Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Now showing 1 - 4 of 4
Article Citation - WoS: 8Citation - Scopus: 9Dynamic Computational Wear Model of Peek-On Bearing Couple in Total Hip Replacements(Elsevier, 2023) Alpkaya, Alican Tuncay; Mihçin, ŞenayUnderstanding wear mechanisms is a key factor to prevent primary failures causing revision surgery in total hip replacement (THR) applications. This study introduces a wear prediction model of (Polyetheretherketone) PEEK-on-XLPE (cross-linked polyethylene) bearing couple utilized to investigate the wear mechanism under 3D-gait cycle loading over 5 million cycles (Mc). A 32-mm PEEK femoral head and 4-mm thick XLPE bearing liner with a 3-mm PEEK shell are modeled in a 3D explicit finite element modeling (FEM) program. The volumetric and linear wear rates of XLPE liner per every million cycles were predicted as 1.965 mm3/Mc, and 0.0032 mm/Mc respectively. These results are consistent with the literature. PEEK-on-XLPE bearing couple exhibits a promising wear performance used in THR application. The wear pattern evolution of the model is similar to that of conventional polyethylene liners. Therefore, PEEK could be proposed as an alternative material to the CoCr head, especially used in XLPE-bearing couples. The wear prediction model could be utilized to improve the design parameters with the aim of prolonging the life span of hip implants. © 2023Conference Object Behavior and Modeling of Shear-Critical Rc Beams Under Impact Loading(American Concrete Institute, 2010) Saatçi, Selçuk; Vecchio, Frank J.The lack of a complete understanding of shear behavior under high dynamic conditions hindered the efforts for accurate prediction of impact behavior, since severe shear mechanisms may dominate the behavior of RC structures when subjected to impact loads. This current study involves a well-instrumented experimental program that was undertaken to contribute to our understanding of the effects of shear mechanisms on the behavior of reinforced concrete (RC) structures under impact loads. The test results showed that the shear characteristics of the RC beam specimens played an important role in their overall behavior. All specimens, regardless of their shear capacity, developed severe diagonal shear cracks, forming a shear-plug under the impact point. Furthermore, the application of the Disturbed Stress Field Model (DSFM) as an advanced method of modeling shear behavior under impact conditions is also investigated. A two-dimensional nonlinear finite element reinforced concrete analysis program (VecTor2), developed previously for static loads, was modified to include the consideration of dynamic loads such as impacts. VecTor2 analyses of the test specimens were satisfactory in predicting damage levels, and maximum and residual displacements. The methodology employed by VecTor2, based on the DSFM, proved to be successful in predicting the shear-dominant behavior of the specimens under impact.Article Citation - WoS: 123Citation - Scopus: 139Quasi-Static Axial Crushing of Extruded Polystyrene Foam-Filled Thin-Walled Aluminum Tubes: Experimental and Numerical Analysis(Elsevier Ltd., 2006) Aktay, Levent; Toksoy, Ahmet Kaan; Güden, MustafaThe experimental and numerical quasi-static crushing responses of extruded closed cell polystyrene foam-filled thin-walled aluminum tubes were investigated. The numerical crash analysis of empty and foam-filled tubes was performed using the explicit finite element code PAM-CRASH™. Satisfactory agreements were generally achieved between the finite element model and experimental deformed shapes, load–displacements, fold lengths and specific energy absorptions. The model and experiments have also highlighted the several effects of foam filling on the crushing of thin-walled tubes. The energy absorptions in foam-filled tubes were further shown to be higher than the sum of the energy absorptions of empty tube (alone) and filler (alone).Article Citation - Scopus: 31Quasi-Static Axial Crushing Behavior of Honeycomb-Filled Thin-Walled Aluminum Tubes(Bentham Science Publishers B.V., 2011) Aktay, Levent; Çakıroğlu, Cem; Güden, MustafaThe experimental and numerical quasi-static crushing behaviors of Nomex™ honeycomb-filled thin-walled Al tubes were investigated. The honeycomb filler was modeled using a unit cell model. The numerical model and experimental results have shown that, 6.4 mm and 4.8 mm cell size honeycomb filling had no effect on the deformation mode (diamond); however 3.2 mm cell size honeycomb filling changed the deformation mode to mixed/concertina. Honeycomb filling was also shown to increase the specific energy absorption of filled tubes over that of Al tube. The specific energy absorption of honeycomb filling was further compared with those of tube wall thickening and Al closedcell foam filling.