Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
13 results
Search Results
Now showing 1 - 10 of 13
Article Citation - WoS: 1Citation - Scopus: 1Synthesis of Pristine Chitosan Foams with Enhanced Pore Structure, Surface Area, and Mechanical Strength for Tissue Engineering Applications(Iop Publishing Ltd, 2025) Polat, M.; Cropper, Chelsea; Ozdamar, A. B.; Polat, H.With its excellent biocompatibility, biodegradability, and antimicrobial activity, chitosan is a promising scaffold material for hard-tissue engineering. Yet, pristine chitosan foams typically lack the strength and porosity required for such use. Here we present a simple emulsion-templating approach to fabricate pristine chitosan foams with optimized strength and porosity. Sodium dodecyl sulfate (SDS), a widely used biocompatible anionic surfactant, was employed at trace levels to aid polymerization. The foams display a dual-scale pore morphology. Cavities of 150-300 mu m are separated by around 50 mu m thick chitosan walls containing large interconnecting openings. The walls are further populated with meso- and macropores of 50-500 nm. This architecture should support cell attachment and growth, facilitate proliferation, and enhance nutrient transport and metabolic exchange. The structure yields high surface area (up to 10 m2 g-1). Mechanically, the thick-walled cavities impart both elastic recovery and high compressive resistance (255 kPa at 40% strain from foams polymerized with 4% chitosan). A preliminary drug-release study using vancomycin confirmed excellent loading and sustained release.Article Performance of Sheet Pile Walls With Rubber-Modified Backfill(Springer, 2025) Ecemis, Nurhan; Kadekeshova, Kuralay; Khlaif, Ali HamidThis study investigates the behavior of clean sand and sand-rubber mixtures used as backfill materials behind sheet pile walls under vertical loads. Physical model experiments were conducted to assess lateral displacement and pressure for backfills containing 10% granulated rubber (2.5-5 mm) under both dry and saturated conditions, and across varying backfill inclination angles. To complement the experiments, discrete element method (DEM) simulations were performed to capture the micromechanical behavior of sand-rubber mixtures, enabling analysis of particle-scale interactions. Material stiffness and friction parameters were calibrated through direct shear tests to ensure computational efficiency and accurate representation. Comparative analyses were conducted between the DEM simulations and the physical sheet pile tests across various sand-rubber backfill configurations. The results suggest that sand-rubber mixtures offer a practical and sustainable alternative for backfill applications, improving both mechanical performance and pressure mitigation. Furthermore, force chain development and deformation patterns were thoroughly examined to understand the role of micro parameters; such as particle contact behavior, porosity, internal friction, and stiffness of the rubber-sand composite backfill in reducing active earth pressure against sheet pile walls.Article Silver-Loaded Titania-Based Metal-Organic Frameworks as a Platform for Silver Ion Release for Antibacterial Applications(American Chemical Society, 2025) Mazare, Anca; Goldmann, Wolfgang Heinrich; Kocak, Esra; Osuagwu, Benedict; Qin, Shanshan; Cao, Ran; Schmuki, PatrikConventional Ag-decorated TiO<inf>2</inf>coatings suffer from low adsorption capacity and burst release kinetics, limiting long-term antibacterial efficacy and risking cytotoxicity. An entirely different payload release approach can be based on metal–organic frameworks (MOFs), which offer tunable porosity, high surface area, and internal diffusion channels. Here, we report a thermally stabilized Ti-based MOF [NH<inf>2</inf>-MIL-125(Ti)] functionalized with Ag+via reactive deposition, enabling high Ag loading (∼14.7 wt %) and sustained release. Annealing at 250 °C enhances aqueous stability, allowing diffusion-governed Ag+delivery over >48 h, with 77% of the Ag still present in the MOF after a 24 h release. The system exhibits dose-dependent antibacterial activity in powders and comparable efficacy in coatings, with a more gradual release profile. This scalable platform is promising for long-acting coatings, wound interfaces, and implantable materials. © 2025 Elsevier B.V., All rights reserved.Article Citation - WoS: 20Citation - Scopus: 22Fabrication and Properties of Novel Porous Ceramic Membrane Supports From the (sig) Diatomite and Alumina Mixtures(Elsevier, 2022) Aouadja, Faycal; Bouzerara, Ferhat; Güvenç, Çetin Meriç; Demir, Mustafa M.In this paper, the manufacturing of macro-porous tubular ceramic supports for membranes is described. The novel supports are fabricated from natural diatomite and alumina raw materials using the extrusion method. The structure was analyzed by X-ray diffraction (XRD) and mercury porosimetry techniques; the presence of possible defects was investigated by scanning electron microscopy (SEM). The permeability has been measured from water flux in standard experiments. Experimental results show that the open porosity, the average pore size (APS), the pore size distribution, the strength, and the permeability of sintered supports, have been found to depend, mainly on the concentration of alumina (Al2O3) additive. Supports prepared with the addition of 10 wt.