Master Degree / Yüksek Lisans Tezleri

Permanent URI for this collectionhttps://hdl.handle.net/11147/3008

Browse

Filters

2004 - 200912010 - 20171

Settings

Department: search.filters.department.Thesis (Master)--İzmir Institute of Technology, Chemical EngineeringSubject: search.filters.subject.Nanostructured materials

Search Results

Now showing 1 - 2 of 2
  • Master Thesis
    Preparation and Application of Subnano Ceramic Filtration Membranes for Organic Species Removal From Aqueous Streams
    (Izmir Institute of Technology, 2017) Yaltrık, Kaan; Çiftçioğlu, Muhsin; Çiftçioğlu, Muhsin; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    The purpose of this MSc work was to investigate the effects of neodymium/zirconium doping on the phase structure evolution of the selective titania nanofiltration (NF) membrane layers for the rejection of subnano sized organic compounds. A dilatometric study was carried out on unsupported membranes prepared from polymeric sols with different neodymium and zirconium levels. The development of functional abilities towards the design of the pore structure in the subnano range by controlling the nanostructural evolution of the selective NF layers was the fundamental purpose of this work. The neodymium doping level was varied in the 0.3-5.0% range and the zirconium mixing level was varied in the 0-100% range based on stable metal oxide molar compositions. Dilatometric characterization results have shown that dopant level effects the nanophase evolution and the densification behavior considerably. The dynamic light scattering results have shown that the polymeric species in the sol were predominantly 2-4 nm in size and had a very narrow size distribution. XRD analysis results indicated titania anatase crystallite sizes were reduced significantly with neodymium doping or zirconia mixing and the phase transformations were retarded by about 200°C. HR-TEM images of selected zirconia mixed or neodymium doped unsupported membrane powders also added new information to the XRD/dilatometry derived nanophase evolution results. The determination of the molecular weight cut-off values and pure water fluxes of the NF membranes which would be prepared by using these polymeric sols in the near future may generate valuable knowledge on the subnano separation abilities of these NF membranes.
  • Master Thesis
    Processing and Characterization of Nanocrystalline Materials
    (Izmir Institute of Technology, 2004) Genç, Gözde; Çiftçioğlu, Muhsin; Çiftçioğlu, Muhsin; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    Nanocrystalline materials with grain sizes under 100 nm have been counted as a very promising class of ceramic materials. The decrease in grain size imparts superior structural properties to the ceramic materials like increased fracture toughness, wear resistance and superplastic deformation at high temperatures. So, nanocrystalline ceramics can be used as structural materials in a wide range of uses covering advanced engineering applications such as aircraft and automotive technologies as well as electronics, computation and material sciences. Nanocrystalline alumina has been a popular research subject for the last decade because of the superior structural properties of alumina besides lower cost compared to other nanocrystalline materials like zirconia and titania. The raw materials are generally transitional aluminas or aluminum hydroxides such as boehmite and gibbsite all of which are widely used in industry.The main problem in nanocrystalline alumina production is to cope with agglomeration of fine powders or nano-particles in solutions due to interaction forces. Agglomeration cause nonhomogeneous microstructure with respectively larger pores which are very hard to eliminate during sintering. In this study a nanocrystalline commercial boehmite powder is used as the starting material and a homogeneous microstructure with respectively high density is aimed. Ultrasonic treatment is applied in order to reduce particle size and the stable dispersions of boehmite powder with a solid content of 30wt% was dried by spray drying. The effect of ultrasonic treatment, spray drying and compaction conditions were investigated and compared with bodies compacted from untreated powders. To see the effect of seeding on phase transformation behavior of boehmite, alpha alumina particles produced by combustion synthesis and broken into crystallites by ultrasonic treatment were used with a seed content less than 0.5%. Even that low amount of a-alumina reduced the transformation temperature by 100C but did not improve densification of alumina compacts. The homogeneity of microstructure obtained by ultrasonic treatment and granulation by spray drying yielded the highest relative densities of 65.5 % of the theoretical density. The treatment has also led more uniform microstructures compared to untreated and seeded samples during the a-phase transition which is the most important stage for densification.