Master Degree / Yüksek Lisans Tezleri
Permanent URI for this collectionhttps://hdl.handle.net/11147/3008
Browse
14 results
Search Results
Master Thesis Effects of Surface Treatments on Fatigue Performance of Adhesively Bonded Single Lap Joint Carbon Fiber Based Polymer Composites(01. Izmir Institute of Technology, 2024) Gürbüz, Ahmet AyberkYeni teknolojilerin ortaya çıkışını takip eden dönemde, alternatif birleştirme teknikleri karbon elyaf takviyeli polimerleri içeren uygulamalarda geleneksel mekanik bağlantı elemanlarının yerini almaya başlamıştır. Gerilme konsantrasyonu, ağırlık, radar sinyallerinin emilmesi ve korozyon gibi mekanik bağlantı elemanlarıyla ilgili zorlukların çoğu, CFRP'ler alanında yapıştırıcı bağların kullanılmaya başlanmasıyla etkili bir şekilde ele alınmıştır. Bununla birlikte, kirletici maddelerin varlığı ve yüzey tabakasındaki matris fazlalığı da dahil olmak üzere çeşitli faktörler yapışma gücü üzerinde önemli bir etkiye sahiptir. Bu tezin amacı, yüzey işleminin uygulanmasının, yapışkan olarak bağlanmış karbon elyaf takviyeli polimer kompozit plakaların yorulma performansı üzerindeki etkilerini incelemektir. [45/-45/45/0/-45/90]s istifleme sırasına sahip karbon fiber takviyeli polimer laminatlar, otoklav tekniği ile tek yönlü prepregler kullanılarak üretilmiştir. Karbon fiber takviyeli polimer laminatların yapışma yüzeyine lazer işlemi ve elektrospinning olmak üzere iki farklı yüzey işlemi uygulanmıştır. Farklı yüzey işlemlerine tabi tutulan kompozitlerin yorulma performansını araştırmak için yük kontrollü çekme-germe yorulma testleri yapılmıştır. Numuneler, statik tek bindirmeli kesme testlerinden belirlenen ortalama maksimum tek bindirmeli kesme yükünün %30 ila %50'si arasında değişen gerilme seviyelerinde döngüsel yüklemeye tabi tutulmuştur. Yüzey işlemlerinin yapışma yüzeyinin yorulma performansı üzerindeki etkileri SEM görüntüleri, sertlik bozulması ve Wöhler eğrileri kullanılarak yorumlanmıştır.Master Thesis Process Parameters and Mechanical Properties of Geopolymer Glass Foam Structures(01. Izmir Institute of Technology, 2020) Polat, Dilan; Güden, MustafaThe effects of waste-glass powder particle size (23 and 72 μm), solid/liquid ratio (S/L=1, 1.5 and 2) and aluminum foaming agent content (2-20 wt%) on the expansion behavior of geopolymer slurries were investigated experimentally. Geopolymer slurries were prepared using an activation solution of NaOH (8M) and sodium silicate (10% NaOH, 27% SiO2). The expansions and temperatures of the slurries were measured in-situ using a laser distance meter and a thermocouple, respectively. Few geopolymer foams were sintered at 600, 700, 725 and 750 °C. The compression strengths and thermal conductivities of foam samples were also determined. The expansion of slurries continued until the temperature increased to 85-90 °C. At this temperature, the slurry evaporation; hence, increased S/L ratio limited both the hydrogen release rate and geopolymerization reaction. As the content of Al increased, the final foam density decreased, while the coarse powder slurries resulted in lower densities (240-530 kg m-3) than the fine powder slurries (280-530 kg m-3). Three crystal phases, muscovite, sodium aluminum silicate hydrate and thermonitrite, were determined after the geopolymerization. The muscovite formation was noted to be favored at higher S/L ratios. The partial melting of glass particles started after ~700 °C, while sintering above this temperature decreased the final density. The reduced density above 700 °C was ascribed to the release of carbon dioxide by the decomposition of thermonitrite. Both the compressive strength and thermal conductivity of geopolymer and sintered foams increased at increasing densities and were shown to be comparable with those of previously investigated geopolymer and glass foams. The geopolymer foams sintered at 750 °C exhibited the lowest density and the highest compressive strength.Master Thesis Preparation and Characterization of Calcite (caco3) Particulate Filled Thermoplastic Composites(Izmir Institute of Technology, 2014) Kızıltepe, Esin; Tanoğlu, MetinNano-sized particle filled polymer composites have been received great attention of researchers and industrial institutions in recent years due to their unique properties, save as high mechanical strength, thermal and solvent resistance as compared to traditional composite materials. In this study, calcium carbonate (CaCO3) filled