% of alumina and sintered at 1200 degrees C, can be considered as the most optimized; they have a porosity ratio of about 46%, an APS is around 7.7 mu m, a flexural strength value of about 28 MPa, and water permeability of around 15 m(3)h(-1) m(-2) bar(-1). Such materials could be of great interest in the supports fabrication for membrane application, for instance, water filtration. (C) 2021 SECV. Published by Elsevier Espana, S.L.U.Article Citation - WoS: 14Citation - Scopus: 17Biocompatibility of Silicon Nitride Produced Via Partial Sintering & Tape Casting(Elsevier Ltd., 2021) Çeçen, Berivan; Topateş, Gülsüm; Kara, Aylin; Akbulut, Serdar Onat; Havıtçıoğlu, Hasan; Kozacı, Leyla DidemThe biocompatibility of silicon nitride ceramics was proven by several studies however this study is apart from the literature in the manner of production routes that are tape casting and partial sintering. We report the tape casting route was chosen and a porous structure was obtained by partial sintering technique. Tape casting brought a smooth surface to the samples. Density and pore size distribution analysis showed that the scaffolds have low density because of the porous structure. XRD and SEM analyses were carried out to reveal the phase and microstructural characteristics of porous ceramic samples. Static contact angle measurement was done for the characterization of the wettability of the scaffolds. It revealed that the surface of the scaffolds was highly hydrophilic which is a desirable characteristic for the protein and cell adhesion. The mechanical characteristics of the scaffolds were analyzed by compression tests. Human osteosarcoma cells were used for in vitro studies. Cell-proliferation and cytotoxicity were analyzed by WST-1 and LDH, respectively. The osteoblastic behavior of the cells on the surface of the scaffolds was identified by alkaline phosphatase activity. BCA analysis was used for total protein content. The BCA and ALP results showed an increasing trend which is directly correlated with cell proliferation. Cells on the surface of the silicon nitride scaffolds were visualized by SEM and fluorescence microscopy where the images supported the in vitro analysis. Therefore, porous silicon nitride scaffolds fabricated via tape casting and partial sintering were biocompatible and they are possible candidates as bone substitute elements. © 2020 Elsevier Ltd and Techna Group S.r.l.Article Citation - WoS: 8Citation - Scopus: 8Pore Connectivity Effects on the Internal Surface Electric Charge of Mesoporous Silica(Springer, 2019) Şen, Tümcan; Barışık, MuratNano-scale confinements within mesoporous systems develop overlapping electric double layers (EDL) such that the existing theoretical models cannot predict the electric potential distributions and resulting surface charges. In addition, ionic conditions undergo local variation through connections between the pore voids and pore throats. For the first time in literature, we studied the charging behavior of mesoporous silica in terms of the pore to throat size ratio (R-pt) to characterize the pore connectivity effects, in addition to porosity (epsilon) and pore size (H). Both local and average surface charge densities inside mesoporous silica were examined by varying these parameters systematically. Results showed that the magnitude of surface charge density decreased with increasing EDL overlap and decreasing connectivity effects. We formulized this behavior and developed an extended model to predict mesoporous silica's internal charge as a function of porosity, pore size, and pore to throat size ratio.Article Citation - WoS: 3Citation - Scopus: 3Feasible Packing of Granular Materials in Discrete-Element Modelling of Cone-Penetration Testing(Taylor and Francis Ltd., 2018) Ecemiş, Nurhan; Bakunowicz, PaulinaThis paper explores how the discrete-element method (DEM) was found to play an increasingly important role in cone penetration test (CPT) where continuum-mechanics-based analysis tools are insufficient. We investigated several crucial features of CPT simulations in the two-dimensional DEM. First, the microparameters (stiffness and friction) of discrete material tailored to mimic clean, saturated sand, which is used in cone-penetration tests, were calibrated by