Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Now showing 1 - 4 of 4
Article Enhanced Oxidation and Thermal Shock Resistance of N-Type Mg2Si0.89(Sn0.1,Sb0.01) Thermoelectric Material Via Cr0.9Si0.1 Coating(Wiley-VCH Verlag GmbH, 2025) Gurtaran, Mikdat; Zhang, Zhenxue; Li, Xiaoying; Dong, HanshanIn this study, Cr0.9Si0.1 coatings are deposited onto Mg2Si0.89(Sn0.1Sb0.01) thermoelectric (TE) materials using a closed-field unbalanced magnetron sputtering system. The cyclic oxidation behavior of uncoated and Cr0.9Si0.1-coated TE materials is thoroughly investigated at 500 degrees C for 10 and 50 cycles, with each cycle lasting 1 h. Surface morphology, phase constitution, cross-sectional layer structure, and elemental distribution are analyzed using scanning electron microscopy, X-ray diffraction, and energy-dispersive X-ray spectroscopy. Oxidation kinetics are assessed by measuring the mass gain of samples after cyclic oxidation testing. The uncoated TE material exhibits significant surface degradation after cyclic oxidation, initially forming MgO particles, followed by the development of SiO2 and Mg2SiO4 phases in later stages. Encouragingly, the Cr0.9Si0.1 coating demonstrates excellent thermal stability on the n-type Mg2Si0.89(Sn0.1Sb0.01) substrate. Although some oxygen diffusion occurs along grain boundaries within the coating, it is effectively trapped, thereby preventing further penetration into the underlying substrate. The high oxygen affinity of Cr and/or Si atoms plays a critical role in blocking oxidation, offering robust protection. These findings strongly support the use of Cr0.9Si0.1 coatings as an effective antioxidant barrier for TE materials under harsh operational conditions, ensuring the long-term operation of TE modules at elevated temperatures.Article Citation - WoS: 24Citation - Scopus: 26Role of Surface Oxidation on the Size Dependent Mechanical Properties of Nickel Nanowires: a Reaxff Molecular Dynamics Study(Royal Society of Chemistry, 2017) Aral, Gürcan; Islam, Md Mahbubul; Van Duin, Adri C. T.Highly reactive metallic nickel (Ni) is readily oxidized by oxygen (O2) molecules even at low temperatures. The presence of the naturally resulting pre-oxide shell layer on metallic Ni nano materials such as Ni nanowires (NW) is responsible for degrading the deformation mechanisms and related mechanical properties. However, the role of the pre-oxide shell layer on the metallic Ni NW coupled with the complicated mechanical deformation mechanism and related properties have not yet been fully and independently understood. For this reason, the ReaxFF reactive force field for Ni/O interactions was used to investigate the effect of surface oxide layers and the size-dependent mechanical properties of Ni NWs under precisely controlled tensile loading conditions. To directly quantify the size dependent surface oxidation effect on the tensile mechanical deformation behaviour and related properties for Ni NWs, first, ReaxFF-molecular dynamics (MD) simulations were carried out to study the oxidation kinetics on the free surface of Ni NWs in a molecular O2 environment as a function of various diameters (D = 5.0, 6.5, and 8.0 nm) of the NWs, but at the same length. Single crystalline, pure metallic Ni NWs were also studied as a reference. The results of the oxidation simulations indicate that a surface oxide shell layer with limiting thickness of ∼1.0 nm was formed on the free surface of the bare Ni NW, typically via dissociation of the O-O bonds and the subsequent formation of Ni-O bonds. Furthermore, we investigated the evolution of the size-dependent intrinsic mechanical elastic properties of the core-oxide shell (Ni/NixOy) NWs by comparing them with their un-oxidized counterparts under constant uniaxial tensile loading. We found that the oxide shell layer significantly decreases the mechanical properties of metallic Ni NW as well as facilitates the initiation of plastic deformation as a function of decreasing