polypropylene (PP) and Polyethylene (PE) composite blends were prepared using a co-rotational twin screw extruder with a calcite particle content varying from 0 to 30 wt. % . Tensile and three-point bending test coupons were prepared by injection moulding using the extruded composite blends. The effects of calcite reinforcement (with and without stearic acid treatment) on the microstructural, thermal and mechanical properties of neat PP and PE were investigated. Nano-CaCO3 powders were characterized by means of Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD). The PE and PP were characterized via differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Analytical results were compared with the experimental results.Master Thesis Selective Loading of Organofilic Ag Nanoparticles in Ps-Pmma Blends(Izmir Institute of Technology, 2014) Tüzüner, Şeyda; Demir, Mustafa Muammer; Ebil, ÖzgençThe association of nanoparticles with polymer blends offers significant features beyond the advantages of polymer composites prepared by single homopolymer. Since the blends undergo phase separation due to incompatibility of the constituent polymers into various internal structures, the particles can be segregated into one of the phases. Different location of the particles allows to develop novel microstructures; and thus, control over physical properties. In this study, Ag nanoparticles were prepared by reduction of AgNO3 via NaBH4. The particles were capped by cetyl ammonium bromide (CTAB) and were mixed with equimass blend of polystyrene (PS) and poly(methyl methacrylate) (PMMA) in tetrahydrofurane (THF). The solid content of blend solution was fixed at 2.5% w/v. The concentration of the particles with respect to polymer blend was at 0.7 wt %. The composite film was cast on glass slide. Surface feature of the composite films was examined by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The surface of blend film without particles shows spherical pits with a size of 4.5 μm and rich in terms of PMMA. When particle size was small (diameter is around 20 nm), they preferentially located at the interface of the domains. The large particles with a diameter of 90 nm were found to locate in PMMA phase. Upon annealing of the composite film at 165 ˚C for 3 days, the particles move to the PS domains independent of the particle size and merely PS loaded composite is achieved.Master Thesis Tribological Behaviour of Polymer Nanocomposities Containing Tungsten Based Nanoparticles(Izmir Institute of Technology, 2007) Karal, Kazım; Tanoğlu, MetinThe use of nanostructured fillers in epoxy systems has a significant role on the development of thermosetting composites. Recent investigations on inorganic nanoparticles filled polymer composites reveal their significant potential in producing materials with low friction and/or high wear resistance. In the present study, epoxy nanocomposites and fiber reinforced polymer (FRP) composites were prepared with the addition of tungsten based nanostructured particles which are produced by mechanical alloying. The effects of the nanostructured additives on the tribological, mechanical and thermal properties of composite laminates and nanocomposites were investigated. Composite laminates with and without filler were manufactured by using hand lay-up technique and cured under compression. It was found that tungsten based particle loading has no significant effect on the flexural properties of the nanocomposites and the composite laminates, and the tensile properties of the nanocomposites. It was found that while the addition of 3 wt. % of nanoparticles increases the hardness values, it significantly improves the wear resistance of nanocomposites. Furthermore, the significant improvement on the wear resistance was observed with the addition of 3 wt. % W-SiC-C (24h mechanical milling) powder onto the surface of fiber reinforced epoxy. The worn surfaces were examined with scanning electron microscopy (SEM) and the results revealed that wear mechanisms are altered due to the presence of nanoparticles in the matrix. Differential scanning calorimetry (DSC) results showed that nanoparticles have no significant effect on glass transition temperatures (Tg) of nanocomposites. Incorporation of nanoparticles increased the thermo mechanical properties of nanocomposites and composite laminates; including the storage and loss modulus and Tg.Master Thesis Preparation and Physical