Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
26 results
Search Results
Now showing 1 - 10 of 26
Article Citation - Scopus: 17Fabrication, Characterization, and Adsorption Applications of Low-Cost Hybride Activated Carbons From Peanut Shell-Vinasse Mixtures by One-Step Pyrolysis(Springer Science and Business Media Deutschland GmbH, 2023) Arslanoğlu, E.; Eren, M.Ş.A.; Arslanoğlu, H.; Çiftçi, H.The present work aims to develop an innovative, alternative, fast, and cost-effective one-step pyrolysis method for activated carbon production using peanut shell and vinasse mixture. This facile procedure is based on single-step carbonization treatment at a temperature range of 400–800 °C. Different carbonization time (15–360 min), impregnation ratio (1–3 g/g), impregnation time (3–24 h), and nitrogen flow rate (300 and 600 ml/min) were examined. The chemical and physical properties of the activated carbon examined by SEM-EDX, FT-IR analysis, particle size distribution, iodine number, pHzpc, BET surface area, and surface functional group analysis by Boehm’s titration. The results illustrate that the values of BET surface area, total pore volume, average pore diameter, iodine number, pHzpc, and carbon content of activated carbon were found as 1290.5 m2/g, 0.5667 cm3/g, 21.2 Å, 1258.4 mg/g, 5.7, and 86.89%, respectively. Graphical Abstract: [Figure not available: see fulltext.]. © 2021, The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.Article Citation - Scopus: 7Modification of Grape Pulp With Citric Acid for the Production of Natural Ion Exchanger Resin and Removal of Pb (ii) and Cd (ii) From Aqueous Solutions: Kinetic, Thermodynamics, and Mechanism(Springer Science and Business Media Deutschland GmbH, 2023) Arslanoğlu, E.; Eren, M.Ş.A.; Arslanoğlu, H.; Çiftçi, H.In this study, grape pulp (MGP) modified with NaOH and citric acid was used in the production of natural ion exchangers. The effects of parameters such as initial pH, MGP dosage, temperature, initial metal ion concentration, and contact time on the removal of Pb (II) and Cd (II) ions from aqueous solutions using modified materials were investigated by batch experiments. It was found that the experimental kinetic data fit the second-order model, and the activation energy for Pb (II) and Cd (II) adsorption processes were 20.68 and 38.61 kj mol−1, respectively. Although the initial adsorption rate increases with increasing temperature, the adsorption efficiency slightly decreases. It was calculated that the equilibrium data fit the Langmuir isotherm better, and the maximum adsorption capacities for Pb (II) and Cd (II) adsorption processes were approximately 1.496 and 1.022 mmol g−1 at 25 °C, respectively. Thermodynamic analysis has shown that the adsorption processes of Pb (II) and Cd (II) are exothermic (ΔH°Pb = −35.68 kj mol−1, ΔH°Cd = −21.19 kj mol−1) and have a self-developing character. Graphical abstract: [Figure not available: see fulltext.]. © 2021, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.Article Citation - WoS: 6Citation - Scopus: 6Synthesis of a Novel Cellulose-Based Adsorbent From Olive Tree Pruning Waste for Removal of Boron From Aqueous Solution(Springer Science and Business Media Deutschland GmbH, 2024) Altınbaş, B.F.; Yüksel, A.This work investigated the valorization of olive tree pruning debris as a biosorbent for the removal of environmentally hazardous boron from aqueous solution using batch adsorption. For this purpose, a novel, waste-based, boron selective biosorbent from olive tree pruning waste (N-OPW) was synthesized. Alkali pretreatment, followed by glycidyl-methacrylate (GMA) grafting and providing boron selectivity with n-methyl-d-glucamine (NMDG) steps, was applied to the biomass, respectively. N-OPW was characterized using SEM, TGA, and FT-IR analyses. N-OPW showed excellent boron biosorption capacity (21.80 mg/g) in an operation pH range between 2 and 12. The equilibrium was attained in 2 h and the Freundlich isotherm (R2 = 0.997) and pseudo-second-order kinetics (R2 = 0.99) provided the strongest match to experimental data. According to thermodynamic studies, boron adsorption was exothermic (ΔH = −34.14 kJ/mol). The reusability tests with real geothermal water showed that adsorbent had no significant decrease in boron removal capacity while desorbing >99% of the boron adsorbed for three cycles of adsorption/desorption. Results indicated that a promising, reusable, and boron selective biosorbent was successfully synthesized while utilizing olive pruning waste. Graphical abstract: (Figure presented.) © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2023.Article Citation - WoS: 49Citation - Scopus: 54Highly Porous