Master Degree / Yüksek Lisans Tezleri
Permanent URI for this collectionhttps://hdl.handle.net/11147/3008
Browse
13 results
Search Results
Master Thesis Piezocatalytic and Piezoelectric Properties of P(vdf) and Its Copolymer/Terpolymer Films(01. Izmir Institute of Technology, 2023) Tengizdeniz, Ceren; Adem, Umut; Genç, AzizNowadays, the release of colored organic pollutants such as Rhodamin B dye, resulting from industrial activities endanger the people, animals, and plants. Many methods have developed to destroy these harmful pollutants. Piezocatalysis, a newly used environmentally friendly method, takes advantage of the piezoelectric effect, and uses mechanical vibration to produce active species on opposite surfaces of matter for degradation of dye. In this study, piezocatalytic and piezoelectric properties of P(VDF) based homopolymer, copolymer and terpolymers were investigated. With the addition of 2nd and 3rd monomer to the homopolymer, observation of change in piezoelectric and piezocatalytic properties and removal efficiency of pollution in water, were aimed. P(VDF) homopolymer, P(VDF-TrFE) copolymers with composition of 55/45 and 50/50 mol%, and P(VDF-TrFE-CTFE) terpolymer with 62/31/7 mol% were synthesized by solution casting method. It was observed that the 2nd and 3rd monomer added to the homopolymer enhanced the piezoelectric properties and strain characteristics of the polymers. Maximum polarization and strain of terpolymer was observed as 11 µC/cm2 and 5.6 %, respectively. Due to the increase in piezoelectricity, a noticeable increase in piezocatalytic properties was observed. Terpolymer exhibited the highest and most efficient piezoelectric and piezocatalytic performance. P(VDF) homopolymer was reached 27% dye degradation efficiency. While copolymers with mol% 55/45 and 50/50, dye degradation efficiencies were 40% and 47%, respectively, terpolymer efficiency was 54%. From the dielectric measurements, within the transition region (49 mol% ≤ CVDF ≤ 55 mol%) of P(VDF-TrFE), both normal-ferroelectric and relaxor characteristics were observed. Terpolymer showed relaxor properties as expected.Master Thesis Comparison of Powder Synthesis Methods for the Production of Potassium Sodium Niobate (knn)(Izmir Institute of Technology, 2021) Pişkin, Cerem; Ahmetoğlu, Çekdar Vakıf; Adem, UmutAlkali niobate-based, i.e., potassium sodium niobate, KxNax-1NbO3 at x=0.5 (the composition at the morphotropic phase boundary (MPB)), based materials have been reported as promising lead-free piezoelectrics to be substituted with the most extensive lead-based, i.e., lead zirconate titanate (PZT) ones. In this thesis, KNN particles were obtained using three discrete powder synthesis routes: conventional solid-state reaction, hydrothermal synthesis, and sol-gel processing. The as-synthesized powders were characterized via several techniques to provide a comparative study and underline the difficulties upon KNN synthesis. In the conventional method, the phase pure K0.5Na0.5NbO3 powders were obtained at 850°C with 382 ∓ 68 nm particle size. Unfortunately, the process cannot be considered sustainable due to the high risk of non-perovskite impurity phase formations. Also, the results demonstrated that single phase KNN powder having the MPB composition could not be accomplished via a one-step hydrothermal reaction process because of the inevitable formation of the second NaNbO3 phase. Instead, post-heat treatment of biphasic (K-rich (x>0.5) KNN and NaNbO3) samples lead to induction of sodium incorporation into the crystal lattice, and eventually, phase-pure KNN particles with high proximity (x=0.58) to MPB were achieved. The KNN powder with the smallest particle size (145 nm) was obtained using the sol-gel method at 500°C. However, the samples showed carbonate impurities resulting from the reaction of unreacted alkali cations (K+ and/or Na+) with the ambient CO2. Hence, the KNN samples needed to be stored under inert atmosphere to ensure purity.Master Thesis Formation of Srtio3[tio2] Ceramic Composites at Low Temperatures(01. Izmir Institute of Technology, 2021) Karataş, Esin; Adem, Umut; Ahmetoğlu, Çekdar VakıfStrontium titanate ceramics are materials belonging to the perovskite material group with the formula ABO3. Strontium titanate ceramics have been a preferred material in many areas, such as the electroceramics industry, due to its high dielectric constant and high chemical stability and generally produced by manufacturing processes such as solid-state synthesis, hydrothermal method, and sol-gel. SrTiO3 ceramics have been produced in the literature with different temperatures, times, and starting materials. For ceramic products, a sintering step is required after the powder