Characterization of Clay/Epdm Nanocomposites(Izmir Institute of Technology, 2008) Karşal, Çiçek; Tanoğlu, MetinPolymer/clay nanocomposites have been extensively studied in recent years because they often exhibit improved properties different from their micro and macrocomposite counterparts. Addition of organophilic layered silicates to the polymer produces effective polymer nanocomposites by intercalation of macromolecules into the interlayer spaces. The performance of polymer/clay composites is not only related to the nature of the clay but also to the reinforcing mechanism of filler and the preparation conditions.In this study, the effects of mixing conditions and effect of aging on mechanical,physical and thermal properties of ethylene-propylene-diene rubber (EPDM)/Organo modified montmorillonite (OMMT) nanocomposites were studied at two different clay loadings 5 wt.% and 10 wt.%. EPDM/OMMT nanocomposites were prepared by melt blending method. The experimental results of X-ray diffraction (XRD) and scanning electron microscopy showed that the organically modified MMT existed in the form of an intercalated structure and that was exfoliated in EPDM matrix depending on the mixing conditions. XRD patterns showed that the interlayer distance of the organically modified clay was 30.9A, which was larger than those of the unmodified clay (14.6A).The mechanical evaluation of the nanocomposites was performed by tensile and tear testing. The mechanical tests showed that the properties of nanocomposites were significantly improved with addition of OMMT. The effects of the processing conditions were manifested in both the morphology and mechanical properties, which showed significant increase when optimized process conditions are applied. In addition, chemical test was performed on the nanocomposites to monitor the degradation of the mechanical properties. It was found that the reduction of the mechanical properties of nanocomposites after aging process is lower as compared to those of neat EPDM.Master Thesis Preparation and Characterization of Polypropylene Based Composite Films(Izmir Institute of Technology, 2001) Pehlivan, Hilal; Tıhmınlıoğlu, FundaIn the scope of this study, preparation of silver . natural zeolite reinforced polypropylene (PP) composite system possessing antibacterial properties via ion exchange process and characterization by means of different techniques (FTIR, TGA, DSC, mechanical tests, optical microscopy) were aimed. It has been established that zeolites are suitable for removing Ag ions from silver containing solutions and that silver zeolites are increasingly investigated as germicidal, bactericidal, antifungal, and antiseptic components in different compositions (Hagiwara 1990, Kawahara 2000, Klasen 2000).In the present study, prior to the ion exchange studies, water sorption behavior of PP . clinoptilolite rich natural zeolite composites was investigated, since the ion exchange process was to be conducted in aqueous media. It was observed that a hydrophobic polymer, PP attained the property of water sorption due to the porous structure of the composite films. The effective diffusivity of liquid water in the PP-zeolite composites prepared by hot press and extrusion techniques varied in the range of 0.3- 9.9 x10-10 and 0.1 - 3.3 x10-12 cm2/s, respectively. Silver loading to PP - zeolite composites was provided by means of two different methods. In Method I, PP - zeolite composite films were treated with a variety of silver ion containing solutions (5 to 50 ppm AgNO3 solution), whereas in Method II silver exchanged zeolite minerals (prepared with initial AgNO3 concentrations of 50, 500, and 5000 ppm) were molded with PP in the presence of DOP (Dioctyl Phthalate). The amounts of Ag+ loaded per gram of zeolite for initial AgNO3 concentrations of 50, 500, and 5000 ppm were determined as 4.36, 27.85, and 183.78 mg, respectively. Antibacterial activity tests against E.coli indicated that the samples obtained in Method II were superior to those prepared by Method I since the penetration of silver ions to the zeolite phase was limited by the PP phase in the case of Method I. However, the discoloring effect of silver ion was readily observed for the samples prepared by Method II as indicated by the discoloration parameters. The release of Ag+ to water was found to be negligible as reported in literature leading to long . term antibacterial activity.The thermal characterization