Master Degree / Yüksek Lisans Tezleri

Permanent URI for this collectionhttps://hdl.handle.net/11147/3008

Browse

Filters

2002 - 20072

Settings

Department: search.filters.department.Thesis (Master)--İzmir Institute of Technology, Chemical EngineeringSubject: search.filters.subject.Polypropylene

Search Results

Now showing 1 - 2 of 2
  • Master Thesis
    Preparation and Characterization of Corn Zein Coated Polypropylene (pp) Films for Food Packaging Applications
    (Izmir Institute of Technology, 2007) Atik, İsa Doğan; Tıhmınlıoğlu, Funda; Tıhmınlıoğlu, Funda; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    The plasticized corn-zein coatings on polypropylene (PP) films as an alternative to multilayer packaging films consisting of non-degradable polymers were prepared to evaluate barrier, mechanical, thermal, surface and optical properties of the resulting coated film, as affected by coating formulation (solvent, corn-zein, plasticizer concentration, and plasticizer type). PP films coated with corn zein were obtained through a simple solvent casting method. Corn-zein with different amounts (5% and 15%) was dissolved in 70% and 95% aqueous ethanol solution at 50oC, respectively. Solutions of corn-zein plasticized by polyethylene glycol (PEG) and glycerol (GLY) with various levels (20% and 50%) were applied on corona-discharged-treated PP film. The resulting corn-zein coated PP films showed good appearance, flexibility and adhesion between the coating and the base film. The coated PP films showed a significant (P<0.05) increase in barrier (water and oxygen) properties and improvement in mechanical properties when coating formulation consisted of higher corn-zein content and lower amount of GLY as plasticizer. Furthermore, zein coating increased the service temperature range of the PP films, and promised good printability on the surface due to contact angle results. The statistical analysis defined that the key parameters of coating formulation that had major effect on the final properties of coated PP films as corn-zein concentration, plasticizer concentration, and plasticizer type while ethanol concentration was found to be as less effective parameter compared to others. In conclusion, corn zein coatings with appropriate formulation on PP films could have potential as an alternative to conventional synthetic coatings for food packaging applications.
  • Master Thesis
    Interfacial Enhancement of Polypropylene-Zeolite Composites
    (Izmir Institute of Technology, 2002) Metin, Dildare; Tıhmınlıoğlu, Funda; Tıhmınlıoğlu, Funda; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    The objective of this study was to improve the properties of polypropylene-zeolite composites by enhancement of the interphase between polypropylene and zeolite. Surface treatment of zeolite was applied for modification of interfacial interactions between zeolite and polypropylene. Surface treatment of natural zeolite was carried out with (3 wt%) polyethyleneglycol (PEG) and three different silane coupling agents namely, 3-aminopropyltriethoxysilane (AMPTES), methyltriethoxysilane (MTES), and 3-mercaptopropyltrimethoxysilane (MPTMS) at four different concentrations (0.5, 1, 1.5 and 2 wt%) to find suitable surface modifier for improving filler compatibility and mechanical properties. PP composites containing (2, 4 and 6 wt%) untreated or treated zeolite and plasticizers: dioctylphthalate (DOP) or epoxidized soybean oil (EPS) were prepared by extrusion technique. The effects of the modifications and zeolite content on the thermal, mechanical, structural and physical properties of PP composite were investigated. The contact angle measurements and FTIR analyses of untreated and silane treated zeolite samples and water sorption results of PP-zeolite composites showed that hydrophobicity of zeolite significantly increases with surface modification. Thermal analyses indicated that the addition of zeolite and silane treatment to the PP-EPS matrix did not change the melting and degradation temperature of the composites. However, these modifications were found to increase the crystallinity and crystallization temperature of the composites due to the nucleating effect of the zeolite. The mechanical properties of PP composites containing silane treated zeolite indicated significant improvements compared to the composites containing untreated filler. The most enhanced dry and wet mechanical properties were observed for PP composites containing 1 wt% AMPTES treated zeolite. The effect of interfacial interactions and adhesion between zeolite and PP was evaluated by various semiemprical equations: Pukanszky model, Nicholais and Narkis model and Nielsen model. The improvement in adhesion between silane treated zeolite and PP was also confirmed from these models. Moreover, the water sorption and mechanical test results, as well as scanning electron micrographs and optical micrographs of the composites verify that silane coupling agents enhanced compatibility and interfacial adhesion between zeolite particles and PP matrix strongly led to an improvement of the mechanical properties of the composites. Consequently, 1 wt% AMPTES was proposed to be the most appropriate surface modifier by considering the water sorption results, thermal, mechanical and microstructure analyses of PP-zeolite composites.