Master Degree / Yüksek Lisans Tezleri
Permanent URI for this collectionhttps://hdl.handle.net/11147/3008
Browse
2 results
Search Results
Now showing 1 - 2 of 2
Master Thesis Recovery of Lithium From Aqueous System Using Manganese Oxide Adsorbent With Developed Electrospun Mat Substrate(01. Izmir Institute of Technology, 2023) Akgün, Berk; Ebil, Özgenç; Demir, Mustafa MuammerLithium is used in many fields due to its high energy density and unique electrochemical properties. Recently, there has been a strong increase in demand for lithium, so the extraction of lithium from natural water resources has become a remarkable research topic. One of the most effective methods of separating lithium from natural water sources is adsorption using lithium ion-sieve adsorbents. However, the powdered nature of the adsorbents makes them challenging to process and less recyclable. Recent studies have focused on developing adsorbents using different polymeric materials as substrates or binders. In the thesis, as a new approach, flexible and free-standing polyurethane electrospun mat substrates were produced and combined with λ-MnO2 to extract lithium from aqueous systems, and their lithium removal performance was investigated. After the fabricated mats and λ-MnO2 powder were characterized, the deposition process was performed, and filtration studies were carried out in synthetic lithium solution. Optimum conditions for lithium removal were found as an adsorbent amount of 200 mg, and 200 ppm initial [Li+], and pH 12. In addition, lithium removal performances have been improved by stacking mats and multi-stage filtration processes. Lithium removal reached 76.6% when a 400 ppm lithium solution and an 8-step filtration were used. Lithium removal experiments were performed with salt-lake brine containing high concentrations of various ions and showed that these ions reduced the lithium removal. In the study, PU electrospun mats for λ-MnO2 powder were found to be a promising substrate for lithium removal from aqueous systems.Master Thesis Fabrication of Transparent Polymer Nanocomposites Containing Pmma-Grafted Ceo2 Particles(Izmir Institute of Technology, 2011) Parlak, Onur; Demir, Mustafa MuammerThe composite materials prepared by transparent polymer and nanosized particles possess promising future in optical design and applications since their controllable optical properties. In this study, transparent/translucent composite films based on polystyrene (PS) and poly(methyl methacrylate) (PMMA)-grafted CeO2 nanoparticles were prepared. CeO2 nanoparticles were precipitated from Ce(NO3)3·6H2O and urea in dimethyl formamide at 120°C. The surface of the nanoparticles was modified with a polymerizable surfactant, 3-methacyloxypropyltrimethoxy silane (MPS) in situ at 0°C. The size of the particles was fixed to 18 nm in diameter. The particles were dispersed into a mixture of MMA:toluene solution. The free radical solution polymerization was carried out in situ at 60°C using benzoyl peroxide (BPO) as initiator. A PMMA layer is formed around CeO2 nanoparticles. The thickness of the shell ranged from 9 to 84 nm was controlled by the amount of BPO using 6 and 0.5 wt %, respectively with respect to monomer. The layer thickness was found to be inversely proportional with the amount of initiator. The resulting PMMA-grafted CeO2 particles were blended with PS in tetrahydrofuran and the solution was spin-coat on a glass slide. CeO2 content in the composite films was fixed to 5.5 wt %. The transmission of the films was examined by UV-vis spectroscopy. The transmission of the PS composite prepared by neat CeO2 particles was 71 %. It was increased to 85 % when the composite prepared with PMMA-grafted CeO2 particles whose PMMA thickness is 9 nm. We believe that the achievement in transparency is most probably due to the reduction in refractive index mismatch between CeO2 particles and PS matrix using PMMA layer at interface.