Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Now showing 1 - 3 of 3
Article Citation - WoS: 1Citation - Scopus: 1Influence of Processing Method of Cocrmo Dental Alloy on the Corrosion Behavior in Artificial Saliva(Wiley, 2022) Pontes, Joana R.; Pinto, Ana M. P.; Ariza, Edith; Alves, Alexandra C.; Toptan, FatihRemovable or fixed dental frameworks are usually made of CoCr alloys. The CoCr dental alloys are produced traditionally by lost-wax casting. However, alternative processing routes, such as hot-pressing, are being studied for dental applications. The purpose of the present work was to assess the corrosion resistance of CoCrMo dental alloy produced by conventional lost-wax casting and hot-pressing. The corrosion behavior was studied in artificial saliva at 37°C by potentiodynamic polarisation tests. Immersion tests were performed to evaluate the growth of the passive film where electrochemical impedance spectroscopy was used at different immersion periods. Results showed slightly better corrosion resistance in terms of ipass for CoCrMo samples obtained by hot-pressing. On the other hand, the immersion tests showed a more stable and thicker passive film formed on hot-pressed CoCrMo dental alloy, pointing out that hot-pressing may be considered a promising technique to produce CoCrMo dental structures.Article Citation - WoS: 2Citation - Scopus: 2Reliability of Corroded Steel Members Subjected To Elastic Lateral Torsional Buckling(Korean Society of Steel Construction, 2021) Uzun, Ertuğrul Türker; Aktaş, EnginStructural steel members are subjected to corrosion due to environmental condition. As a result, there is decreasing in the cross-section properties of the member. This causes different stability problems and reduction in the load carrying capacity of members. Then, the probability of failure, P-f increases due to corrosion. The need arises to determine expected level of safety for such members and systems. Besides, reliability of the steel structure is also effected by the structural stability problems that result decreasing in the resistance. Lateral torsional buckling is one of the most encountered problems in steel members and affected by the critical moment which is a function of lateral and torsional stiffness. Critical moment depends on the material properties, boundary conditions, unbraced length, load pattern, and the member's cross section. Under the corrosion, it is inevitable to observe changing in some of properties. In this study, a damage model to determine the reliability of a corroded I-shape steel member under linear moment gradient is developed considering corrosion exposure time. Uniform and varying thickness loss models are considered to show the corrosion effect. Influence of environmental condition on the load carrying capacity of the members is considered and their effects on member design is evaluated. As a result, it is concluded that load carrying capacity of steel members degrades and safety of them adversely effected. With presented formulas, it is ensured that the load carrying capacity and reliability indices of the steel members can be calculated practically under the examined situationsArticle Citation - WoS: 2Citation - Scopus: 3Use of Combination of Accelerator-Based Ion-Beam Analysis Techniques To the Investigation of the Corrosion Behavior of Cocrmo Alloy(Elsevier Ltd., 2014) Noli, F.; Misaelides, P.; Lagoyannis, A.; Pichon, L.; Öztürk, OrhanNuclear Reaction Analysis - NRA in combination with d-RBS (Ed: 1.35 MeV) was applied in order to investigate the corrosion behavior of CoCrMo alloy. The corrosion resistance of the alloy was compared to that of modified CoCrMo samples by several techniques as plasma nitriding and oxidizing at moderate temperature (∼400 °C). Electrochemical techniques in simulated body fluid 0.9% NaCl (37 °C) were applied in order to accelerate the corrosion process. The nitrogen depth distribution before and after the corrosion was determined using the 14N(d,α)12C and the 14N(d,p)15N nuclear reactions whereas the oxygen by the 16O(d,p)17O. The surface morphology and microstructure was investigated using microscopy techniques. It was found that surface treatments produce thick nitrided layers (5-6 μm) consisting of a supersaturated nitrogen solution (nitrogen concentration is ∼30 at.%) in the matrix (expanded phase γN) and a thin oxygen solution (0.3 μm). The samples subjected to plasma nitridation and oxidation exhibited the lowest deterioration and better resistance to corrosion compared to the single nitrided or single oxidized and the untreated material. This could be attributed to the modified surface region with the high nitrogen content and the presence of oxygen.