Master Degree / Yüksek Lisans Tezleri
Permanent URI for this collectionhttps://hdl.handle.net/11147/3008
Browse
2 results
Search Results
Master Thesis Hydrothermal Treatment of Biomass in Hot-Pressurized Water(Izmir Institute of Technology, 2015) Dadenov, Saken; Emrullahoğlu, Mustafa; Yüksel Özşen, Aslı; Yüksel Özşen, Aslı; Emrullahoğlu, Mustafa; 03.02. Department of Chemical Engineering; 04.04. Department of Photonics; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyThe aim of this study is to observe conversion of cellulose, which is the main compound of biomass, into its building-block chemicals in hot-pressured water as reaction medium with no addition of organic solvents. Water in liquid state under temperature and pressure above boiling point and below the critical point (374. 15 ºC and 22.1 MPa) is called as hot-pressurized water (or sub-critical water). Nowadays the biomass has great attention across the World as renewable source of energy, at the background of the quickly growing energy demand, since it is widely available and cheap. This technology is totally environmentally friendly and uses water as a reaction medium. As well known, since plant biomass contains up to 50% cellulose, it was decided to use it as a model compound in this study. Decomposition of cellulose leads to formation of various compounds. Among them levulinic acid is the most attractive chemical. Moreover, this acid marked as “Top 12 Building Blocks” of most perspective chemicals and obtaining from biomass by hydrothermal treatment is not widely studied. During this study, different reaction parameters such as temperature, pressure, reaction time and external oxidizer addition were studied to clarify their effects on cellulose decomposition and product yields to achieve the highest selectivity of the desired product. Addition of H2SO4 led to increase cellulose conversion up to 73% at 200 oC with a H2SO4 concentration of 125 mM at 60 min reaction time. Under same conditions, the yield of levulinic acid was successfully achieved to 38% after 60 min.Master Thesis Hydrothermal Preparation of Single Crystalline Ceo2 Nanoparticles and the Influence of Alkali Hydroxides on Their Structure and Optical Behavior(Izmir Institute of Technology, 2009) Kepenekci, Özlem; Emirdağ Eanes, Mehtap; Eanes, Mehtap; Eanes, Mehtap; 04.01. Department of Chemistry; 04. Faculty of Science; 01. Izmir Institute of TechnologySingle crystalline cerium oxide nanoparticles were synthesized via hydrothermal method by mixing aqueous solution of cerium nitrate [Ce(NO3)3.6H2O] with an alkali base. Several characterization methods were used to identify morphology and crystalline nature such as X-ray Diffraction, Scanning and Transmission Electron Microscopes. This study is divided into three parts. In the first part, some controlling parameters like, that were affecting size and shape of CeO2 nanoparticles, were studied. It was found that size of CeO2 nanoparticles increased when increasing both reaction time and temperature. Alkali base concentration promoted the particle growth. Also, particle morphology was more uniform rather than aggregated in presence of higher concentrated alkali base. When the alkali base type was changed, the use of NaOH produced larger cubic nanocrystals of CeO2 than KOH and LiOH.Second part is related to determine the optical properties of CeO2 nanoparticles. Based on the UV-Vis and Fluorescence Spectroscopy results, size, bandgap and defect level of CeO2 nanoparticles can be easily determined. Nanoparticles in presence of NaOH alkali base were found to produce less defective CeO2 nanoparticles as compared to KOH and LiOH. The last part of this work is to evaluate the shape effect on morphology, size and optical properties of CeO2 nanoparticles. Rod crystals of CeO2 were produced when the hydrothermal synthesis temperature was low (120°C) or when the reaction time was short (1 hour). When the synthesis temperature was higher than 160°C well defined cubic crystals of CeO2 started to form.