studies showed that the addition of the zeolite increased the crystallinity of the structure acting as a nucleating agent in PP crystallization as well as retarded the degradation temperature of PP. At low silver concentrations, the zeolite behaved as a decelerating agent in PP, however at higher silver concentrations, the composites degraded at a faster rate than pure PP. Yet the activation energy values for the thermal decomposition reactions of Method II was considerably lower indicating that the decomposition has been accelerated by the presence of silver.It was found that the addition of the zeolite into the PP matrix decreased the density of pure PP (0.89 g/cm3) due to the formation of voids. However, a systematic approach was not observed with the increasing zeolite content as a consequence of the uneven zeolite distribution. On the other hand, a considerable enhancement was noticed for the tensile tested film densities changing between 0.58 - 0.78 g/cm3, which are in a better agreement with the commercially desired range (0.6 - 0.65 g/cm3) for packaging applications of PP composites. Mechanical tests indicated that the addition of the zeolite tended to decrease the yield stress values while a slight decrease was observed for Young moduli. The effect of silver on the Young Modulus values of the composites is not quite significant, however the yield stress values increased from 23.6 to 29.5 MPa with the increasing silver concentration.Consequently, of all the composite films prepared by Method II, the ones loaded with 4.36 (mg Ag+/g zeolite) containing 2, and 4 % wt zeolite were selected to be the most appropriate, considering the thermal, mechanical, and structural characteristics as well as the discoloring actions.Master Thesis Preparation and Characterization of Hydroxyopatite and Polymer Composite Biomaterials(Izmir Institute of Technology, 2002) Gültekin, Naz; Tıhmınlıoğlu, FundaIn the thesis, the preparation and characterization of polylactide-Hydroxyapatite(HA) composite films for biomaterial applications have been studied. The effects of number of parameters such as polymer type, HA loading, surface modification and its concentration on the mechanical, thermal microstructural and hydrolytic degradation properties of the composites were investigated. Four different types of polymers, Poly (L-lactide)(PLA1), 96/4 L-lactide,D-Lactide Copolymer (PDLA1), Poly (L-Lactide)(PLA2), and 67/23 Poly (L-Lactide-co-D,L-Lactide)(PDLA2), have been used. In this study, PolyLactide-HA composite films have been prepared by solvent-casting technique. The HA powder was synthesized by precipitation technique. Interfacial interactions between HA and polylactide polymer were modified to improve filler compatibility and mechanical properties of the composites by surface treatment of the HA with two different silane coupling agents; 3-aminopropyltriethoxysilane (AMPTES) and 3-mercaptopropyltrimethoxysilane (MPTMS) at three different concentration. Silane treatment indicated better dispersion of HA particles in the polymer matrix and improvements in the mechanical properties of the composites compared to the untreated HA loaded polylactide composites. Tensile test results showed that the maximum improvement in the mechanical properties of the composites was obtained for the PLA composites containing 1 wt % aminofunctional silane treated HA and 0.5 wt % mercaptopropyltrimethoxy silane treated HA for PDLA composites. Scanning electron microscopy studies also revealed better dispersion of silane treated HA particles in the polymer matrix. Thermal degradation kinetics of the composites was investigated and it was found that addition of HA into polymer matrix decreased the thermal degradation temperature and also slowed down the degradation rate. In this study, the hydrolytic degradation of poly (L-Lactide)(PLA), poly (L-Lactide-co-D-Lactide) (PDLA) and their hydroxyapatite (HA) loaded composites (10-50-w/w %) were investigated in simulated body fluid (SBF) at 37 0C and at pH 7.4 by in vitro static testing. Using different techniques, namely weighting to quantify water absorption monitored the hydrolytic degradation and weight loss, scanning electron microscopy (SEM) to observe morphological changes occurred at the surface of the films over time. At the end of the 150 days, only 12.5 wt % and 9.5 wt % of weight PLA1 and PLA2 were lost respectively. Degradation of the copolymers was faster