Master Degree / Yüksek Lisans Tezleri
Permanent URI for this collectionhttps://hdl.handle.net/11147/3008
Browse
20 results
Search Results
Master Thesis Investigations on Surface Electric Charge of Silica Nanoparticles With Different Surface Roughnesses(Izmir Institute of Technology, 2019) Alan, Büşra Öykü; Barışık, MuratSilica nanoparticles have been receiving more attention from diverse research areas recently due to their significant physical properties such as large pore volume and high internal surface area, colloidal stability, high biocompatibility, and tunable pore sizes. These silica nanoparticles are great candidates for drug delivery applications because they can transport a large amount of drugs into selective organs and tissues due to their high surface area and large pore volume. However, there are important drug delivery mechanisms that need to be understood properly such as cellular uptake, endosomal escape, drug loading and release, and crossing physical barriers. Physicochemical properties of nanoparticles (size, shape, surface charge, or surface chemistry) are important for understanding these mechanisms in order to develop successful drug delivery applications. This research investigates how these surface charge properties change with different particle, pore diameters, roughness structure on the nanoparticle surface, and different temperature and solution conditions. Also, we investigate how the surface charging behavior of rough nanoparticles interacts with a flat plate. Rough nanoparticles and their interactions with surfaces theoretical assumptions can be wrong and ionic distribution can show variation locally. In order to calculate ionic distribution and surface charge properties in these systems, proper equations and boundary conditions were employed. The charge regulation model was used as a boundary condition because of the electric double layer overlap effect. Results showed that there was a considerable variation on surface charge properties due to the roughness structure with different roughness and particle sizes and temperature difference.Master Thesis Influence of Ca2+ Ions on Freshly Precipitated Caco3 Particles(Izmir Institute of Technology, 2019) Majekodunmi, Olukayode Titus; Özdemir, EkremThe objective of this study was to develop a method to synthesize CaCO3 nanoparticles from a chemical precipitation reaction under ambient and high supersaturation conditions. Equimolar CaCl2 and Na2CO3 solutions were reacted in a tubular reactor at a constant rate. The particles growth inhibition was attempted by dispersing the reaction mixture in a continuously stirred Ca(OH)2 solution. This procedure separated the nucleation phase from the growth inhibition process, and was conducted without pH and composition control. The possibility of impeding the CaCO3 particles overgrowth was explored at different precipitants and Ca(OH)2 concentrations. Their effects on the particles morphology, colloidal stability and specific surface area were studied. Although rapidlysettling particles were produced at precipitants concentration of 100 mM, colloidally stable CaCO3 nanoparticles were obtained at concentrations ≤75 mM. Additive Ca2+ ions, provided by the Ca(OH)2 solutions, inhibited the crystals growth by adsorbing irreversibly on the growth sites. The synthesized particles were as much as 95% smaller than those obtained when pure H2O was used instead. Ca2+ ions concentration and amount of precipitated particles were observed to be important factors for monodispersity and high growth inhibition. Monodisperse and stable nanoparticles were synthesized at low reactants concentration and/or precipitates volume. Vaterite phase was observed in the particles obtained when pure H2O was used as the growth-inhibiting solution. However, the presence of additive Ca2+ ions effected the crystallization of pure calcite, regardless of Ca(OH)2 or precipitants concentration, reaction mixtures retention time in the tubular reactor, volume of precipitates, and the growth-inhibiting solutions initial pH.Master Thesis Design of Micelle Embedded Chitosan Nanocomposites for Targeted Delivery of Hydrophobic Drugs(Izmir Institute of Technology, 2016) Cihan, Esra; Polat, HürriyetWhen successed to synthesize in a nanoparticulate form, chitosan has found to be a very effective biomaterial for drug delivery purposes owing to its extremely attractive characteristics such as its positive charge and pH sensitivity in aqueous medium. However, its structure as it is, is not suitable for oil soluble drugs. Even a close control on the size and shape of chitosan particles