Poly(o-Phenylenediamine) Loaded Magnetic Carboxymethyl Cellulose Hybrid Beads for Removal of Two Model Textile Dyes(Springer, 2022) Arıca, Tuğçe Aybüke; Balcı, Fadime Mert; Balcı, Sinan; Arıca, Mehmet YakupEnsuring the removal of complex dyes from wastewater is a topic of great interest as it is vital for the environment. The present study reports a facile preparation method for poly(o-phenylenediamine) [p(o-PDA)] micro-particles loaded to magnetic carboxymethyl cellulose (CMC) hydrogel beads as adsorbents. The prepared products were characterized by FTIR, TGA, VSM, SEM, BET, and zeta sizer. The Fe3O4@p(o-PDA)@CMC beads were used for the removal of Reactive Blue 4 (RB-4) and Congo Red (CR) textile dyes from an aqueous medium. Different factors, such as adsorbent dose, initial pH, ionic strength, contact time, temperatures, and initial RB-4 and CR concentrations were examined. The maximum adsorption capacities of the RB-4 dye and CR at optimum pH 5 reached 398.7 and 524.6 mg/g in 120 min, respectively. The adsorption of RB-4 and CR on the hybrid magnetic beads can be due to the electrostatic, hydrogen bonding, and π-π interactions. Moreover, the magnetic hybrid beads showed easy regeneration ability and good reusability. The adsorbent can be a very good candidate for the efficient removal of micro-pollutant from wastewater.Article Citation - WoS: 10Citation - Scopus: 12Novel Hybrid Adsorption-Electrodialysis (aded) System for Removal of Boron From Geothermal Brine(American Chemical Society, 2022) Altınbaş, Bekir Fırat; Orak, Ceren; Ökten, Hatice Eser; Yüksel, AslıA novel hybrid adsorption-electrodialysis (AdED) system to remove environmentally harmful boron from geothermal brine was designed and effective operating parameters such as pH, voltage, and flow rate were studied. A cellulose-based adsorbent was synthesized from glycidyl methacrylate (GMA) grafted cellulose and modified with a boron selective n-methyl-d-glucamine (NMDG) group and characterized with SEM-EDX, FT-IR, and TGA analyses. Batch adsorption studies revealed that cellulose-based adsorbent showed a remarkable boron removal capacity (19.29 mg/g), a wide stable operating pH range (2-10), and an adsorption process that followed the Freundlich isotherm (R2= 0.95) and pseudo-second-order kinetics (R2= 0.99). In the hybrid AdED system, the optimum operating parameters for boron removal were found to be a pH of 10, a voltage of 10 V, a flow rate of 100 mL/min, and an adsorbent dosage of 4 g/L. The presence of the adsorbent in the hybrid system increased boron removal from real geothermal brine (containing 199 ppm boron) from 7.2% to 73.3%. The results indicate that the designed AdED system performs better than bare electrodialysis for boron removal from ion-rich real geothermal brine while utilizing environmentally friendly cellulose-based adsorbent.Article Citation - WoS: 18Citation - Scopus: 22Effect of Fomes Fomentarius Cultivation Conditions on Its Adsorption Performance for Anionic and Cationic Dyes(American Chemical Society, 2022) Henning, Laura M.; Simon, Ulla; Abdullayev, Amanmyrat; Schmidt, Bertram; Pohl, Carsten; Nunez Guitar, Tamara; Ahmetoğlu, Çekdar Vakıf; Meyer, Vera; Bekheet, Maged F.; Gurlo, AleksanderLab-cultivated mycelia of Fomes fomentarius (FF), grown on a solid lignocellulose medium (FF-SM) and a liquid glucose medium (FF-LM), and naturally grown fruiting bodies (FF-FB) were studied as biosorbents for the removal of organic dyes methylene blue and Congo red (CR). Both the chemical and microstructural differences were revealed using X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, zeta potential analysis, and scanning electron microscopy, illuminating the superiority of FF-LM and FF-SM over FF-FB in dye adsorption. The adsorption process of CR on FF-LM and FF-SM is best described by the Redlich-Peterson model with β constants close to 1, that is, approaching the monolayer Langmuir model, which reach maximum adsorption capacities of 48.8 and 13.4 mg g-1, respectively, in neutral solutions. Adsorption kinetics follow the pseudo-second-order model where chemisorption is the rate-controlling step. While the desorption efficiencies were low, adsorption performances were preserved and even enhanced under simulated dye effluent conditions. The results suggest that F. fomentarius can be considered an attractive biosorbent in industrial wastewater treatment and that its cultivation conditions can be specifically tailored to tune its cell wall composition and adsorption performance.Article Citation - WoS: 15Citation - Scopus: 17Fabrication, Characterization, and Adsorption Applications of Low-Cost Hybride Activated Carbons From Peanut Shell-Vinasse Mixtures by One-Step