than PLA1 and PLA2 and weight loss data of PDLA1 and PDLA2 were found to be nearly same with 17.5 wt % and 17 wt %, respectively. The changes of pH on all polymer were stable at 7.4, because of simulated body fluid indicates buffer solution properties. Degradation rate of PLA and PDLA composites containing 10 wt % HA decreased, and also water absorption of these samples increased. Weight loss decreased approximately from 12 wt % to 5 wt % and water absorption increased from 10 wt % to 13 wt % for PLA composites containing 10 wt % HA. The change of microstructural properties of obtained composites has been determined in simulated body fluid as a function of time. It was found that the surface of polymer composite films was coated with the calcium phosphate layer. This coating was increased with HA loading and ageing time.Master Thesis Polyropylene - natural zeolite composite films(01. Izmir Institute of Technology, 1999) Özmıhçı, Filiz; Balköse, DevrimIn this project, preparation and characterization of polypropylene natural zeolite composites were studied. Three different series of preparation methods were performed, hot press, microscope slide, and extrusion. The composites are ranged between 0-10 wt%, 0-50 wt%, and 0-6 wt% zeolites, for hot press, microscope slide, and extrusion respectively.Polymer matrix composites are materials which contain polymers as matrix materials surrounding very small reinforcing fibers or fillers. Polymeric composites have great potential from a manufacturing standpoint and show advantages. Such as they are inexpensive, derive from natural sources, present lower density than mineral fillers, and increases the mechanical properties of the final product.In this research polypropylene was used as a matrix material and natural zeolite as a filler. Natural zeolite particles were modified with polyethylene glycol to break agglomerates and make a homogenous dispersion of natural zeolite in polypropylene matrix. These composites were characterized by using differential scanning calorimetry, thermal gravimetric analyzer, infrared spectrophotometer, optical microscopy, mechanical testing and by density measurement device. It has been found that, branched shaped air pockets existed in hot pressed and extruded composites. This causes low mechanical strength, and the densities of these films also indicate the presence of voids in the composite.Master Thesis Mechanical and Thermal Properties of Non-Crimp Glass Fiber Reinforced Composites With Silicate Nanoparticule Modified Epoxy Matrix(Izmir Institute of Technology, 2006) Bozkurt, Emrah; Tanoğlu, MetinIn the present study, epoxy based nanocomposites were prepared with modified and unmodified silicate nanoparticules to apply as a matrix resin for non-crimp glass fiber reinforced polymer composites. The effects of the silicate nanoparticules on the mechanical, thermal and flame retardancy properties of glass reinforced composites were investigated. Laminates were manufactured with hand lay-up technique and cured under compression. To intercalate the layers and obtain better dispersion of silicate layers within the matrix, silicate (montmorillonite, MMT) particules were treated with hexadecyltrimethylammonium chloride (HTAC) surfactants. X-ray diffraction of silicates with and without surface treatment indicated that intergallery spacing of layered silicate increased with surface treatment. Tensile tests showed that silicate loading had minor effect on the tensile strength and modulus of the composite laminates. Flexural properties of laminates were improved with the addition of silicate due to the improved interface between glass fibers and epoxy matrix. With the addition of modified MMT (OMMT), interlaminar shear strength (ILSS) of laminates decreased slightly but fracture toughness (KIC) of laminates were increased. The fracture surfaces were examined with scanning electron microscopy (SEM) and the results revealed that fracture mechanisms were altered due to the presence of silicates in the matrix. Differential scanning calorimetry (DSC) results showed that modified silicate particules increase the glass transition temperatures (Tg) of composite laminates. Incorporation of OMMT particules increased the dynamic mechanical properties of non-crimp glass fiber reinforced epoxy composites. It was found that the flame resistance of composites was improved due to silicate particule additions into the epoxy matrix.