Master Degree / Yüksek Lisans Tezleri

Permanent URI for this collectionhttps://hdl.handle.net/11147/3008

Browse

Filters

2020 - 20243

Settings

Author: search.filters.author.Özdemir, İzzetPublisher: search.filters.publisher.01. Izmir Institute of Technology

Search Results

Now showing 1 - 3 of 3
  • Master Thesis
    Alternative Modelling Approaches for Frp Confined Concrete Columns
    (01. Izmir Institute of Technology, 2024) Özdemir, İzzet; Dalgıç, Korhan Deniz; Özdemir, İzzet; Dalgıç, Korhan Deniz; 03.03. Department of Civil Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    Fiber takviyeli polimer (FRP) ile dıştan sargılama, mevcut yapıların güçlendirilmesi ve yenilenmesi için etkili ve hızlı bir yöntem olarak yaygın şekilde kullanılmaktadır. Bu malzemeler, tek tip veya hibrit FRP ceketler şeklinde uygulanabilir ve yapının taşıma kapasitesini artırmanın yanı sıra uygulama sürecini kolaylaştırmaktadır. Ancak, FRP sargılı sistemlerin sunduğu taşıma kapasitesi ve süneklik artışlarının yeterince öngörülememesi, bu yöntemlerin daha iyi anlaşılmasını ve tasarım ilkelerinin geliştirilmesini gerekli kılmaktadır. Bu tezde, FRP sargılı betonun davranışını modellemek için sonlu elemanlar analizi ve analitik modelleme olmak üzere iki farklı yaklaşım incelenmiştir. Sonlu elemanlar analizinde, Beton Hasar Plastisite modeli ve Drucker-Prager Plastisite modeli kullanılmıştır. Ancak, FRP'nin sağladığı sargılama basıncı, çelik sargılama basıncından farklı bir mekanizmaya sahip olduğu için bahsedilen plastisite modelleri doğrudan uygulanması mümkün olmamaktadır. Bu nedenle, hem tek tip hem de hibrit FRP sargılı kolonlar için modellerin doğruluğunu artırmaya yönelik iyileştirmeler yapılmıştır. Ayrıca, literatürde FRP sargılı betonun davranışını açıklayan birçok analitik model yer almakla birlikte, hibrit sistemlerin davranışını öngörmeye yönelik çalışmalar sınırlıdır. Bu kapsamda, mevcut analitik modeller değerlendirilmiş ve hem tek tip hem de hibrit LP sistemlerde yaygın olarak bilinen modellerin uygulanabilirliği araştırılmıştır. Elde edilen sonuçlar, deneysel verilerle karşılaştırılarak değerlendirilmiştir.
  • Master Thesis
    Topology Optimization of Non-Linear Elastic Microstructures
    (01. Izmir Institute of Technology, 2023) Özdemir, İzzet; Özdemir, İzzet; 03.03. Department of Civil Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    Topology optimization (TO) is used in a broad spectrum of engineering disciplines ranging from aerospace to civil engineering. A particular sub-field where topology optimization has been very instrumental is the design of microstructures that yield specific macroscopic properties, such as negative Poisson's ratio and negative magnetic permeability. In this thesis, based on a recently proposed method for nonlinear homogenization, a framework for topology optimization of nonlinear elastic microstructures is developed and implemented as a computer program using the Julia programming language. Following a plane strain formulation, a two-dimensional unit cell with periodic boundary conditions is used in combination with a neo-Hookean elastic material response. By exploiting the symmetry properties of the resulting orthotropic microstructure, it is shown that the computational domain can be reduced, and half of the original discretization is sufficient to carry out the optimization task. The obtained topologies from the developed computer program, the linear and nonlinear response comparison, and the computational gain achieved through domain reduction are presented along with the experiments on proof-of-concept type uni-axial tests.
  • Master Thesis
    Seismic Analysis of an Ancient Lighthouse by Meso-Scale Modeling Technique
    (01. Izmir Institute of Technology, 2020) Gözün, Safiyullah Üveys; Dönmez, Cemalettin; Özdemir, İzzet; Özdemir, İzzet; Dönmez, Cemalettin; 03.03. Department of Civil Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    Modeling masonry structures has always been a difficult subject due to the lack of information about the behavior, the heterogeneity of the masonry materials and complex geometries of masonry structures. In terms of the computational costs and complexity, several methods are proposed in the literature. In this thesis, the capabilities of the meso-scale modeling technique are investigated by means of two experiments selected from the literature and the seismic response of an ancient lighthouse. Brick and mortar type structure is idealized as expanded units surrounded by zero thickness cohesive interfaces representing the mortar behavior. This means that the failure of mortar layers is considered explicitly by means of cohesive surfaces whereas the mechanical response of expanded units is described by Drucker-Prager/Cap model. This approach is used to simulate the in-plane and the outof-plane behavior of masonry walls reported in the literature. After validating the models with the experimental results, implicit-dynamic time history analyses of an ancient lighthouse are conducted by using 2 different earthquake records. The influence of mortar properties on the energy dissipation mechanisms and collapse pattern of the structure are investigated by means of a parametric study. As an attempt to identify the critical earthquake level corresponding to the initiation of sliding within the lighthouse, a set of additional analyses are conducted with scaled earthquake records.