alone becomes a state of art and the production of chitosan nanoparticles is very difficult. Therefore, in this study, several methods were designed and used for synthesis of chitosan nanoparticles (<100 nm) with a hydrophobic core that are suitable for oil soluble drugs. Characterization of these nanoparticles were done by Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope (SEM), Scanning Transmission Microscope (STEM), Transmission Electron Microscope (TEM), surface tension and zeta potential measurements. It was concluded that the best method was the coupling of drug loading with simple ionic gelation method among all the others. Hydrophobic drug loaded micelle embedded chitosan nano particles were able to manufactured successfully. The sizes of chitosan particles that embed Pluronic-123 micelles were larger (<100 nm) than the sizes of Pluronic-123 micelles (20 nm) alone. It was also possible to obtain smaller chitosan nanoparticles (<50 nm) that embed drug loaded Pluronic-123 micelles when their structure is modified by Sodiumdodecylsulfate.Master Thesis Immobilization of Thermophilic Esterase on Magnetic Cornstarch Nanoparticles for Biological Applications(Izmir Institute of Technology, 2016) Öz, Yasin; Şanlı Mohamed, GülşahIn last three decades, even the role of enzymes for biological and industrial applications has become more worthy, enzymes also have some defects. The enzyme immobilization allows to overcome these defects by improving abilities of reusing of catalysts by multiple times, easier reactor operation and product separation. Due to its potential use in biological and industrial applications, isolated thermophilic esterase from Geobacillus sp. was immobilized on magnetic cornstarch nanoparticles. In order to determine activity performance of immobilized enzyme, the effects of temperature, pH and some chemicals on enzyme activity were investigated. The results have shown that after immobilization, the relative activity of immobilized esterase has increased to 80% at 80 0C in comparison to free esterase. Therewithal, the reusability of immobilized esterase has increased fourfold in comparison to free esterase. The magnetic character of the support media has brought ease to separate biocatalysts from reaction media.Master Thesis Chitosan-Plasmid Dna Nanoparticles: Cytotoxic and Cytostatic Effects on Human Cell Lines(Izmir Institute of Technology, 2015) Bor, Gizem; Şanlı Mohamed, Gülşah; Demir, Mustafa MuammerAlthough chitosan nanoparticles (CNs) became a promising tool for several biological and medical applications owing to their inherent biocompatibility and biodegrability, studies regarding their effects on cytotoxicity and cytostatic properties still remain insufficient. Therefore, in the present study, we decided to perform comprehensive analysis of the interactions between CNs – pKindling-Red-Mito (pDNA) and different cell line models derived from blood system and human solid tissues cancers. The resulting CNs-pDNA was investigated with regard to their physical-chemical properties, cellular uptake and transfection efficiency, cytotoxic and cytostatic properties. The nanoparticles showed high encapsulation efficiency and physical stability even after 2 days for various formulations. Moreover, high gene expression levels were observed already 96 h after transfection. CNs-pDNA treatment, despite the absence of oxidative stress induction, caused cell cycle arrest in G0/G1 phase and as consequence led to premature senescence, which turned out to be both, p21-dependent and p21-independent. Also, observed DNMT2 upregulation may suggest the activation of different pathways protecting from the resulting CNs-mediated stress. In conclusion, treatment of different cell lines with CNs-pDNA showed that their biocompatibility was limited and effects were cell type-dependent.Master Thesis Immobilization of Olive Leaf Extract on Chitosan Nanoparticles and Investigation of Their Effects on Cancer Cell Lines(Izmir Institute of Technology, 2014) Özdamar, Burcu; Şanlı Mohamed, GülşahCancer incidence and mortality rates are increasing worldwide in both economically developed and developing countries. Breast cancer in females and lung cancer in males are the most common cancer types. Epidemiological research has provided increasing evidence that dietary habits, especially Mediterranean diet which has high consumption of olive oil and its products, may play an important role in lung and breast cancer. Due to their preventive effect against cancer, olive leaf extract rich in polyphenols was immobilizied on chitosan nanoparticles which are good