production step. Traditional sintering methods, which have been used for many years, are used to densify powders with high temperatures. Recently developed low-temperature densification methods enable the sintering process to be carried out at relatively lower temperatures. For this purpose, in this thesis, SrTiO3-TiO2 ceramic composites were produced at different reaction temperatures and times using the rHLPD method, which combines powder production and sintering steps in a single process. In the studies, the reaction temperature, time, and the effect of adding mineralizer to the prepared solution for the hydrothermal reaction on the final product were investigated. The aim of the thesis is to produce SrTiO3 from TiO2 green body using the rHLPD method. In addition, the production of SrTiO3-TiO2 ceramic composites with as high mole conversion and relative density values as possible was targeted with different parameters such as reaction temperature, reaction time, and addition of NaOH to the solution. As a result of the studies carried out with different parameters, SrTiO3-TiO2 ceramic composites with a final relative density value of approximately 81 % were produced. Consequently, in the XRD and Rietveld analysis, it was seen that the main phase was SrTiO3. In addition, there was a TiO2 phase in the structure. Finally, the SrCO3 phase was not detected in the structure.Master Thesis Experimental Analysis of Inkjet Printed Multi Metal Oxide Photoelectrodes for Water Splitting Applications(Izmir Institute of Technology, 2020) Tekneci, Gülsüm Efsun; Karabudak, Engin; Adem, UmutRecently, scientific research studies focus on renewable energy solutions as well as energy efficiency in managing the upcoming climate crisis which manifests itself in the form of global warming. However, the chaotic nature of renewable energy sources caused energy storage technologies to gain importance. In addition to battery technologies consisting of lithium and post-lithium ion, zinc-air, nickel-zinc and lead-acid; artificial photosynthesis products such as hydrogen and methanol also show superiority in transportation. Especially hydrogen fuel is in the leading position with gravimetric energy density of approximately 140 MJ/kg. In this study, the experimental procedure is conducted and analyzed to produce cost-effective multi-metal oxide catalysts at high speed and efficiency with a combinatorial approach using inkjet printing technology to obtain hydrogen by splitting water. Considering the abundancies in nature, especially nickel, cobalt, iron, manganese, copper and chromium salts were preferred to obtain oxide derivatives. Inkjet printing experiments were conducted with the printer provided by Sağlık İzleme Sistemleri A.Ş.. The precision of the printed layers was examined and compared with the literature values. In cases involving differences from the literature value, possible causes are emphasized and solutions are suggested. Problems in transition from single metal oxide printed layers to more complicated multi-metal oxide prints have been examined and solutions have been proposed. As a result, this experimental study is aimed to provide foresight for large-scale (photo)electrocatalyst production with the utilization of inkjet printing.Master Thesis Ferroelectric Ceramic Polymer Nanocomposites for Electrocaloric Cooling Applications(Izmir Institute of Technology, 2020) Tokkan, Melike; Adem, UmutIn this study, nanocomposites consisting of the polymer matrix and nanometer sized ceramic supporting phase were produced for electrocaloric cooling applications, which show potential as alternative refrigerant system. The aim of this study was to be able to estimate adiabatic temperature change (?T) of the composites by measuring saturated hysteresis loops for the composite materials that allow accurate calculation of the ?T using the indirect method based on Maxwell's relations. Ba0.94Ca0.06Ti0.925Sn0.075O3(BCST) composition ceramic was used as the supporting phase of the composite and P(VDF-TrFE)(55-45) co-polymer was chosen as the matrix. The ceramics were synthesized, as pellets by conventional solid-state method. Ferroelectric nanocomposites were manufactured by solution casting method by adding 5, 7.5, 10 volume percent of the ceramic powder, which was obtained by grinding the pellets by using ball milling. Phase analysis of all materials done using X-ray Diffraction method. Fourier Transform Infrared Spectroscopy was used to clearly understand the phase structure of polymer. Scanning electron microscopy was used for understand the distribution of ceramic particles in polymer matrix. Dielectric constant-dielectric loss and ferroelectric hysteresis loops were measured as a function of