Mathematics / Matematik
Permanent URI for this collectionhttps://hdl.handle.net/11147/8
Browse
20 results
Search Results
Article Citation - WoS: 9Citation - Scopus: 8A Numerical Method Based on Legendre Wavelet and Quasilinearization Technique for Fractional Lane-Emden Type Equations(Springer, 2023) İdiz, Fatih; Tanoğlu, Gamze; Aghazadeh, NasserIn this research, we study the numerical solution of fractional Lane-Emden type equations, which emerge mainly in astrophysics applications. We propose a numerical approach making use of Legendre wavelets and the quasilinearization technique. The nonlinear term in fractional Lane-Emden type equations is iteratively linearized using the quasilinearization technique. The linearized equations are then solved using the Legendre wavelet collocation method. The proposed method is quite effective to overcome the singularity in fractional Lane-Emden type equations. Convergence and error analysis of the proposed method are given. We solve some test problems to compare the effectiveness of the proposed method with some other numerical methods in the literature.Article Citation - WoS: 4Citation - Scopus: 4A New Numerical Algorithm Based on Quintic B-Spline and Adaptive Time Integrator for Cou- Pled Burger's Equation(Tabriz University, 2023) Çiçek, Yeşim; Gücüyenen Kaymak, Nurcan; Bahar, Ersin; Gürarslan, Gürhan; Tanoğlu, GamzeIn this article, the coupled Burger's equation which is one of the known systems of the nonlinear parabolic partial differential equations is studied. The method presented here is based on a combination of the quintic B-spline and a high order time integration scheme known as adaptive Runge-Kutta method. First of all, the application of the new algorithm on the coupled Burger's equation is presented. Then, the convergence of the algorithm is studied in a theorem. Finally, to test the efficiency of the new method, coupled Burger's equations in literature are studied. We observed that the presented method has better accuracy and efficiency compared to the other methods in the literature. © 2023 University of Tabriz. All Rights Reserved.Article Citation - WoS: 9Citation - Scopus: 8Taylor Wavelets Collocation Technique for Solving Fractional Nonlinear Singular Pdes(Springer, 2022) Aghazadeh, Nasser; Mohammadi, Amir; Tanoğlu, GamzeA novel technique has been introduced to solve the Emden-Fowler equations. It has been derived from the Taylor wavelets collocation method. The proposed scheme has been successfully implemented in order to solve the singular equations. The singular problem converts to a system of algebraic equations that can be solved numerically. Moreover, the technique is very effective to remove the strong singularity point at x = 0. The numerical experiments have been checked out with the exact and approximate solutions that have been achieved by others including the Adomian decomposition method (Wazwaz in Appl Math Comput 166:638-651, 2005), Modified Homotopy Perturbation Method (Singh et al. J Math Chem 54(4):918-931, 2016). Also, the error analysis of the technique has been considered.Article A Reliable and Fast Mesh-Free Solver for the Telegraph Equation(Springer, 2022) İmamoğlu Karabaş, Neslişah; Korkut, Sıla Övgü; Gürarslan, Gürhan; Tanoğlu, GamzeIn the presented study, the hyperbolic telegraph equation is taken as the focus point. To solve such an equation, an accurate, reliable, and efficient method has been proposed. The developed method is mainly based on the combination of a kind of mesh-free method and an adaptive method. Multiquadric radial basis function mesh-free method is considered on spatial domain and the adaptive fifth-order Runge–Kutta method is used on time domain. The validity and the performance of the proposed method have been checked on several test problems. The approximate solutions are compared with the exact solution, it is shown that the proposed method has more preferable to the other methods in the literature.Article Citation - WoS: 1Citation - Scopus: 1Fatigue Life Prediction and Optimization of Gfrp Composites Based on Failure Tensor Polynomial in Fatigue Model With Exponential Fitting Approach(SAGE Publications, 2022) Güneş, Mehmet Deniz; İmamoğlu Karabaş, Neslişah; Deveci, Hamza Arda; Tanoğlu, Gamze; Tanoğlu, MetinIn this study, a new fatigue life prediction and optimization strategy utilizing the Failure Tensor Polynomial in Fatigue (FTPF) model with exponential fitting and numerical bisection method for fiber reinforced polymer composites has been proposed. Within the experimental stage, glass/epoxy composite laminates with (Formula presented.), (Formula presented.), and (Formula presented.) lay-up configurations were fabricated, quasi-static and fatigue mechanical behavior of GFRP composites was characterized to be used in the FTPF model. The prediction capability of the FTPF model was tested based on the experimental data obtained for multidirectional laminates of various composite materials. Fatigue life prediction results of the glass/epoxy laminates were found to be better as compared to those for the linear fitting predictions. The results also indicated that the approach with exponential fitting provides better fatigue life predictions as compared to those obtained by linear fitting, especially for glass/epoxy laminates. Moreover, an optimization study using the proposed methodology for fatigue life advancement of the glass/epoxy laminates was performed by a powerful hybrid algorithm, PSA/GPSA. So, two optimization scenarios including various loading configurations were considered. The optimization results exhibited that the optimized stacking sequences having maximized fatigue life can be obtained in