Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
14 results
Search Results
Now showing 1 - 10 of 14
Conference Object Citation - Scopus: 2Nonlinear Model Identification of a Ball and Beam Mechanism Using Experimental Data(Institute of Electrical and Electronics Engineers Inc., 2023) Abedinifar, M.; Ertuğrul, S.; Argüz, S.H.A ball and beam mechanism is widely utilized in laboratory experiments to demonstrate the behavior of more complex systems. In this research, the phenomena such as nonlinear frictions, dead-zone and time-delay in the ball and beam mechanism's mathematical model is investigated. The following procedures are taken to construct a credible mathematical model of the system for this purpose. Firstly, the ball and beam mechanism's mathematical model, which includes different probable physically meaningful nonlinearities, is simulated using MATLAB\Simulink. Then, the Particle Swarm Optimization (PSO) algorithm is coded to determine the exact nonlinear model of a ball and beam system using the experimental data. Third, the accuracy of the results obtained from the PSO algorithm is tested using the hypothesis test and the confidence interval test. According to the statistical tests, the PSO algorithm is highly accurate in determining the parameters of the actual model of the system. © 2023 IEEE.Article Citation - WoS: 9Citation - Scopus: 11Robust Backstepping Control for a Four-Bar Linkage Mechanism Driven by a Dc Motor(Springer, 2019) Salah, Mohammad; Al-Jarrah, Ahmad; Banihani, Suleiman; Tatlıcıoğlu, EnverFour-bar linkage mechanisms have dragged the attention of many specialists due to its importance in the academic and industrial sectors. Hence, a lot of research work has been conducted to understand their complex behavior and explore various control techniques. In fact, such mechanisms possess highly nonlinear dynamics that require advanced nonlinear control methods. In addition, the four-bar linkage mechanism is exposed to significant dynamic fluctuations at high speeds due to the system inertias. In this paper, a backstepping control algorithm with a robust scheme is designed and applied on the four-bar linkage mechanism to investigate and explore its dynamical performance under various operating conditions and without a priori knowledge of the model parameters. Five operating conditions are introduced and tested in numerical simulations to show that the proposed nonlinear controller successfully regulates and tracks the speed of the driving link of the mechanism and shows a satisfactory performance.Article Citation - WoS: 12Citation - Scopus: 12Stability Analysis by a Nonlinear Upper Bound on the Derivative of Lyapunov Function(Elsevier Ltd., 2020) Şahan, GökhanIn this work, we give results for asymptotic stability of nonlinear time varying systems using Lyapunov-like Functions with indefinite derivative. We put a nonlinear upper bound for the derivation of the Lyapunov Function and relate the asymptotic stability conditions with the coefficients of the terms of this bound. We also present a useful expression for a commonly used integral and this connects the stability problem and Lyapunov Method with the convergency of a series generated by coefficients of upper bound. This generalizes many works in the literature. Numerical examples demonstrate the efficiency of the given approach. © 2020 European Control AssociationArticle Active Fault Tolerant Control of a Wind Farm System(IFAC Secretariat, 2018) Simani, Silvio; Turhan, CihanIn order to enhance the 'sustainability’ of offshore wind farms, thus skipping unplanned maintenance operations and costs, that can be important for offshore systems, the earlier management of faults represents the key point. Therefore, this work studies the development of an adaptive sustainable control scheme with application to a wind farm benchmark consisting of nine wind turbine systems. They are described via their nonlinear models, as well as the wind and wake effects among the wind turbines of the wind park. The fault tolerant control strategy uses the recursive estimation of the faults provided by nonlinear estimators designed via a nonlinear differential algebraic tool. This aspect of the study, together with the more straightforward solution based on a data-driven scheme, is the key issue when on-line applications are proposed for a viable implementation of the proposed solutions.Article Citation - Scopus: 1A New Robust Controller Formulation for the Full–state Feedback Position Tracking of a Small–scaled Unmanned Model Helicopter(IFAC Secretariat, 2017) Bıdıklı, Barış; Tatlıcıoğlu, Enver; Zergeroğlu, ErkanThis work focuses on the robust attitude tracking control problem for a small– scaled unmanned helicopter where the actual system inputs, namely the elevator servo input, the aileron servo input and the rudder servo input, are used in the controller formulation. The design process is divided into two parts. Initially the problem is transformed into a second order system with an uncertain non–symmetric