Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Now showing 1 - 6 of 6
Article Citation - WoS: 1Citation - Scopus: 1Synthesis of Pristine Chitosan Foams with Enhanced Pore Structure, Surface Area, and Mechanical Strength for Tissue Engineering Applications(Iop Publishing Ltd, 2025) Polat, M.; Cropper, Chelsea; Ozdamar, A. B.; Polat, H.With its excellent biocompatibility, biodegradability, and antimicrobial activity, chitosan is a promising scaffold material for hard-tissue engineering. Yet, pristine chitosan foams typically lack the strength and porosity required for such use. Here we present a simple emulsion-templating approach to fabricate pristine chitosan foams with optimized strength and porosity. Sodium dodecyl sulfate (SDS), a widely used biocompatible anionic surfactant, was employed at trace levels to aid polymerization. The foams display a dual-scale pore morphology. Cavities of 150-300 mu m are separated by around 50 mu m thick chitosan walls containing large interconnecting openings. The walls are further populated with meso- and macropores of 50-500 nm. This architecture should support cell attachment and growth, facilitate proliferation, and enhance nutrient transport and metabolic exchange. The structure yields high surface area (up to 10 m2 g-1). Mechanically, the thick-walled cavities impart both elastic recovery and high compressive resistance (255 kPa at 40% strain from foams polymerized with 4% chitosan). A preliminary drug-release study using vancomycin confirmed excellent loading and sustained release.Article Citation - WoS: 5Citation - Scopus: 5The Designing of a Gel Formulation With Chitosan Polymer Using Liposomes as Nanocarriers of Amphotericin B for a Non-Invasive Treatment Model of Cutaneous Leishmaniasis(Springer, 2022) Gürbüz, Nergiz; Çetin Uyanıkgil, Emel Öykü; Özbel, Yusuf; Töz, SerayPurpose Leishmaniasis is a disease caused by different Leishmania spp., which are transmitted to humans by a bite of infected female sand flies. Cutaneous leishmaniasis (CL, oriental sore), visceral leishmaniasis (VL), and mucocutaneous leishmaniasis (MCL) are three main clinical forms, however, only CL and VL are seen in Turkey. Cutaneous leishmaniasis is characterized by skin lesion(s) and is one of the most important vector-borne diseases in Turkey with over 2000 cases reported annually in 40 out of 81 provinces. The treatment is usually made invasively and painfully by intralesional injection of pentavalent antimony compounds. Non-invasive and innovative treatment methods are needed as aimed in this study. Methods In the present study, one of the classical antileishmanial drugs, amphotericin B (AmB), encapsulated in liposomes was evaluated using non-invasive design based on chitosan, which is a nontoxic, biocompatible and biodegradable polymer. To avoid the invasive effect of conventional intralesional needle application, the drug was encapsulated in liposomes and incorporated into a chitosan gel for applying topically on the skin lesion. The efficacy of encapsulation of amphotericin B into liposomes and the drug release from liposomes were studied. The chitosan gel was evaluated for viscosity, flowability, appearance and pH. The efficacy of the drug embedded into chitosan gel, liposomal AmB alone and chitosan gel alone in four different concentrations was also tested using Leishmania spp. promastigotes in vitro. Results The findings have shown that AmB was encapsulated into the liposomes with high efficiency (86.6%) and long-term physical and chemical stability. Therefore, designed liposomal formulation was suitable for sustained release. The appearance of the drug-embedded chitosan gel was transparent and appropriate. Chitosan gels showed non- Newtonian behavior and plastic flow. The liposomal AmB also showed higher efficacy with no parasites in all concentrations while drug embedded into chitosan gel and chitosan gel alone were effective in two higher concentrations. The lower efficacy of the drug-embedded chitosan gel in 24 h in in-vitro study was probably due to slow release of the drug. Conclusion The gel design created in this study will provide ease of use for the lesions of CL patients that do not have a specific number, size, and shape. Follow-up studies by the ex-vivo macrophage infection model with Leishmania intracellular amastigote forms and Leishmania-infected animal models are needed to understand the present design's efficacy better.Article Citation - WoS: 25Citation - Scopus: 33Novel Phytochemical Cissus Quadrangularis Extract-Loaded Chitosan/Na-carboxymethyl Cellulose-Based Scaffolds for Bone Regeneration(SAGE Publications, 2018) Tamburacı, Sedef; Kimna, Ceren; Tıhmınlıoğlu, FundaMedicinal plants are attracting considerable interest as a potential therapeutic agent for bone tissue regeneration. Cissus quadrangularis L. is also a medicinal plant known with its osteogenic activity. In this study, a phytochemical scaffold was produced by incorporating Cissus quadrangularis with chitosan/Na-carboxymethyl cellulose blend by lyophilization technique. The effect of Cissus quadrangularis loading on the mechanical, morphological, chemical, and degradation properties as well as in vitro cytotoxicity, cell proliferation, and differentiation of the composites