Master Degree / Yüksek Lisans Tezleri
Permanent URI for this collectionhttps://hdl.handle.net/11147/3008
Browse
2 results
Search Results
Master Thesis Selective Loading of Organofilic Ag Nanoparticles in Ps-Pmma Blends(Izmir Institute of Technology, 2014) Tüzüner, Şeyda; Demir, Mustafa Muammer; Ebil, ÖzgençThe association of nanoparticles with polymer blends offers significant features beyond the advantages of polymer composites prepared by single homopolymer. Since the blends undergo phase separation due to incompatibility of the constituent polymers into various internal structures, the particles can be segregated into one of the phases. Different location of the particles allows to develop novel microstructures; and thus, control over physical properties. In this study, Ag nanoparticles were prepared by reduction of AgNO3 via NaBH4. The particles were capped by cetyl ammonium bromide (CTAB) and were mixed with equimass blend of polystyrene (PS) and poly(methyl methacrylate) (PMMA) in tetrahydrofurane (THF). The solid content of blend solution was fixed at 2.5% w/v. The concentration of the particles with respect to polymer blend was at 0.7 wt %. The composite film was cast on glass slide. Surface feature of the composite films was examined by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The surface of blend film without particles shows spherical pits with a size of 4.5 μm and rich in terms of PMMA. When particle size was small (diameter is around 20 nm), they preferentially located at the interface of the domains. The large particles with a diameter of 90 nm were found to locate in PMMA phase. Upon annealing of the composite film at 165 ˚C for 3 days, the particles move to the PS domains independent of the particle size and merely PS loaded composite is achieved.Master Thesis Preparation and Characterization of Polymer-Zeolite Composite Membranes(01. Izmir Institute of Technology, 1999) Ebil, Özgenç; Çiftçioğlu, MuhsinThis thesis is on the investigation of polymer-zeolite composite membranes for gas separation and the effects of a number of parameters such as solvent and zeolite type, zeolite content, polymer/solvent ratio and preparation temperature on the microstructure of the final membrane. Although there is an increasing interest in polymeric composite membranes, most of the previous work concentrated on the synthesis and performance measurements of new membrane materials rather than the effects of different methods and parameters on processmg.In this study polymer-zeolite composite membranes were prepared by a phase inversion technique. Polysulfone, natural zeolite and synthetic zeolite 13X were used as polymer and second phases respectively. Dichloromethane and dimethylformamide were used as solvents. Four experimental sets of membranes containing the same polymer but different solvents and zeolites with increasing zeolite loadings were prepared and characterized by thermo gravimetric analysis, infrared spectroscopy, optical microscopy and scanning electron microscopy.It has been found that the types of the solvent and zeolite directly affect the final microstructure of the membranes. Solvent removal rate and distribution of zeolite particles are important and have strong effects on the mechanical performance of the membranes.Membranes prepared by using synthetic zeolite 13X and dichloromethane were determined to be the best zeolite distributions in the microstructure by optical microscopy and thermogravimetric analysis. Uniform and mechanically strong membranes with 20-60 % synthetic zeolite contents were prepared. Mechanically weak and relatively nonuniform membranes were prepared by using natural zeolite clinoptilolite. The incorporation of an ultrasonic treatment of the zeolite dispersion most likely contributed in the successful deagglomeration of the second phase in the polymer matrix.