input gain matrix by utilizing some reasonable simplifications for the rotor model under the hovering flight conditions. Then a novel robust control methodology is utilized via a matrix decomposition method. The stability of the overall system is ensured by Lyapunov type analysis where asymptotic position tracking is ensured. Numerical simulation results are presented to demonstrate the efficiency of the proposed method.Article Citation - WoS: 5Citation - Scopus: 5Steady-State Analysis of Nonlinearly Coupled Chua's Circuits With Periodic Input(World Scientific Publishing Co. Pte Ltd, 2003) Savacı, Ferit Acar; Yalçın, M. E.; Güzeliş, CüneytIn this paper, nonlinearly coupled identical Chua's circuits, when driven by sinusoidal signal have been analyzed in the time-domain by using the steady-state analysis techniques of piecewise-linear dynamic systems. With such techniques, it has become possible to obtain analytical expressions for the transfer functions in terms of the circuit parameters. The proposed system under consideration has also been studied by analog simulations of the overall system on a hardware realization using off-the-shelf components as well as by a time-domain analysis of the synchronization error.Conference Object Citation - WoS: 3Citation - Scopus: 3Inverse Optimal Adaptive Output Feedback Control of Euler-Lagrange Systems: a Variable Structure Observer Based Approach(Institute of Electrical and Electronics Engineers Inc., 2015) Aksoy, Orhan; Zergeroğlu, Erkan; Tatlıcıoğlu, EnverThis work focuses on inverse optimal, observer based output feedback control of Euler-Lagrange systems. Specifically a variable structure observer based output feedback controller is proposed which aside from ensuring asymptotic position tracking also ensures that a positive cost function, penalizing control input performance, is minimized. Simulation studies performed on a two link planar robot manipulator are included to illustrate the overall performance and feasibility of the proposed controller. © 2015 IEEE.Article Citation - WoS: 9Citation - Scopus: 13Nonlinear Robust Control of Tendon–driven Robot Manipulators(Springer Verlag, 2015) Okur, Beytullah; Aksoy, Orhan; Zergeroglu, Erkan; Tatlıcıoglu, EnverThis work addresses the position tracking control problem for tendon–driven robotic mechanisms in the presence of parametric uncertainty and additive external disturbances. Specifically, a full state feedback nonlinear robust controller is proposed to tackle the link position tracking problem for tendon–driven robot manipulators with uncertain dynamical system parameters. A robust backstepping approach has been utilized to achieve uniformly ultimately bounded tracking performance despite the lack of exact knowledge of the dynamical parameters and presence of additive but bounded disturbance terms. Stability of the overall system is proven via Lyapunov based arguments. Simulation studies performed on a two link planar robot manipulator driven by a six tendon mechanism are presented to illustrate the effectiveness and viability of the proposed approach.Conference Object Citation - WoS: 2Citation - Scopus: 1A Self-Tuning Velocity Observer Formulation for a Class of Nonlinear Systems(Institute of Electrical and Electronics Engineers Inc., 2016) Bıdıklı, Barış; Tatlıcıoğlu, Enver; Zergeroğlu, ErkanThis work presents the design and the corresponding stability analysis of a model free velocity observer formulation for nonlinear systems modeled by Euler-Lagrange formulation. The observation gains of the proposed formulation are tuned online according to an update algorithm removing the burden of observation gain tuning. Lyapunov based arguments are applied to prove the overall system stability. Performance of the observer proposed is illustrated via extensive simulation studies. Experimental studies are also utilized to demonstrate the viability of the proposed formulation.Conference Object Citation - WoS: 23Citation - Scopus: 23A self tuning RISE controller formulation(Institute of Electrical and Electronics Engineers Inc., 2014) Bıdıklı, Barış; Tatlıcıoğlu, Enver; Zergeroğlu, ErkanIn recent years, controller formulations using robust integral of sign of error (RISE) type feedback have been successfully applied to a variety of nonlinear dynamical systems. The drawback of these type of controllers however, are (i) the need of prior knowledge of the upper bounds of the system uncertainties and (ii) the absence of a proper gain tuning methodology. To tackle the aforementioned weaknesses, in our previous work [1] we have presented a RISE formulation with a time-varying compensation gain to cope for the need of upper bound of the uncertain system. In this study, we have extended our previous design to obtain a fully self tuning RISE feedback formulation. Lyapunov based arguments are applied to prove overall system stability and extensive numerical simulation studies are presented to illustrate the performance of the proposed method. © 2014 American Automatic Control Council.