drug carriers because of their biocompatible and biodegradable properties with the help of capability of passing through biological barriers. For this aim, olive leaf extract loaded chitosan nanaoparticles were synthesized by ionotropic gelation mechanism. Optimum conditions to synthesize nanoparticles were determined by investigation of the effect of chitosan and tripolyphosphate mass ratio, initial pH of chitosan solution, concentration of olive leaf extract and incubation time of olive leaf extract and tripolyphosphate with chitosan solution. Characterization of nanoparticles was performed by dynamic light scattering, atomic force microscopy and infrared spectroscopy. To investigate the anticancer properties of nanoparticles, molecular biological studies were performed by in vitro cytotoxicity studies based on MTT assay, in vitro cell cycle analysis and apoptosis by flow cytometer and imaging of cells by optical microscopy. In results, olive leaf extract loaded chitosan nanaoparticles obtained approximately 91.25 nm and showed more cytotoxicity than chitosan nanoparticles, chitosan and olive leaf extract for both lung and breast cancer cells. In contrast, there was no cytotoxicity for healthy cells. These effects were supported by cell cycle analysis. Also in optical imaging, lower number of cells and morfological differences on cancerous cells which supports the cytotoxicity results were observed. We can conclude that our results will open a new approach to use not only cytotoxic anticancer drug for cancerous cells but also biocompatible material for biomedical applications.Master Thesis Selective Loading of Organofilic Ag Nanoparticles in Ps-Pmma Blends(Izmir Institute of Technology, 2014) Tüzüner, Şeyda; Demir, Mustafa Muammer; Ebil, ÖzgençThe association of nanoparticles with polymer blends offers significant features beyond the advantages of polymer composites prepared by single homopolymer. Since the blends undergo phase separation due to incompatibility of the constituent polymers into various internal structures, the particles can be segregated into one of the phases. Different location of the particles allows to develop novel microstructures; and thus, control over physical properties. In this study, Ag nanoparticles were prepared by reduction of AgNO3 via NaBH4. The particles were capped by cetyl ammonium bromide (CTAB) and were mixed with equimass blend of polystyrene (PS) and poly(methyl methacrylate) (PMMA) in tetrahydrofurane (THF). The solid content of blend solution was fixed at 2.5% w/v. The concentration of the particles with respect to polymer blend was at 0.7 wt %. The composite film was cast on glass slide. Surface feature of the composite films was examined by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The surface of blend film without particles shows spherical pits with a size of 4.5 μm and rich in terms of PMMA. When particle size was small (diameter is around 20 nm), they preferentially located at the interface of the domains. The large particles with a diameter of 90 nm were found to locate in PMMA phase. Upon annealing of the composite film at 165 ˚C for 3 days, the particles move to the PS domains independent of the particle size and merely PS loaded composite is achieved.Master Thesis Development of Whey Protein Isolate Based Nanocomposite Food Packaging Film Incorporated With Chitosan and Zein Nanoparticles(Izmir Institute of Technology, 2014) Oymacı, Pelin; Alsoy Altınkaya, Sacide; Demir, Mustafa MuammerThe purpose of this study was to investigate the effect of chitosan and zein nanoparticles addition on the barrier and mechanical properties of whey protein isolate (WPI) films as an alternative to conventional synthetic packaging materials. Chitosan nanoparticles (CSNP) were produced via ionic gelation method using sodium tripolyphosphate (TPP) and deacetylated chitosan. Zein nanoparticles (ZNP) were synthesized based on antisolvent procedure in the presence of sodium caseinate (SC) to enable dispersion in water. Both plain and nanoparticle added WPI films were prepared by solution casting method. Water vapor barrier and mechanical properties of films were measured and the improvements in these properties with nanoparticle addition was further investigated through surface wetting, morphological, viscoelastic and thermal properties of the films. Both nanoparticles significantly decreased the water vapor permeability (WVP) and improved the mechanical properties of the WPI film. The highest enhancement in barrier and mechanical properties of the WPI films were recorded with 20% (w/w of WPI) CSNP and 120% (w/w