Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
10 results
Search Results
Now showing 1 - 10 of 10
Article Citation - WoS: 1Citation - Scopus: 1Synthesis of Pristine Chitosan Foams with Enhanced Pore Structure, Surface Area, and Mechanical Strength for Tissue Engineering Applications(Iop Publishing Ltd, 2025) Polat, M.; Cropper, Chelsea; Ozdamar, A. B.; Polat, H.With its excellent biocompatibility, biodegradability, and antimicrobial activity, chitosan is a promising scaffold material for hard-tissue engineering. Yet, pristine chitosan foams typically lack the strength and porosity required for such use. Here we present a simple emulsion-templating approach to fabricate pristine chitosan foams with optimized strength and porosity. Sodium dodecyl sulfate (SDS), a widely used biocompatible anionic surfactant, was employed at trace levels to aid polymerization. The foams display a dual-scale pore morphology. Cavities of 150-300 mu m are separated by around 50 mu m thick chitosan walls containing large interconnecting openings. The walls are further populated with meso- and macropores of 50-500 nm. This architecture should support cell attachment and growth, facilitate proliferation, and enhance nutrient transport and metabolic exchange. The structure yields high surface area (up to 10 m2 g-1). Mechanically, the thick-walled cavities impart both elastic recovery and high compressive resistance (255 kPa at 40% strain from foams polymerized with 4% chitosan). A preliminary drug-release study using vancomycin confirmed excellent loading and sustained release.Article Citation - WoS: 3Citation - Scopus: 3Development of Xylan-Coated Acid-Resistant Micellar Drug Carriers for Colon-Targeted Oral Delivery(Taylor & Francis As, 2024) Zeybek, Nuket; Polat, Hurriyet; Gulec, Sukru; Buyukkileci, Ali OguzOral delivery of hydrophobic drugs from the stomach through the colon has some requirements: (1) an acid-resistant carrier (2) a colon-specific drug release mechanism; and (3) an enhanced bioavailability. In this study, curcumin-loaded polymeric micelles with a xylan-based composite coating were designed and developed. For this purpose, a new synthesis method was used to precipitate xylan by concurrent chitosan polymerization at different xylan/chitosan ratios using a negatively charged crosslinking agent, TPP. The study was to provide the stability of the coated micellar structures in the stomach (low pH conditions) and their degradation in the colon (a natural environment of bacteria) to release the drug. It was observed that the coating successfully prevented early drug release up to 85%, depending on the fraction of xylan in the coating. The nanocarriers that first passed through the stomach conditions were incubated with a xylanolytic colonic bacterium (Bacteroides ovatus) to determine the bacterium-related release mechanism, which was around 27%. This shows the colon-specific release expectation of coated nanocarriers in the colon environment, with an additional benefit due to the degradation of xylan and an improvement in the colon environment by prebiotic activity.Article Citation - WoS: 5Citation - Scopus: 9Using Loofah Reinforced Chitosan-Collagen Hydrogel Based Scaffolds In-Vitro and In-Vivo; Healing in Cartilage Tissue Defects(Elsevier B.V., 2023) Baysan, G.; Gunes, O.C.; Turemis, C.; Akokay, Yilmaz, P.; Husemoglu, R.B.; Kara, Ozenler, A.; Perpelek, M.The herein article aims to report a new scaffold design as a loofah-reinforced chitosan-collagen hydrogel composite scaffold with three different cross-linker concentrations (0.1, 0.3, and 0.5 wt. /v%). From the analyses, the scaffold crosslinked with 0.5% genipin; collagen-chitosan hydrogel scaffold reinforced with loofah (L-CCol5) was found to be suitable for further in vitro and in vivo studies due to its interconnected porous structure, water content (∼ 97%) and tan delta (0.221 at 1 Hz) values comparable to that of cartilage tissue. In vitro analyses depicted that the L-CCol5 scaffold supported rabbit mesenchymal stem cells (rMSCs) adhesion and proliferation with its non-cytotoxic feature. Moreover, in vivo cartilage