Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Now showing 1 - 4 of 4
Article Citation - WoS: 5Citation - Scopus: 5Estimation of Settlement-Induced Damage in Masonry Buildings From Displacement Measurements(Pergamon-elsevier Science Ltd, 2025) Liu, Yiyan; Burd, Harvey; Gulen, Derya Burcu; Dalgic, Korhan Deniz; Gilson, Ben; Ilki, Alper; Acikgoz, SinanIn current engineering practice, building damage due to nearby ground excavation activities is typically quantified by processing displacement measurements. Building displacements at discrete points are used to determine deflection measures (such as angular distortion) which are then employed to estimate building strains using elastic beam models; damage is subsequently categorised according to the limiting tensile strain criteria. The reliability of this procedure relies on the extent to which the equivalent beam models employed in the analysis provide a realistic representation of the building behaviour. However, few published investigations are available on this issue. The current paper provides an appraisal of displacement-based building damage estimation techniques by employing digital image correlation displacement data collected from a recent experimental campaign on the settlement response of three half-scale masonry buildings. The results demonstrate that the treatment of buildings with equivalent beam models does not capture building deformation kinematics, potentially leading to inaccurate estimations of damage severity and location. An alternative strain interpretation procedure, inspired by an equivalent frame idealisation of a building fa & ccedil;ade with openings, is proposed. This procedure, which uses a limited number of displacement measurements, offers a robust interpretation of strains. Its effectiveness in estimating damage is assessed through experimental data. It is demonstrated that the current limiting tensile strain criteria need to be modified to provide a reliable estimation of crack widths when using the equivalent frame idealisation.Article Citation - WoS: 13Citation - Scopus: 14Damage To Monumental Masonry Buildings in Hatay and Osmaniye Following the 2023 Turkey Earthquake Sequence: the Role of Wall Geometry, Construction Quality, and Material Properties(SAGE Publications Inc., 2024) Bozyigit,B.; Ozdemir,A.; Donmez,K.; Dalgic,K.D.; Durgut,E.; Yesilyurt,C.; Acikgoz,S.This article reports on the findings of an investigation on 29 historic stone masonry buildings located in the cities of Hatay and Osmaniye following the 2023 Turkey earthquake sequence. The earthquake couplet on 6 February (with moment magnitudes 7.8 and 7.5) and the following events (including another earthquake which occurred on 20 February with a moment magnitude of 6.3) resulted in significant damage to the buildings. To understand why, the examined buildings were assigned an EMS-98 damage level (ranging from 1 to 5) and descriptive response categories (masonry disaggregation, local mechanism, and global response). Overall damage statistics indicated that masonry disaggregation was common and coterminous with local mechanism response. Wall geometry and construction quality indices were then investigated to explore why these were the dominant damage mechanisms. Wall geometry indices highlighted insufficient amount of walls to resist the local seismic demands, particularly in the transverse (e.g. short) direction of buildings. This deficit promoted the formation of local mechanisms. Construction quality indices suggested that stone layouts did not enable interlocking and that the walls were prone to disaggregation. To further investigate the role of material properties on the observed damage, materials were characterized using three non-destructive testing techniques: ultrasonic pulse velocity (UPV) measurements to estimate the static elastic modulus of stones, Schmidt rebound hammer (SRH) tests to estimate the compressive strength of stones, and the mortar penetrometer (MP) tests to estimate the compressive strength of mortar. The measurements indicated poor mortar quality, which may have expedited failures. Using established correlations, various other important material parameters (e.g. mortar cohesion and homogenized masonry strength) are derived. It is envisioned that the damage observations and the material measurements in this article will inform detailed modeling efforts on the behavior of historic masonry buildings during the earthquakes. © The Author(s) 2024.Article Citation - WoS: 10Citation - Scopus: 14Out-Of Seismic Performance of Bed-Joint Reinforced Autoclaved Aerated Concrete (aac) Infill Walls Damaged Under Cyclic In-Plane Displacement Reversals(Elsevier, 2023) Halıcı, Ömer Faruk; Demir, Uğur; Zabbar, Yassin; İlki, AlperThe infill walls made of Autoclaved Aerated Concrete (AAC), which is a lightweight, fire resistant and energy efficient material, provide effective insulation solutions for building types of structures and becoming more and more popular in earthquake prone regions. Although the number of experimental tests examining the seismic response of clay brick infills is extensive, the amount of prior research on infill walls built of AAC blocks is rather limited. Past research revealed that the use of bed-joint reinforcement is one of the promising solutions to improve the global seismic response of masonry walls by enhancing strength and displacement capacity. In this study, the out-of-plane (OOP) seismic performance of AAC infill walls with flat-truss and innovative cord-type bed-joint reinforcement is experimentally evaluated. Also, consideration is given to the prior in-plane (IP) damage, which was found to degrade the seismic performance of infills in OOP direction. For this purpose, three IP and four OOP, in total, seven experimental tests were performed on four full-scale AAC infill wall specimens. The test parameters were selected in such a way as to make it possible to parametrically compare the OOP performance of AAC infills with flat-truss and cord-type bed-joint reinforcements with unreinforced AAC infill walls, together with the effect of prior IP damage on the OOP response of unreinforced AAC infill walls. It was found that the use of innovative cord-type bed-joint reinforcement improved the OOP strength to a similar extent to what was obtained from the truss-type reinforced specimen. In terms of ultimate displacement and energy dissipation capacity enhancement, the specimen with cord-type reinforcement performed better. In addition, the damages formed due to IP cyclic displacement reversals up to 0.005 drift ratio, which is defined as the drift limit for buildings with brittle infill walls in certain design codes, resulted in a significant reduction in the OOP strength and stiffness properties of AAC infills. The theoretical OOP strength calculations were found to provide unconservative strength values for the IP-damaged specimens.Article Citation - WoS: 8Citation - Scopus: 13Masonry Buildings Subjected To Settlements: Half-Scale Testing, Detailed Measurements, and Insights Into Behaviour(Elsevier, 2023) Dalgıç, Korhan Deniz; Gülen, Burcu; Liu, Yiyan; Açıkgöz, Sinan; Burd, Harvey; Maraşlı, Muhammed; İlki, AlperIndustry procedures to assess the risk of settlement-induced damage to masonry buildings ignore key aspects of the problem, such as the influences of building weight, façade openings, and floor structures. Experimental data are needed to characterise the influence of these aspects on damage. This paper describes tests on three brick masonry half-scale building models subjected to settlements. The use of scaling rules in choosing the model materials and kentledge, the settlement apparatus, and the cross-validation of displacement and strain measurements are presented. Comparative evaluation of building responses show that: (i) the distribution of building weight and the resulting in-situ stresses play a key role in determining compliance to settlements, (ii) openings make the structure vulnerable to cracking and (iii) floor slabs stiffen and strengthen the building and prevent the formation of damage in the upper floors, leading to a concentration of damage at the ground storey.