of WPI) ZNP addition which corresponded to the maximum nanoparticle loading levels. At these loadings, the average WVP of pure WPI films loaded with ZNP and CSNP decreased by 84% and 57%, and the average tensile strength increased by 304% and 161%, respectively. On the other hand, the nanoparticles did not change the elongation at break significantly. ZNP was found more effective than CSNP in improving barrier and mechanical properties of the WPI films due to its hydrophobic nature and better dispersion in the protein matrix which allowed much higher loadings compared with the maximum loading levels achieved with CSNP. CSNP addition imparted antibacterial activity to the WPI films.Master Thesis Tribological Behaviour of Polymer Nanocomposities Containing Tungsten Based Nanoparticles(Izmir Institute of Technology, 2007) Karal, Kazım; Tanoğlu, MetinThe use of nanostructured fillers in epoxy systems has a significant role on the development of thermosetting composites. Recent investigations on inorganic nanoparticles filled polymer composites reveal their significant potential in producing materials with low friction and/or high wear resistance. In the present study, epoxy nanocomposites and fiber reinforced polymer (FRP) composites were prepared with the addition of tungsten based nanostructured particles which are produced by mechanical alloying. The effects of the nanostructured additives on the tribological, mechanical and thermal properties of composite laminates and nanocomposites were investigated. Composite laminates with and without filler were manufactured by using hand lay-up technique and cured under compression. It was found that tungsten based particle loading has no significant effect on the flexural properties of the nanocomposites and the composite laminates, and the tensile properties of the nanocomposites. It was found that while the addition of 3 wt. % of nanoparticles increases the hardness values, it significantly improves the wear resistance of nanocomposites. Furthermore, the significant improvement on the wear resistance was observed with the addition of 3 wt. % W-SiC-C (24h mechanical milling) powder onto the surface of fiber reinforced epoxy. The worn surfaces were examined with scanning electron microscopy (SEM) and the results revealed that wear mechanisms are altered due to the presence of nanoparticles in the matrix. Differential scanning calorimetry (DSC) results showed that nanoparticles have no significant effect on glass transition temperatures (Tg) of nanocomposites. Incorporation of nanoparticles increased the thermo mechanical properties of nanocomposites and composite laminates; including the storage and loss modulus and Tg.Master Thesis Investigation of Gas Sensing Properties of Nanoparticles Functionalized With Ferrocene Molecules(Izmir Institute of Technology, 2013) Güzelaydın, Abdurrahman Halis; Tarhan, EnverIn this study, gas sensing properties of ferrocene functionalized multi-wall carbon nanotubes (MWCNT) and iron oxide nanoparticles were investigated via acoustic wave and electrical based techniques. Commercially obtained multi-wall carbon nanotubes having amine functional groups grafted directly onto their surfaces were covalently functionalized with ferrocene molecules. Iron oxide nanoparticles synthesized by the alkaline coprecipitation of ferric and ferrous salts were functionalized with ferrocene molecules. Dispersions of each modified nanoparticle in 3 mL ethanol were prepared and sonicated for 12 h in order to ensure adequate homogeneity. 5 ï L from each of these dispersions were then drop-cast onto AT-cut gold coated quartz crystal microbalance (QCM) and gold interdigitated (IDE) glass electrodes with 3 ï m interdigit spacing followed by drying on hotplate at 60 °C for 30 min to deposit thin-films. The thin-film coated electrodes were exposed to alternately varying concentration levels of CO, CO2, O2 and humidity ranging from 0 vol% to 100 vol% in predetermined intervals by a computer controlled mass flow meter array in an electromagnetically shielded and hermetically sealed measurement cell specifically designed to acquire QCM and electrical signals from the electrodes. Gas sensor responses of the thin-film coated QCM electrodes were assessed by measuring the frequency shift of the vibrating quartz crystal from its natural resonance frequency and evaluating that value into adsorbed mass according to Sauerbrey relation, whereas, responses from the interdigitated electrodes were assessed by measuring the resistance changes through the thin-film coating under a compliance current value of 1.0000 mA.