various loading cases. It was also revealed that the tension-compression loading and the loadings involving shear loads are critical for fatigue, and further improvement in fatigue life may be achieved by designing only symmetric lay-ups instead of symmetric-balanced and diversification of fiber angles to be used in the optimization.Article Citation - WoS: 10Citation - Scopus: 12An Efficient Approach for Solving Nonlinear Multidimensional Schrodinger Equations(Elsevier, 2021) İmamoğlu Karabaş, Neslişah; Korkut, Sıla Övgü; Tanoğlu, Gamze; Aziz, Imran; Siraj-ul-IslamAn efficient numerical method is proposed for the solution of the nonlinear cubic Schrodinger equation. The proposed method is based on the Frechet derivative and the meshless method with radial basis functions. An important characteristic of the method is that it can be extended from one-dimensional problems to multi-dimensional ones easily. By using the Frechet derivative and Newton-Raphson technique, the nonlinear equation is converted into a set of linear algebraic equations which are solved iteratively. Numerical examples reveal that the proposed method is efficient and reliable with respect to the accuracy and stability.Article An Operator Splitting Approximation Combined With the Supg Method for Transport Equations With Nonlinear Reaction Term(Tech Science Press, 2012) Baysal, Onur; Tanoğlu, GamzeIn this work, an operator splitting method is proposed in order to obtain a stable numerical solution for transport equation with non-linear reaction term. We split the transport equation into a reaction part and an advection diffusion part. The former one which becomes a nonlinear ordinary differential equation can be approximated by the simple higher order integrator or solved exactly. The later one is approximated by the Streamline-Upwind Petrov-Galerkin (SUPG) method combined with the generalized Euler time integration (q-method). Numerical results that illustrate the good performance of this method are reported.Article Citation - Scopus: 2A Conserved Linearization Approach for Solving Nonlinear Oscillation Problems(Natural Sciences Publishing, 2018) Korkut, Sıla Övgü; Gücüyenen Kaymak, Nurcan; Tanoğlu, GamzeNonlinear oscillation problems are extensively used in engineering and applied sciences. Due to non-availability of the analytic solutions, numerical approaches have been used for these equations. In this study, a numerical method which is based on Newton-Raphson linearization and Fréchet derivative is suggested. The convergence analysis is also studied locally. The present method is tested on three examples: damped oscillator, Van-der Pol equation and Schrödinger equation. It is shown that the obtained solutions via the present method are more accurate than those of the well-known second order Runge-Kutta method. When examining the present method, preservation of characteristic properties of these equations is also considered. The obtained results show that the present method is applicable with respect to the efficiency and the physical compatibility.Article Citation - WoS: 3Citation - Scopus: 3A1-L10 Phase Boundaries and Anisotropy Via Multiple-Order Theory for an Fcc Alloy(European Mathematical Society Publishing House, 2003) Tanoğlu, Gamze; Braun, Richard J.; Cahn, John W.; McFadden, Geoffrey B.The dependence of thermodynamic properties of planar interphase boundaries (IPBs) and antiphase boundaries (APBs) in a binary alloy on an fcc lattice is studied as a function of their orientation. Using a recently developed diffuse interface model based on three non-conserved order parameters and the concentration, and a free energy density that gives a realistic phase diagram with one disordered phase (A1) and two ordered phases (L12 and L10) such as occur in the Cu-Au system, we are able to find IPBs and APBs between any pair of phases and domains, and for all orientations. The model includes bulk and gradient terms in a free energy functional, and assumes that there is no mismatch in the lattice parameters for the disordered and ordered phases.We catalog the appropriate boundary conditions for all IPBs and APBs. We then focus on the IPB between the disordered A1 phase and the L10 ordered phase. For this IPB we compute the numerical solution of the boundary value problem to find its interfacial energy, γ as a function of orientation, temperature, and chemical potential (or composition). We determine the equilibrium shape for a precipitate of one phase within the other using the Cahn-Hoffman "-vector" formalism. We find that the profile of the interface is determined only by one conserved and one non-conserved order parameter, which leads to a surface energy which, as a function of orientation, is "transversely isotropic" with respect to the tetragonal axis of the L10 phase. We verify the model's consistency with the Gibbs adsorption equation.Article Citation - WoS: 5Citation - Scopus: 5Convergence Analysis and Numerical Solution of the Benjamin-Bona Equation by Lie-Trotter Splitting(TUBITAK, 2018) Zürnacı, Fatma; Gücüyenen Kaymak, Nurcan; Seydaoğlu, Muaz; Tanoğlu, GamzeIn this paper, an operator splitting method is used to analyze nonlinear Benjamin-Bona-Mahony-type equations. We split the equation into an unbounded linear part and a bounded nonlinear part and then Lie-Trotter splitting is applied to the equation. The local error bounds are obtained by using the approach based on the differential theory of operators in a Banach space and the quadrature error estimates via Lie commutator bounds. The global error estimate is obtained via Lady Windermere's fan argument. Finally, to confirm the expected convergence order, numerical examples are studied.