Master Degree / Yüksek Lisans Tezleri

Permanent URI for this collectionhttps://hdl.handle.net/11147/3008

Browse

Filters

20122

Settings

Department: search.filters.department.Thesis (Master)--İzmir Institute of Technology, Chemical EngineeringSubject: search.filters.subject.Atomic force microscopy

Search Results

Now showing 1 - 2 of 2
  • Master Thesis
    Design and Characterization of Shell Structure of Microbubbles Used in Ultrasound Imaging
    (Izmir Institute of Technology, 2012) Bölükçü, Elif Şeniz; Kılıç Özdemir, Sevgi; Kılıç Özdemir, Sevgi; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    The main goal of the study is to redesign the microbubble (MB) shell structure and investigate the interactions between the shell components in the mixed monolayers treated as a model for MBs’ shell in order to improve the stability. To examine effects of emulsifier type (DSPC/PEG40 St, DSPC/DSPE-PEGn) and additional components (DSPC/PEG40 St/DSPG, DSPC/PEG40 St/DSPA, DSPC/PEG40 St/DSPE) on stability, molecular interactions and morphological properties, mixtures having various compositions were investigated by Langmuir Blodgett (LB) method and Atomic Force Microscope (AFM) and Brewster Angle Microscope (BAM). For DSPC/PEG40 St monolayers thermodynamically analysis indicated that the attractive forces between the components in the monolayer of 30% PEG40 St were very strong. It was observed that addition of large amount of peg-grafted phospholipids (lipopolymer) increased the attractive forces between molecules in DSPC/DSPE-PEG1000 and DSPC/DSPE-PEG350 monolayers unlike DSPC/DSPE-PEG2000 monolayers. Additionally, the use of different phospholipid as an additional component such as DSPG, DSPE and DSPA in DSPC/PEG40 St mixture signified that intermolecular forces were influenced by the monolayers’ compositions and polar headgroups differences. It was noticed that among the ternary mixtures consisting 70% DSPC, DSPC/PEG40 St/DSPE monolayers exhibited stronger molecular interaction than DSPC/PEG40 St/DSPG and DSPC/PEG40 St/DSPA monolayers while DSPC/PEG40 St/DSPA mixtures showed stronger interaction for mixtures composed of 50% PEG40 St. However, phase separations detected at some regions for these monolayers by BAM and AFM may affect the stability negatively. Therefore, thermodynamically analysis, BAM and AFM results should be evaluated together to assess potential MBs’ shell structures.
  • Master Thesis
    Determining Charge Distribution of Metal Oxide Surfaces With Afm Using Colloid Probe Technique
    (Izmir Institute of Technology, 2012) Güler, Ayşe; Polat, Mehmet; Polat, Mehmet; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    Colloidal systems of micron-sized particles dispersed in a solvent are widely encountered in numerous industries. Homogeneity, dispersibility, rheology and forming characteristics of these systems depend solely on particles-particle interactions which in turn are determined by Van der Waals (vdW) and Electrical Double Layer (EDL) forces. The vdW forces are not affected by system chemistry. However, the EDL forces, which arise from the charging of on solid surfaces in a solvent, vary significantly with solution chemistry. So, manipulation of electrical forces is used widely in industrial applications to manipulate colloidal systems. Colloidal particles in solution carry a distribution of positive, negative and neutral charges depending on solution chemistry. Electrophoretic potential mesurements or colloidal titration methods yield only an average charge for the whole population, not the charge distribution on each particle surface. The streaming potential techniques also provide an average charge on the surface. Currently, there is no accepted technique to determine the charge distribution on solid surfaces. This work aims at using Atomic Force Microscopy (AFM) as a charge probe to achieve exactly this. The work improves on a recent study (Yelken, 2010) which used commercial SiN4 cantilevers to determine the charge distribution on quartz and sapphire surfaces by replacing SiN4 cantilevers with custom-made colloid probes of desired material (quartz in this case) to probe the surface. The current work which improves the flexibility and resolution of the method was tested with two quartz and