temperature for the electrical characterization of the materials. Adiabatic temperature change under electric field (?T) of the materials were calculated based on Maxwell's equations indirectly using the temperature dependent electrical polarization data. The dielectric constant and electrical polarization of the polymer matrix have increased with the addition of ceramic particles. The hysteresis loops of thebn pure polymer and composites were saturated, therefore the temperature change can be calculated accurately with the indirect method. Maximum ?T was calculated on the composite having 10vol% ceramic particles. (6.964K at 900 kV/cm).Master Thesis Manufacturing of Fire Resistant Porous Ca-Silicate Ceramics(Izmir Institute of Technology, 2019) Oğur, Ezgi; Ahmetoğlu, Çekdar Vakıf; Adem, UmutCalcium silicate hydrates are a group of materials belonging to the calcium silicate family. Calcium silicate hydrates are crucial materials in the building industry, especially for thermal insulation and fire-resistant applications. Tobermorite and xonotlite, calcium silicate hydrates, are the most popular materials in the literature due to their structural properties. These material are synthesized by hydrothermal processes. In some publications, several pre-treatments are applied to the starting materials before hydrothermal synthesis. In this thesis, the effects of these processes on different starting materials and how does changing the parameters affect the process are examined. Besides, the main objective of the thesis is to produce the xonotlite phase using recycling materials as economically as possible. Calcium silicate hydrates powders containing approximately 61 wt. % xonotlite was produced with using lime and recycled glass by hydrothermal synthesis method. The obtained product has a mainly fibrous morphology due to the main phase is xonotlite. According to phase analysis, tobermorite, scawtite, and the trace of calcite phases are also present in the general structure. The thermogravimetric analysis demonstrated that approximately 20% loss is observed up to 800˚C (at about that temperature transformation of the xonotlite to the wollastonite phase is occur.). The mass change remained constant between 800˚C and 1200˚C. Calcium silicate powder (obtained by thermal treatments from CSH) was also thermally analyzed and consequently remained stable up to 1200˚C, (the loss was approximately <1%).Master Thesis Obtaining and Characterization of Artificial Leather Using Different Types of Plasticizers(Izmir Institute of Technology, 2019) Akkuş Altındağ, İffet; Akdoğan, Yaşar; Adem, UmutArtificial leather is the material which has wide range of use in life from fashion garment, upholstery to technical applications such as defense industries. PVC artificial leather is preferred material by manufacturers because of its low cost and modification can be done easily by using true plasticizers which are fitting for purpose. In this study, number of six different plasticizers which are non-phthalate plasticizers; trioctyl trimelliate (TOTM), tributyl trimelliate (TBTM), dioctyl terephthalate (DOTP), tributyl citrate (TBC), dioctyl adipate (DOA) and dioctyl succinate (Plast BIO) were used for obtaining artificial leather. To characterize the properties of different kinds of plasticizer in artificial leather, mechanical tests including tensile and tear strengths, elongation at break, cold flexibility and effects of migrability tests were applied. Materials were formulated at three degrees of plasticizers ratios. Also, chemical changes during plasticization were observed using FTIR spectroscopy with ATR accessory, according to types and used levels of plasticizers. In conclusion, plasticizers showed different properties, i.e. material with TOTM plasticized had maximum tear and tensile strengths, while DOA and TBC including materials showed maximum elongation under same load. Considering cold flexibility of six plasticizers, DOA, BIO and TBC have more resistance to cold were obtained, respectively. In addition, migration studies showed that plasticizers including TOTM and TBTM have the least migration properties.Master Thesis Production and Characterization of Porous Ceramics for Aircraft Arresting Systems(Izmir Institute of Technology, 2019) Çapraz, Furkan; Ahmetoğlu, Çekdar Vakıf; Adem, UmutDespite developments in aviation, accidents still occur and lead to loss of lives. Technical or environmental factors may cause overrun accidents. In the case of aircraft that fail to stop along the runway distance during take-off or landing, such accidents are called overrun. Aircraft stopping systems (AAS) are passive safety systems used to prevent to take damage of passengers and aircraft