diameter. The disordered oxide shell layer on the Ni NW's surface remarkably reduces the yield stress and Young's modulus, due to the increased softening effects with the decreasing NW diameter, compared to un-oxidized counterparts. Moreover, the onset of plastic deformation occurs at a relatively low yielding strain and stress level for the smaller diameter of oxide-coated Ni NWs in comparison to their pure counterparts. Furthermore, for pure Ni NWs, Young's modulus, the yielding stress and strain slightly decrease with the decrease in the diameter size of Ni NWs.Article Citation - WoS: 48Citation - Scopus: 64Active Packaging of Ground Beef Patties by Edible Zein Films Incorporated With Partially Purified Lysozyme and Na 2edta(John Wiley and Sons Inc., 2011) Uysal Ünalan, İlke; Korel, Figen; Yemencioğlu, AhmetIn this study, antimicrobial activity of zein films incorporated with partially purified lysozyme and disodium ethylenediaminetetraacetic acid (Na 2EDTA) has been tested on selected pathogenic bacteria and refrigerated ground beef patties. The developed films containing 700μgcm -2 lysozyme and 300μgcm -2 Na 2EDTA showed antimicrobial activity on Listeria monocytogenes, Escherichia coli O157:H7, and Salmonella typhimurium. The application of lysozyme and Na 2EDTA incorporated zein films on beef patties significantly decreased total viable counts (TVC) and total coliform counts after 5days of storage compared to those of control patties (P<0.05). Zein films incorporated with lysozyme and Na 2EDTA or Na 2EDTA alone significantly slowed down the oxidative changes in patties during storage (P<0.05). Redness indices of patties coated with zein films were significantly lower than those of uncoated control patties during storage (P<0.05). This study demonstrated the potential usage of zein films containing lysozyme and Na 2EDTA for active packaging of refrigerated meat products. © 2011 The Authors. International Journal of Food Science and Technology.Article Citation - WoS: 11Citation - Scopus: 13Liquid-Phase Oxidation of Carvacrol Using Zeolite-Encapsulated Metal Complexes(American Chemical Society, 2006) Güneş, Alev; Bayraktar, Oğuz; Yılmaz, SelahattinWe report here the use of zeolite-encapsulated metal (salpn) complexes as catalysts in the oxidation reaction of the natural compound carvacrol in acetonitrile with hydrogen peroxide as the oxidant. No previous studies on the oxidation of carvacrol in the presence of metal salpn complexes have been reported. By using a general flexible ligand method, Cr(III), Fe(III), Bi(III), Ni(II), and Zn(II) complexes of N,N′-bis(salicylidene)propane1,3-diamine (H2salpn) encapsulated in NaY zeolite were prepared. All catalysts were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses to confirm the complex encapsulation. The activities of all prepared catalysts for the oxidation of carvacrol and hydrogen peroxide were tested. The performances of all catalysts were compared on the basis of the leaching test results and carvacrol conversions. Thymohydroquinone and benzoquinones were observed as byproducts at high conversions of carvacrol. No product was formed in the absence of a catalyst. Fe(salpn)-NaY catalyst exhibited the highest carvacrol conversion of 27.6% with a yield of 22.0%, followed by Cr(salpn)-NaY catalyst with 23.5% carvacrol conversion and a yield of 17.6%. Other catalysts have shown relatively lower performances in terms of carvacrol conversion and leaching. The Cr(salpn)-NaY catalyst was found to be a more efficient catalyst than others on the basis of leaching and activity tests. With the selected catalyst Cr (salpn)-NaY, the effects of temperature and carvacrol/hydrogen peroxide molar ratio on carvacrol oxidation reactions were investigated. Increasing the temperature from 40 to 60 °C caused an increase in the thymoquinone yield from 6.2% to 16.0%. An increase in carvacrol/hydrogen peroxide molar ratio from 1 to 3 resulted in a decrease in the thymoquinone yield.