Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Now showing 1 - 4 of 4
Article Performance of Sheet Pile Walls With Rubber-Modified Backfill(Springer, 2025) Ecemis, Nurhan; Kadekeshova, Kuralay; Khlaif, Ali HamidThis study investigates the behavior of clean sand and sand-rubber mixtures used as backfill materials behind sheet pile walls under vertical loads. Physical model experiments were conducted to assess lateral displacement and pressure for backfills containing 10% granulated rubber (2.5-5 mm) under both dry and saturated conditions, and across varying backfill inclination angles. To complement the experiments, discrete element method (DEM) simulations were performed to capture the micromechanical behavior of sand-rubber mixtures, enabling analysis of particle-scale interactions. Material stiffness and friction parameters were calibrated through direct shear tests to ensure computational efficiency and accurate representation. Comparative analyses were conducted between the DEM simulations and the physical sheet pile tests across various sand-rubber backfill configurations. The results suggest that sand-rubber mixtures offer a practical and sustainable alternative for backfill applications, improving both mechanical performance and pressure mitigation. Furthermore, force chain development and deformation patterns were thoroughly examined to understand the role of micro parameters; such as particle contact behavior, porosity, internal friction, and stiffness of the rubber-sand composite backfill in reducing active earth pressure against sheet pile walls.Article Citation - WoS: 20Citation - Scopus: 22Fabrication and Properties of Novel Porous Ceramic Membrane Supports From the (sig) Diatomite and Alumina Mixtures(Elsevier, 2022) Aouadja, Faycal; Bouzerara, Ferhat; Güvenç, Çetin Meriç; Demir, Mustafa M.In this paper, the manufacturing of macro-porous tubular ceramic supports for membranes is described. The novel supports are fabricated from natural diatomite and alumina raw materials using the extrusion method. The structure was analyzed by X-ray diffraction (XRD) and mercury porosimetry techniques; the presence of possible defects was investigated by scanning electron microscopy (SEM). The permeability has been measured from water flux in standard experiments. Experimental results show that the open porosity, the average pore size (APS), the pore size distribution, the strength, and the permeability of sintered supports, have been found to depend, mainly on the concentration of alumina (Al2O3) additive. Supports prepared with the addition of 10 wt.% of alumina and sintered at 1200 degrees C, can be considered as the most optimized; they have a porosity ratio of about 46%, an APS is around 7.7 mu m, a flexural strength value of about 28 MPa, and water permeability of around 15 m(3)h(-1) m(-2) bar(-1). Such materials could be of great interest in the supports fabrication for membrane application, for instance, water filtration. (C) 2021 SECV. Published by Elsevier Espana, S.L.U.Article Citation - WoS: 3Citation - Scopus: 3Feasible Packing of Granular Materials in Discrete-Element Modelling of Cone-Penetration Testing(Taylor and Francis Ltd., 2018) Ecemiş, Nurhan; Bakunowicz, PaulinaThis paper explores how the discrete-element method (DEM) was found to play an increasingly important role in cone penetration test (CPT) where continuum-mechanics-based analysis tools are insufficient. We investigated several crucial features of CPT simulations in the two-dimensional DEM. First, the microparameters (stiffness and friction) of discrete material tailored to mimic clean, saturated sand, which is used in cone-penetration tests, were calibrated by curve-fitting drained triaxial tests. Then, three series of cone-penetration simulations were conducted to explore (1) top boundary conditions, (2) reasonable size of discrete particles at different initial porosities, and (3) limit initial porosity of the model for a balance between accurate representation and computational efficiency. Further, we compared the cone-penetration resistance obtained in the laboratory and numerical simulations for the range of relative densities.Article Citation - WoS: 36Citation - Scopus: 38Investigation on Glassy Skin Formation of Porous Polystyrene Fibers Electrospun From Dmf(BME-PT, 2010) Demir, Mustafa MuammerMicrometer and submicrometer diameter of polystyrene (PS) fibers were electrospun from various dimethyl formamide (DMF) solutions at different weight fractions under 35% relative humidity. Increasing polymer fraction in the solution results in a gradual morphological transition from beads-with-incipient to bead-free fibers and also increases the diameter. The formation of uniform glassy skin presumably due to radial capillary flow within the liquid jet was confirmed by scanning electron microscope. The thickness of the skin varies with the weight fraction of PS; therefore, it was normalized with respect to average fiber diameter (AFD). The skin gets thinner as the weight fraction of PS increases. In addition, the fibers exhibit highly porous internal structure and smooth surface along with slight porosity. The development of porosity is attributed to liquid-liquid phase separation of water molecules in atmospheric moisture and DMF.