was investigated. Scanning electron microscopy images showed that porous Cissus quadrangularis-loaded scaffolds were obtained with an average pore size of 148-209 mu m which is appropriate for bone regeneration. Cissus quadrangularis incorporation enhanced the compression modulus of scaffolds from 76 to 654 kPa. In vitro cell culture results indicated that Cissus quadrangularis/chitosan/Na-carboxymethyl cellulose scaffolds provided a favorable substrate for the osteoblast adhesion, proliferation, and mineralization. Results supported the osteoinductive property of the Cissus quadrangularis extract-incorporated scaffolds even without osteogenic media supplement. Cissus quadrangularis extract increased the alkaline phosphatase activity of the SaOS-2 cells on scaffolds on 7th and 14th days of incubation. The investigation of characterization and cell culture studies suggest that Cissus quadrangularis-loaded osteoinductive Cissus quadrangularis/chitosan/Na-carboxymethyl cellulose scaffold can serve as a potential biomaterial for bone tissue engineering applications.Article Citation - WoS: 2Citation - Scopus: 4Use of Electrospun Fiber Mats for the Remediation of Hypersaline Geothermal Brine(Desalination Publications, 2017) Çelik, Aslı; Koç, Gonca; Erdoğan, Emre; Shahwan, Talal; Baba, Alper; Demir, Mustafa MuammerGeothermal brines display high contents of various metal ions that can adversely affect surface and groundwater resources. Nevertheless, it is possible to sequestrate these metals and use some of them in certain engineering applications. The aim of this study was to fabricate electrospun chitosan fiber mats and remove heavy metal cations from geothermal brine of the Tuzla geothermal field (TGF) by employing these mats. TGF is located on the Biga Peninsula in the northwestern part of Turkey. The brine of TGF has high salinity (EC > 91 mS/cm) and high temperature (reservoir temperature is 173°C). The brine is rich in terms of metal cations. For instance, the concentration of lithium ion in geothermal fluid ranges from 17 to 35 mg/L, with little seasonal variations. A horizontal electrospinning setup was employed to obtain a non-woven mat comprising submicron diameter chitosan fibers at 2.0 kV∙cm−1. This material was then utilized as a stable membrane for the removal of metal ions present in the brine through sorption at 25°C overnight. The results showed that the chitosan fiber mats sequestrate various ions in the brine. Under the studied conditions, the material was capable of removing 46%, 44%, 50%, 44%, 40%, 67% and 48% of Li+, Mg2+, Ba2+, Sr2+, Mn2+, Ca2+ and K+ from the geothermal brine, respectively.Article Citation - WoS: 20Citation - Scopus: 23Rhodamine-Immobilised Electrospun Chitosan Nanofibrous Material as a Fluorescence Turn-On Hg2+ Sensor(John Wiley and Sons Inc., 2016) Horzum, Nesrin; Mete, Derya; Karakuş, Erman; Üçüncü, Muhammed; Emrullahoğlu, Mustafa; Demir, Mustafa MuammerA turn-on fluorescence sensing system for mercuric (Hg2+) ions relying on a modified rhodamine B–chitosan fluorophore moiety was developed. This novel sensing approach relies on the simultaneous electrospinning of chitosan and rhodamine B hydrazide with phenylisothiocyanate functionality in hexafluoroisopropanol solution at 3.4 kV cm−1. The electrospun mats exhibited not only considerably enhanced fluorescence intensity in the presence of mercury ions, a result attributed to the ring opening of the spirolactam unit of the rhodamine-based fluorophore, but also a remarkably high sensitivity and selectivity toward Hg2+. In effect, the strategy has the potential to open new avenues in the design and development of other high-performance nanofibrous sensing materials for detecting target metal species of environmental interest.Article Citation - WoS: 14Citation - Scopus: 15Chitosan-Immobilized Pumice for the Removal of As(v) From Waters(Springer Verlag, 2014) Turan, Dilek; Kocahakimoğlu, Cemre; Boyacı, Ezel; Sofuoğlu, Sait Cemil; Eroğlu, Ahmet EminA novel sorbent, chitosan-immobilized pumice, has been prepared for the sorption of As(V) from waters prior to its determination by hydride generation atomic absorption spectrometry. The success of the immobilization has been checked with such characterization techniques as scanning electron microscopy, thermal gravimetric analysis, and elemental analysis. Points of zero charge of the sorbents were determined with potentiometric mass titration. Batch-type equilibration studies have shown that the novel sorbent can be employed at a wide pH range resulting in quantitative sorption (>90 %) at pH 3.0-7.0 and greater than 70 % sorption at pH >8.0. These results demonstrate the advantage of immobilizing chitosan onto pumice, because, under the same conditions, pumice displays <20 % sorption toward As(V), whereas chitosan gives approximately 90%sorption only at pH 3.0. The validity of the method was verified through the analysis of ultrapure, bottled drinking, and tap water samples spiked with arsenate; the respective sorption percentages of 93.2 (±0.7), 89.0 (±1.0), and 80.9 (±1.3) were obtained by batch-type equilibration. Arsenic sorption was also examined in the presence of common interfering ions resulting in competing effects of PO3- 4 and NO- 3on As(V) adsorption.