during overrun. In the literature, foamed concrete was generally used as the AAS material. However, some studies have also been carried out on other materials that may be used as the AAS material. In present thesis, the aim was to produce porous calcium silicates instead of foamed concrete in AAS. The slip casting method was used to produce porous calcium silicate monoliths. The main components used in the manufacturing of porous wollastonite were xonotlite (as a matrix material), polymethyl methacrylate (as a sacrificial pore former, PMMA), polyvinyl alcohol (as a binder, PVA), Dolapix CE 64 (as a dispersing agent) and distilled water. Three different xonotlite ratios (8, 9 and 10% by volume) have been studied with four different xonotlite/ PMMA ratios (1, 0.82, 0.54 and 0.33 by volume). Also, specimens without PMMA were produced for each xonotlite ratio. The suspensions were stirred for 3 h at 750 rpm and then casted into the gypsum mold. The samples which were dried at room temperature (RT) were heat treated at 1000 oC. After production step microstructural, structural and mechanical analysis o the porous calcium silicates were carried out. Cold Crushing Strength (CCS) tests were performed out for determining mechanical properties. CCS values of the porous monolith parts ranged between 1376 kPa and 53.2 kPa depending on xonotlite/ PMMA ratios. In addition, the porosity values ranged from 93.38 to 87.82%. The resuts showed that some of these porous calcium silicate monoliths are suitable to use instead of foamed concrete as the AAS material.Master Thesis Determination of the Electrocalorinc Properties of the Ferroelectric (1-x)batio3-bi(li1/3ti2 (0?x?0.2) System(Izmir Institute of Technology, 2018) Demirtay, Tuğçe; Adem, Umut; Çiftçioğlu, MuhsinThe aim of this study is to develop electrocaloric (EC) materials for alternative eco-friendly cooling technologies. Considering the dielectric and piezoelectric properties of the (1-x)BaTiO3- xBi(Li1/3Ti2/3)O3 (0≤x≤0.2), this system was selected to study electrocaloric properties due to the presence of morphotropic phase boundary (MBP). The crystal structure of the samples that were synthesized by convential solid state reaction technique were determined by the X-Ray Diffraction experiments. The electrical properties of the ceramics were characterized by temperature-dependent dielectric measurements and the phase transition temperatures of the samples were identified. Temperature-dependent electrical polarization curves were measured for all compositions and electrocaloric temperature change values were calculated with the help of Maxwell equations. Using the dielectric measurements, a phase diagram was obtained. Strain-electric field measurements were done to complement dielectric and polarization measurements. A new antiferroelectric phase was discovered at high temperatures in the samples. As Bi(Li1/3Ti2/3)O3 content is increased, phase transition from the ferroelectric to antiferroelectric phase decreases. Since in the antiferroelectric phase the net polarization is very small, a large polarization change therefore large electrocaloric temperature change is obtained. Highest electrocaloric temperature change (ΔT=0.66 K under 22 kV/cm) is obtained for x=0.03 sample.Master Thesis Batio3 Based Ferroelectric Materials for Electrocaloric Cooling Applications(Izmir Institute of Technology, 2018) Şanlı, Keriman; Adem, Umut; Akdoğan, YaşarThe aim of this project was to produce electrocaloric materials and to determine the potential of these materials for electrocaloric cooling applications. The electrocaloric effect (ECE) of lead-free Ba0.8Sr0.2Ti1-xZrxO3 (0 ≤ x ≤ 0.10) ferroelectric ceramics was studied. The phase analysis of each ceramic composition that was synthesized by conventional solid-state reaction technique was performed by X-ray Diffraction. Dielectric measurements were done to determine the phase transition temperatures (Curie temperature, Tc) of all compositions and also construct a phase diagram. ΔT values were calculated indirectly using electrical polarization curves measured at different temperatures and Maxwell's equations. ΔT values that were obtained from different regions of the phase diagram are compared. The most suitable composition for applications was chosen considering the ΔT value, temperature range where relatively large ΔT is preserved and the Curie temperature of all ceramics. Ba0.8Sr0.2Ti0.93Zr0.07O3 ceramic located near the critical point shows the best performance with ΔT value of 0.40 K under 20 kV/cm. In comparison with the lead-free ceramics studied in the literature, Ba0.8Sr0.2Ti1-xZrxO3 system can be considered as one of the best candidates for future electrocaloric cooling technologies.