curve-fitting drained triaxial tests. Then, three series of cone-penetration simulations were conducted to explore (1) top boundary conditions, (2) reasonable size of discrete particles at different initial porosities, and (3) limit initial porosity of the model for a balance between accurate representation and computational efficiency. Further, we compared the cone-penetration resistance obtained in the laboratory and numerical simulations for the range of relative densities.Article Citation - WoS: 61Citation - Scopus: 74Production of Anorthite Refractory Insulating Firebrick From Mixtures of Clay and Recycled Paper Waste With Sawdust Addition(Elsevier Ltd., 2012) Sütçü, Mücahit; Akkurt, Sedat; Bayram, Alican; Uluca, UluçProduction of porous anorthite refractory insulating firebricks from mixtures of two different clays (K244 clay and fireclay), recycled paper processing waste and sawdust addition are investigated. Suitability of alkali-containing-clay, low-alkali fireclay, pore-making paper waste and sawdust in the products was evaluated. Prepared slurry mixtures were shaped, dried and fired. Highly porous anorthite ceramics from the mixtures with up to 30% sawdust addition were successfully produced. Physical properties such as bulk density, apparent porosity, percent linear change were investigated as well as the mechanical strengths and thermal conductivity values of the samples. Thermal conductivities of the samples produced from fireclay and recycled paper waste decreased from 0.25 W/mK (1.12 g/cm 3) to 0.13 W/mK (0.64 g/cm 3) with decreasing density. Samples were stable at high temperatures up to 1100 °C, and their cold strength was sufficiently high. The porous anorthite ceramics produced in this study can be used for insulation in high temperature applications. © 2011 Elsevier Ltd and Techna Group S.r.l. All rights reserved.Article Citation - WoS: 81Citation - Scopus: 97Utilization of Recycled Paper Processing Residues and Clay of Different Sources for the Production of Porous Anorthite Ceramics(Elsevier Ltd., 2010) Sütçü, Mücahit; Akkurt, SedatProduction of porous anorthite ceramics from mixtures of paper processing residues and three different clays are investigated. Suitability of three different clays such as enriched clay, commercial clay and fireclay for manufacturing of anorthite based lightweight refractory bricks was studied. Porous character to the ceramic was provided by addition of paper processing residues (PPR). Samples with 30-40wt% PPR fired at 1200-1400°C contained anorthite (CaO·Al2O3·2SiO2) as major phase and some minor secondary phases such as mullite (3Al2O3·2SiO2) or gehlenite (2CaO·Al2O3·SiO2), depending on the calcite to clay ratio. Anorthite formation for all clay types was quite successful in samples with 30-40wt% of paper residues fired at 1300°C. A higher firing temperature of 1400°C was needed for the fireclay added samples to produce a well sintered product with large pores. Gehlenite phase occurred mostly at lower temperatures and in samples containing higher amount of calcium (50wt% PPR). Compressive strength of compacted and fired pellets consisting of mainly anorthite ranged from 8 to 43MPa. © 2010 Elsevier Ltd.Article Citation - WoS: 300Citation - Scopus: 343The Use of Recycled Paper Processing Residues in Making Porous Brick With Reduced Thermal Conductivity(Elsevier Ltd., 2009) Sütçü, Mücahit; Akkurt, SedatProduction of porous and light-weight bricks with reduced thermal conductivity and acceptable compressive strength is accomplished. Paper processing residues were used as an additive to an earthenware brick to produce the pores. SEM-EDS, XRD, XRF and TG-DTA analysis of the paper waste and brick raw material were performed. Mixtures containing brick raw materials and the paper waste were prepared at different proportions (up to 30 wt%). The granulated powder mixtures were compressed in a hydraulic press, and the green bodies were dried before firing at 1100 °C. Dilatometric behaviours, drying and firing shrinkages were investigated as well as the loss on ignition, bulk density, apparent porosity, water absorption and thermal conductivity values of the fired samples. Their mechanical and microstructural properties were also investigated. The results obtained showed that the use of paper processing residues decreased the fired density of the bricks down to 1.28 g/cm3. Compressive strengths of the brick samples produced in this study were higher than that required by the standards. Thermal conductivity of the porous brick produced in this study (<0.4 W/m K) showed more than 50% reduction compared to local brick of the same composition (0.8 W/m K). Conversion of this product to a perforated brick may reduce its thermal conductivity to very low values. Successful preliminary tests were conducted on an industrial scale.