Master Degree / Yüksek Lisans Tezleri
Permanent URI for this collectionhttps://hdl.handle.net/11147/3008
Browse
3 results
Search Results
Master Thesis Preparation and Application of Subnano Ceramic Filtration Membranes for Organic Species Removal From Aqueous Streams(Izmir Institute of Technology, 2017) Yaltrık, Kaan; Çiftçioğlu, Muhsin; Çiftçioğlu, MuhsinThe purpose of this MSc work was to investigate the effects of neodymium/zirconium doping on the phase structure evolution of the selective titania nanofiltration (NF) membrane layers for the rejection of subnano sized organic compounds. A dilatometric study was carried out on unsupported membranes prepared from polymeric sols with different neodymium and zirconium levels. The development of functional abilities towards the design of the pore structure in the subnano range by controlling the nanostructural evolution of the selective NF layers was the fundamental purpose of this work. The neodymium doping level was varied in the 0.3-5.0% range and the zirconium mixing level was varied in the 0-100% range based on stable metal oxide molar compositions. Dilatometric characterization results have shown that dopant level effects the nanophase evolution and the densification behavior considerably. The dynamic light scattering results have shown that the polymeric species in the sol were predominantly 2-4 nm in size and had a very narrow size distribution. XRD analysis results indicated titania anatase crystallite sizes were reduced significantly with neodymium doping or zirconia mixing and the phase transformations were retarded by about 200°C. HR-TEM images of selected zirconia mixed or neodymium doped unsupported membrane powders also added new information to the XRD/dilatometry derived nanophase evolution results. The determination of the molecular weight cut-off values and pure water fluxes of the NF membranes which would be prepared by using these polymeric sols in the near future may generate valuable knowledge on the subnano separation abilities of these NF membranes.Master Thesis Application of Tubular Ceramic Nanofiltration Membranes for Textile Waste Water Desalination(Izmir Institute of Technology, 2017) Yaldız, Safiye; Çiftçioğlu, MuhsinTextile industry generates coloured wastewater containing a significant level of dye/inorganic salts. Environmental concerns and efficient energy use make the recovery of reusable water and salts from textile wastewater vital globally. Ceramic nanofiltration (NF) membranes are becoming increasingly important for the recovery and purification of dyes and salts (e.g., NaCl) in high salinity waste streams. They have superior chemical/mechanical/thermal properties compared to their polymeric counterparts. Desalination performances of the ceramic NF membranes depend on the concentration and chemical structure of the target ions, pH of feed and the wastewater stream along with the chemical/surface/nanostructural properties of the selective NF layer. Metal oxides are generally used as NF layer materials due to their amphoteric behaviour. Repulsive/attractive forces between the ionic species in the solution and the NF layer may make the separation of ionic species possible. In this work, zirconia doped titania based NF layers were designed. Desalination experiments were conducted with 10-3 M Na2SO4 and MgSO4 salts at different pH values. Salt retention capacities of 5 different membranes were determined. Percent retention was calculated using ion concentrations in permeate and retentate streams. The Mg2+ and SO4 -2 ion concentrations were determined by titration with 0.01 M EDTA and by spectrophotometer at 420 nm, respectively. A clear pH dependency of the salt retention was found in filtration tests. The highest SO4 -2 and Mg+2 ion retentions were obtained with using MF+disperel (boehmite)+P2 (600 0C)+TTIP hydrosol+Ti/Zr polymeric (double layer) membrane as 95% and 91%, respectively.Master Thesis Preparation and Characterzation of Ceramic Micro/Ultra Membranes for Separation Processes and Wastewater Treatment(Izmir Institute of Technology, 2016) Kırkbaş, Öncel; Çiftçioğlu, MuhsinThe availability of fresh water is vital for life, sustainable growth and healthy ecosystems on earth. Increasing world population, a changing climate, intensive agricultural practices, economic growth and urbanization will undoubtedly continue to make the issue of water scarcity a global priority for years to come. The gap between the need and the supply of water globally is increasing steadily which necessitates significant measures to be taken towards conservation, and reuse of industrially, domestically and agriculturally used water. Textile industry is one of the leading industries in the use of fresh water and the generation of wastewaters. Technologies currently in use towards industrial and domestic water treatment like sedimentation, chemical coagulation, biological treatment etc. cannot produce reusable water but also generate significant amounts of solid waste. Membranes are now widely accepted to have the potential of supplying cost-effective solutions for water treatment and a growing range of purification and separation problems. The number and the pore structure design of the multiple selective layers on the inner surfaces of tubular α-alumina supports vary with the nature of the intended separation application. Although the nature of MF membranes is relatively well developed, current research is concentrated on the design of nanoporous phase structure in NF and UF selective layers. Selective micro/ultra/nanofiltration layers were formed on extruded tubular alumina supports by colloidal/sol-gel techniques. The performance of these selective layers were investigated by the experiments performed with textile wastewater. Permeates from ceramic tubular membranes were characterized by spectrophotometer. The suspended solids and color (Pt-Co) were reduced by 90% and 80%. respectively.