healing studies were performed using New Zealand male rabbits in three groups: empty control, cell-free scaffold, and rMSCs-laden scaffold. The elastic moduli of these three groups were 0.69, 0.90, and 1.18 MPa, respectively. Besides, microcomputer tomography (MicroCT) scannings supported the in vivo biomechanical analyses as cell-laden scaffolds showed better osteochondral healing. It can be concluded that the L-CCol5 scaffold could be a promising construct in osteochondral tissue engineering applications. The findings revealed that osteochondral remodeling precedes articular cartilage, providing insight into tailored therapeutic approaches, disease progress, and treatment consequences. © 2023 Acta Materialia Inc.Article Citation - WoS: 7Citation - Scopus: 8Thermoalkalophilic Recombinant Esterase Entrapment in Chitosan/Calcium Beads and Its Characterization(Wiley, 2021) Tercan, Cisem; Sürmeli, Yusuf; Şanlı Mohamed, GülşahBACKGROUND Esterases (EC 3.1.1.1), a class of hydrolases, degrade the ester bonds of lipids into alcohol and carboxylic acids and synthesize carboxylic ester bonds. They are used in a variety of biotechnological, industrial, environmental, and pharmaceutical applications due to their many valuable properties. Particularly, extremophilic esterases with many superior properties are of great interest for various reactions. Immobilization of enzymes may provide some advantages over free enzymes not only to improve the properties of enzymes but also to increase the reusability of biocatalyst in industrial applications. Therefore, many different immobilization applications for enzymes have been reported in various studies. To our knowledge, a thermophilic esterase has not so far been immobilized by entrapment using chitosan/calcium/alginate-blended beads. Here, we reported the immobilization of thermoalkalophilic recombinant esterase by entrapment using chitosan/calcium/alginate-blended beads, and then the entrapped esterase was characterized biochemically in details. RESULTS In the present study, a thermophilic recombinant esterase was immobilized by entrapment in chitosan/calcium/alginate-blended beads for the first time. The 0.5 mg mL(-1) purified recombinant esterase was entrapped in 1% chitosan, 2% alginate, and 0.7 M CaCl2 blended beads. The results showed that immobilization yield and entrapment efficiency of the entrapped esterase were 69.5% and 80.4%, respectively. SEM micrograph showed that the surface of the beads resembled a mesh and very compact structures. Chitosan/calcium/alginate-blended beads exhibited an 18.8% swelling ratio and had a moderate porous structure. The entrapment technique highly enhanced the thermostability of the esterase and shifted its optimum temperature from 65 to 80 degrees C. The immobilized esterase was very stable in a wide range of pH (8.5-11) displaying maximum activity at pH 9. ZnCl2 slightly increased the activity of immobilized esterase whereas several metal ions reduced the enzyme activity. When the enzyme was immobilized in chitosan/calcium/alginate-blended beads, its K-m increased about 2 times and V-max value decreased almost 1.5 times. Immobilization allowed repeated uses of the esterase having good operational stability in a continuous process. CONCLUSION The results revealed that the immobilization of a thermophilic recombinant esterase by entrapment in chitosan/calcium/alginate-blended beads exhibited considerably better compared to other immobilization processes with various entrapment strategies. (c) 2021 Society of Chemical Industry (SCI).Article Citation - WoS: 25Citation - Scopus: 33Novel Phytochemical Cissus Quadrangularis Extract-Loaded Chitosan/Na-carboxymethyl Cellulose-Based Scaffolds for Bone Regeneration(SAGE Publications, 2018) Tamburacı, Sedef; Kimna, Ceren; Tıhmınlıoğlu, FundaMedicinal plants are attracting considerable interest as a potential therapeutic agent for bone tissue regeneration. Cissus quadrangularis L. is also a medicinal plant known with its osteogenic activity. In this study, a phytochemical scaffold was produced by incorporating Cissus quadrangularis with chitosan/Na-carboxymethyl