Master Degree / Yüksek Lisans Tezleri
Permanent URI for this collectionhttps://hdl.handle.net/11147/3008
Browse
2 results
Search Results
Master Thesis Ceramic Microfiltration Membrane Design Towards Oil Removal in Metal Industry Wastewater Streams(01. Izmir Institute of Technology, 2020) Eren, Muhammet Şakir Abdullah; Çiftçioğlu, MuhsinIncreasing water scarcity is an important threat to the whole world. The use of too much water during the production processes and the insufficient level of reuse of this water and the increasing quantities of oil containing waste generated in many industrial activities cause dangerous consequences for the environment. Highly concentrated oil-inwater emulsions are very harmful for aquatic life, soil, atmosphere and human health. Traditional treatment methods are not effective in the removal of emulsified oil droplets which have less than 20 µm of droplet size. Ceramic micro/ultrafiltration membranes have been explored and developed in recent years due to their superior advantages in oil containing water treatment/purification. The aim of this MSc study was to produce tubular ceramic supports and microfiltration membranes for the removal of oil from stable oil in water emulsions used as metal cutting fluids. The prepared metal cutting fluids were fed to the crossflow filtration system and the effects of experimental parameters such as transmembrane pressure (TMP), crossflow velocity (CFV) and oil content on membrane performance/permeate flux were investigated. The single/double layered coatings on the support surfaces were formed in the preparation of the microfiltration membranes by using stable 0.4 µm α-alumina suspensions. The 1 layer and 2 layers containing microfiltration membranes were heavily fouled and very low permeate fluxes were obtained in an hour of treatment. This was attributed to the formation of a thin oil layer on the microfiltration membrane surfaces. The reduction of the total suspended solids (TSS) and turbidity were determined as ~100 %. A stable permeate flux with a lower extent of membrane fouling and concentration polarization was obtained with 1% oil content and the support membrane and TMP=2 bars.Master Thesis Preparation and Characterzation of Ceramic Micro/Ultra Membranes for Separation Processes and Wastewater Treatment(Izmir Institute of Technology, 2016) Kırkbaş, Öncel; Çiftçioğlu, MuhsinThe availability of fresh water is vital for life, sustainable growth and healthy ecosystems on earth. Increasing world population, a changing climate, intensive agricultural practices, economic growth and urbanization will undoubtedly continue to make the issue of water scarcity a global priority for years to come. The gap between the need and the supply of water globally is increasing steadily which necessitates significant measures to be taken towards conservation, and reuse of industrially, domestically and agriculturally used water. Textile industry is one of the leading industries in the use of fresh water and the generation of wastewaters. Technologies currently in use towards industrial and domestic water treatment like sedimentation, chemical coagulation, biological treatment etc. cannot produce reusable water but also generate significant amounts of solid waste. Membranes are now widely accepted to have the potential of supplying cost-effective solutions for water treatment and a growing range of purification and separation problems. The number and the pore structure design of the multiple selective layers on the inner surfaces of tubular α-alumina supports vary with the nature of the intended separation application. Although the nature of MF membranes is relatively well developed, current research is concentrated on the design of nanoporous phase structure in NF and UF selective layers. Selective micro/ultra/nanofiltration layers were formed on extruded tubular alumina supports by colloidal/sol-gel techniques. The performance of these selective layers were investigated by the experiments performed with textile wastewater. Permeates from ceramic tubular membranes were characterized by spectrophotometer. The suspended solids and color (Pt-Co) were reduced by 90% and 80%. respectively.