulation efficiencies of NGF into 0.1% and 1% alginate microspheres were 85% and 100%, respectively. The release rate of NGF from the microspheres was controlled by the alginate concentration and the poly(L-lysine) coating. The immobilization of the microspheres in the scaffold reduced burst release and significantly extended the release period. The nanofibrous architecture and controlled release of NGF from the microspheres induced neurite extension of PC12 cells, demonstrating that the released NGF was in an active form. The results suggest that the scaffolds prepared in this study may have potential applications in brain tissue engineering due to topologic and mechanical properties similar to brain tissue and pore structure suitable for cell growth and differentiation.Article Citation - WoS: 70Citation - Scopus: 82Sorption Efficiency of Chitosan Nanofibers Toward Metal Ions at Low Concentrations(American Chemical Society, 2010) Horzum Polat, Nesrin; Boyacı, Ezel; Eroğlu, Ahmet Emin; Shahwan, Talal; Demir, Mustafa MuammerChitosan fibers showing narrow diameter distribution with a mean of 42 nm were produced by electrospinning and utilized for the sorption of Fe(III), Cu(II), Ag(I), and Cd(II) ions from aqueous solutions. The ion concentrations in the supernatant solutions were determined using inductively coupled plasma-mass spectrometry (ICP-MS). The filtration efficiency of the fibers toward these ions was studied by both batch and microcolumn methods. High efficiency in sorption of the metal ions was obtained in the both methods. The effects of sorbent amount (0.10−0.50 mg), shaking time (15−120 min), initial metal ion concentration (10.0−1000.0 μg·L−1), and temperature (25 and 50 °C) on the extent of sorption were examined. The sorbent amount did not significantly alter the efficiency of sorption; however, shaking time, temperature, and metal ion concentration were found to have a strong influence on sorption. By virtue of its mechanical integrity, the applicability of the chitosan mat in solid phase extraction under continuous flow looks promising.