cellulose blend by lyophilization technique. The effect of Cissus quadrangularis loading on the mechanical, morphological, chemical, and degradation properties as well as in vitro cytotoxicity, cell proliferation, and differentiation of the composites was investigated. Scanning electron microscopy images showed that porous Cissus quadrangularis-loaded scaffolds were obtained with an average pore size of 148-209 mu m which is appropriate for bone regeneration. Cissus quadrangularis incorporation enhanced the compression modulus of scaffolds from 76 to 654 kPa. In vitro cell culture results indicated that Cissus quadrangularis/chitosan/Na-carboxymethyl cellulose scaffolds provided a favorable substrate for the osteoblast adhesion, proliferation, and mineralization. Results supported the osteoinductive property of the Cissus quadrangularis extract-incorporated scaffolds even without osteogenic media supplement. Cissus quadrangularis extract increased the alkaline phosphatase activity of the SaOS-2 cells on scaffolds on 7th and 14th days of incubation. The investigation of characterization and cell culture studies suggest that Cissus quadrangularis-loaded osteoinductive Cissus quadrangularis/chitosan/Na-carboxymethyl cellulose scaffold can serve as a potential biomaterial for bone tissue engineering applications.Article Citation - WoS: 15Citation - Scopus: 15Bodipy-Conjugated Chitosan Nanoparticles as a Fluorescent Probe(Taylor and Francis Ltd., 2017) Bor, Gizem; Üçüncü, Muhammed; Emrullahoğlu, Mustafa; Tomak, Aysel; Şanlı Mohamed, GülşahRecently, development of fluorescent nanoparticle-based probes for various bioimaging applications has attracted great attention. This work aims to develop a new type fluorescent nanoparticle conjugate and evaluate its cytotoxic effects on A549 and BEAS 2B cell lines. Throughout the study, ionically crosslinked chitosan nanoparticles (CNs) were conjugated with carboxylated 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY-COOH). The results of conjugates (BODIPY-CNs) were investigated with regard to their physic-chemical, optical, cytotoxic properties and cellular internalization. The morphology of BODIPY-CNs was found to be spherical in shape and quite uniform having average diameter of 70.25 ± 11.99 nm. Cytotoxicty studies indicated that although BODIPY-COOH itself was quite toxic on both A549- and BEAS 2B-treated cells, CNs increased the cell viability of both cell lines via conjugation to BODIPY-COOH fluorescent molecule up to 67% for A549 and 74% for BEAS 2B cells. These results may suggest a possible utilization of the new fluorescent nanoparticle-based probe for bioimaging in biology and medicine.Article Citation - WoS: 53Citation - Scopus: 60Properties of N-Eicosane Silk Fibroin-Chitosan Microcapsules(John Wiley and Sons Inc., 2011) Başal, Güldemet; Şirin Deveci, Senem; Yalçın, Dilek; Bayraktar, OğuzPCM microcapsules containing n-eicosane were prepared by complex coacervation of silk fibroin (SF) and chitosan (CHI). Chemical characterization of microcapsules was carried out using Fourier-transform infrared (FT-IR) spectroscopy. Thermal properties and thermal stability of microencapsulated n-eicosane were determined by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). FTIR spectra confirmed the encapsulation of n-eicosane within the microcapsules. Results from thermal analyses showed that microcapsules consisted of an average of 45.7 wt % n-eicosane, and had a thermal energy storage and release capacity of about 93.04 J/g and 89.68 J/g, respectively.Article Citation - WoS: 15Citation - Scopus: 21Preparation, Characterization and Optimization of Chitosan Nanoparticles as Carrier for Immobilization of Thermophilic Recombinant Esterase(Taylor and Francis Ltd., 2011) İlgü, Hüseyin; Turan, Taylan; Şanlı Mohamed, GülşahImmobilization of biologically important molecules on myriad nano-sized materials has attracted great attention. Through this study, thermophilic esterase enzyme was obtained using recombinant DNA technology and purified applying one-step His-Select HF nickel affinity gel. The synthesis of chitosan was