Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Now showing 1 - 3 of 3
Article Citation - WoS: 4Citation - Scopus: 5Effects of Tib2 Nanoparticle Content on the Microstructure and Mechanical Properties of Aluminum Matrix Nanocomposites(Walter de Gruyter GmbH, 2017) Kandemir, SinanThe present work reports the fabrication of A357 alloy matrix nanocomposites reinforced with 0.5, 1.0 and 2.0 wt.-% TiB2 nanoparticles (20-30 nm) by a novel method which is the combination of semi-solid mechanical mixing and ultrasonic dispersion of nanoparticles in liquid state. The microstructural and mechanical properties of the fabricated nanocomposites were investigated. The microstructural studies conducted with optical and advanced electron microscopes indicated that reasonably effective deagglomeration and uniform distribution of TiB2 nanoparticles into the matrix were achieved. Transmission electron microscopy studies also confirmed that the nanoparticles were embedded into the matrix and a good bonding was obtained between the matrix and the reinforcement. Increasing nanoparticle content led to grain refinement and significant enhancement in the mechanical properties of nanocomposites. The addition of 0.5, 1.0, and 2.0 wt.-% TiB2 nanoparticles increased the 0.2 % proof stress of matrix alloy by approximately 31, 48 and 61 %, respectively. The contribution of different mechanisms to the strength enhancement is discussed. It is proposed that the strengthening is mainly due to Orowan mechanism and dislocation generation effect by the coefficient of thermal expansion mismatch between the TiB2 nanoparticles and the matrix.Article Citation - WoS: 16Citation - Scopus: 17Porous Nanocomposites Prepared From Layered Clay and Pmma [poly(methyl Methacrylate)](Elsevier Ltd., 2007) Tanoğlu, Metin; Ergün, YeldaThe aim of the present work is the preparation of PMMA based porous nanocomposites that contain clay (montmorillonite, MMT) platelets as reinforcements within the cell walls of the porous structure. To render the clay layers organophilic, MMT was surface treated by an ion exchange reaction between interlayer cations of the clay and ammonium ions of a surfactant. Clay/PMMA based porous nanocomposites were prepared by polymerization of water-in-oil emulsions with and without clay addition. The microstructure and compressive mechanical behavior of the nanocomposites were investigated. The results of mechanical tests showed that the porous systems with the addition of 1 wt.% of organoclay (OMMT) exhibited a 90% and 50% increase of collapse stress and elastic modulus values, respectively, as compared to neat porous PMMA.Article Citation - WoS: 74Citation - Scopus: 77Full Bulk Spin Polarization and Intrinsic Tunnel Barriers at the Surface of Layered Manganites(Nature Publishing Group, 2005) Freeland, John W.; Gray, Kenneth E.; Özyüzer, Lütfi; Berghuis, Peter; Badica, E.; Kavich, Jerald J.; Zheng, Hong; Mitchell, John F.The affect of full bulk spin polarization and intrinsic tunnel barriers on the surface of layered manganites were studied using a combination of surface-sensitive x-ray and tunnelling process. The surface bilayer of air-cleaved layered manganites forms an antiferromagnetic insulating nanoskin composed of a single bilayer unit. It was shown that for the quasi-two-dimensional bilayer manganites the outermost Mn-O bilayer is affected while the next bilayer displays the full spin polarization of the bulk. The results show that the outermost bilayer act as an intrinsic barrier between the fully spin-polarized bilayer beneath and a subsequently deposited ferromagnetic counterelectrode.