Pyrolysis(Springer, 2021) Arslanoğlu, Esra; Eren, Muhammet Şakir Abdullah; Arslanoğlu, Hasan; Çiftçi, HarunThe present work aims to develop an innovative, alternative, fast, and cost-effective one-step pyrolysis method for activated carbon production using peanut shell and vinasse mixture. This facile procedure is based on single-step carbonization treatment at a temperature range of 400-800 degrees C. Different carbonization time (15-360 min), impregnation ratio (1-3 g/g), impregnation time (3-24 h), and nitrogen flow rate (300 and 600 ml/min) were examined. The chemical and physical properties of the activated carbon examined by SEM-EDX, FT-IR analysis, particle size distribution, iodine number, pH(zpc), BET surface area, and surface functional group analysis by Boehm's titration. The results illustrate that the values of BET surface area, total pore volume, average pore diameter, iodine number, pH(zpc), and carbon content of activated carbon were found as 1290.5 m(2)/g, 0.5667 cm(3)/g, 21.2 angstrom, 1258.4 mg/g, 5.7, and 86.89%, respectively.Article Citation - WoS: 104Citation - Scopus: 107Poly(dopamine) Grafted Bio-Silica Composite With Tetraethylenepentamine Ligands for Enhanced Adsorption of Pollutants(Institution of Chemical Engineers, 2019) Arıca, Tuğçe Aybüke; Kuman, Merve; Gerçel, Özgül; Ayas, ErhanIn this study, diatomite fossil particles (i.e., bio-silica) was treated with strong acid solution and coated with polydopamine (bio-silica-PDA) using aqueous-based bioinspired coating method. The bio-silica-PDA was grafted with tetraethylenepentamine (TEPA) ligand to increase binding sites on the material surfaces. The biosilica-PDA-TEPA particles was characterized using Fourier-transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM), X-Ray Diffraction (XRD) and Brunauer-Emmett-Teller (BET) method. The adsorption performance of the biosilica-PDA-TEPA particles was studied using a model dye (i.e., Direct Blue 74; DB-74) from aqueous solutions using biosilica-PDA as a control system. Batch system was used to optimize experimental conditions for the removal of DB-74 dye on the sorbents. The adsorption of DB-74 on the biosilica-PDA-TEPA particles was studied in the pH range of 2.0-8.0. The amount adsorbed DB-74 dye on the biosilica-PDA-TEPA was 363.3 mg g(-1) (using initial dye concentration 1200 mg L-1, pH 3.0 and temperature 25 degrees C). Adsorption of DB-74 dye on biosilica-PDA-TEPA particles fitted well Langmuir model. The equilibrium adsorption time was completed within 10 min and the experimental data was defined well by the pseudo-second-order model. In addition, the biosilica-PDA-TEPA particles presented a good performance after regeneration. This result show that the presented low-cost porous biosilica-PDA-TEPA particles can be a good candidate as a novel sorbent system for removal of micro-pollutants from wastewaters. (C) 2018 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.Other Macromol. Mater. Eng. 7/2016(Wiley, 2016) Isık, Tuğba; Horzum Polat, Nesrin; Yıldız, Ümit Hakan; Liedberg, Bo; Demir, Mustafa MuammerAn easy-to-use test platform toward the rapid diagnosis of many life-threating diseases was developed. DNA was isolated from the mixture of BSA+DNA using fibrous commodity polystyrene, which was extremely cheap and can be readily electrospun under ambient conditions. Surface modification with Au nanoparticles improved the performance of the fibrous membrane.Article Citation - WoS: 3Citation - Scopus: 5Adsorption Characteristics of Lead-, Barium- and Hydrogen-Rich Clinoptilolite Mineral(SAGE Publications Inc., 2003) Çakıcıoğlu Özkan, Seher Fehime; Ülkü, SemraThe carbon dioxide and water vapour adsorption properties of local clinoptilolite-rich material, both as the original and as lead-, barium- and hydrogen-rich forms, were examined. The lead- and barium-rich forms were prepared by treatment of the original clinoptilolite with Pb(NO3)2 and BaCl2 respectively, while the hydrogen-rich form was prepared by NH4Cl and heat treatment. Water and CO2 adsorption experiments were conducted in a volumetric system under static conditions, with low-pressure adsorption data being used for the characterization of the natural, Pb-rich, Ba-rich and H-rich clinoptilolite samples. Although the existence of barium-exchange was not noted, an appreciable decrease in CO2 adsorption was observed with the Pb-rich and H-rich forms due to a decrease in the electrostatic interaction between the surface and the adsorbate. Application of the Dubinin-Astakhov equation to the water adsorption data established the existence of micropores of different sizes that exhibited different adsorption mechanisms.
- «
- 1 (current)
- 2
- 3
- »