achieved from chitin by deacetylation process and degree of deacetylation was calculated as 89% by elemental analysis. Chitosan nanoparticles were prepared based on the ionic gelation of chitosan with tripolyphosphate anions. The physicochemical properties of the chitosan and chitosan nanoparticles were determined by several methods including SEM (Scanning Electron Microscopy), FT-IR (Fourier Transform Infrared Spectroscopy) and DLS (Dynamic Light Scattering). The morphology of chitosan nanoparticles was spherical and the nanospheres' average diameter was 75.3 nm. The purified recombinant esterase was immobilized efficiently by physical adsorption onto chitosan nanoparticles and effects of various immobilization conditions were investigated in details to develope highly cost-effective esterase as a biocatalyst to be utilized in biotechnological purposes. The optimal conditions of immobilization were determined as follows; 1.0 mg/mL of recombinant esterase was immobilized on 1.5 mg chitosan nanoparticles for 30 min at 60C, pH 7.0 under 100 rpm stirring speed. Under optimized conditions, immobilized recombinant esterase activity yield was 88.5%. The physicochemical characterization of enzyme immobilized chitosan nanoparticles was analyzed by SEM, FT-IR and AFM (Atomic Force Microscopy).Article Citation - WoS: 29Citation - Scopus: 32Optimization of Lactic Acid Production From Whey by L Casei Nrrl B-441 Immobilized in Chitosan Stabilized Ca-Alginate Beads(John Wiley and Sons Inc., 2005) Göksungur, Mehmet Yekta; Gündüz, Meltem; Harsa, Hayriye ŞebnemThe production of lactic acid from whey by Lactobacillus casei NRRL B-441 immobilized in chitosan-stabilized Ca-alginate beads was investigated. Higher lactic acid production and lower cell leakage were observed with alginate-chitosan beads compared with Ca-alginate beads. The highest lactic acid concentration (131.2 g dm-3) was obtained with cells entrapped in 1.3-1.7 mm alginate-chitosan beads prepared from 2% (w/v) Na-alginate. The gel beads produced lactic acid for five consecutive batch fermentations without marked activity loss and deformation. Response surface methodology was used to investigate the effects of three fermentation parameters (initial sugar, yeast extract and calcium carbonate concentrations) on the concentration of lactic acid. Results of the statistical analysis showed that the fit of the model was good in all cases. Initial sugar, yeast extract and calcium carbonate concentrations had a strong linear effect on lactic acid production. The maximum lactic acid concentration of 136.3 g dm-3 was obtained at the optimum concentrations of process variables (initial sugar 147.35 g dm-3, yeast extract 28.81 g dm-3, CaCO3 97.55 g dm-3). These values were obtained by fitting of the experimental data to the model equation. The response surface methodology was found to be useful in optimizing and determining the interactions among process variables in lactic acid production using alginate-chitosan-immobilized cells.Article Citation - WoS: 20Citation - Scopus: 23Rhodamine-Immobilised Electrospun Chitosan Nanofibrous Material as a Fluorescence Turn-On Hg2+ Sensor(John Wiley and Sons Inc., 2016) Horzum, Nesrin; Mete, Derya; Karakuş, Erman; Üçüncü, Muhammed; Emrullahoğlu, Mustafa; Demir, Mustafa MuammerA turn-on fluorescence sensing system for mercuric (Hg2+) ions relying on a modified rhodamine B–chitosan fluorophore moiety was developed. This novel sensing approach relies on the simultaneous electrospinning of chitosan and rhodamine B hydrazide with phenylisothiocyanate functionality in hexafluoroisopropanol solution at 3.4 kV cm−1. The electrospun mats exhibited not only considerably enhanced fluorescence intensity in the presence of mercury ions, a result attributed to the ring opening of the spirolactam unit of the rhodamine-based fluorophore, but also a remarkably high sensitivity and selectivity toward Hg2+. In effect, the strategy has the potential to open new avenues in the design and development of other high-performance nanofibrous sensing materials for detecting target metal species of environmental interest.