Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
20 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 2Assessing the Spatial and Temporal Characteristics of Meteorological Drought in Afghanistan(Birkhauser, 2025) Tayfur, G.; Hayat, E.; Safari, M.J.S.Afghanistan is suffering from periodic events of drought, which has exacerbated in recent years due to extreme climate events in the region. Having an arid to semi-arid climate, the country faces significant challenges of water resources management, especially for irrigation as reliance on agriculture is cumbersome. This study is undertaken to characterize historical meteorological drought in Afghanistan to provide an insight on where and when meteorological drought events happened in different River Basins (RBs). The study mainly employs the gamma-Standardized Precipitation Index (gamma-SPI) to analyze historical meteorological droughts across Afghanistan from 1979 to 2019. Monthly precipitation data is obtained from the Ministry of Energy and Water (MEW) of Afghanistan, which is a combination of observed data from ground stations and gap-filled data by the MEW for the study period. Gridded gamma-SPI values are interpolated and mapped to visualize patterns of spatial drought across the entire country. The results indicate that countrywide extreme drought events occurred in 1999, 2000, 2001, 2010, 2016, 2017, and 2019, particularly affecting southern, western, and southwestern regions. Decreasing rainfall occurred in all five RBs, with the most considerable decline observed in the 1999–2008 period. The study reveals the increasing frequency and severity of meteorological droughts in Afghanistan. It also emphasizes on the vulnerability of agriculture and water sectors due to the drought events. The findings of the study suggest the need for better drought monitoring, preparedness, awareness, and adaptation of strategies to ensure water security and agricultural sustainability in the face of climate change. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2024.Article Citation - WoS: 7Citation - Scopus: 5Meteorological Drought and Trend Effects on Transboundary River Basins in Afghanistan(Springer, 2023) Hayat, Ehsanullah; Tayfur, GökmenAfghanistan, as a landlocked country located within central and southwestern Asia, has an arid to semi-arid climate. Most of the people are involved in agricultural activities, and a major part of the country's gross domestic product depends on agriculture, but the country has the lowest water storage capacity. Consecutive periods of drought and rapid snowmelt due to climate change have made it more challenging for suitable water resource management practices. This study investigates the historical meteorological drought characteristics across the whole country by employing the Reconnaissance Drought Index for the period 1979-2019 using data from 55 meteorological stations. Trends in precipitation and temperature are also investigated using the Mann-Kendall's and the Sen's slope statistical tests. A four-decadal countrywide drought map is generated. Extreme and severe droughts were observed in 1999 and 2000 across the whole country. Moderate drought events have started to occur with a frequency of 3 to 5 years since 1999. The decadal annual rainfall values in each river basin indicate that rainfall has decreased in the last two decades with a significant decline in 1999-2008. The trends of increase in temperature and decrease in precipitation are indications of rapid climate change in the country, especially in the south, west, and southwest regions. Due to the intensity and frequency of the droughts, river flow rates have decreased; and therefore, there is a need for the upstream and downstream neighboring countries to come to terms with the phenomenon of a new normal in the hydrological cycle and accordingly revise new water sharing treaties.Article Modeling Plasticity and Damage in Fiber Reinforced Composites by a Crystal Plasticity Based Approach(Elsevier, 2023) Dizman, E. Aybars; Özdemir, IzzetIn very thin ply laminates, delamination failure initiation occurs at much higher stress levels as compared to conventional ply laminates. This results in significant plastic deformation in the matrix accompanied by large fiber rotations. A closer look reveals that microstructure of fiber reinforced composites at large strains do not rotate with the plastic spin induced by the total deformation gradient and therefore inelasticity of such materials requires dedicated constitutive models. This paper focuses on inelastic response of such composites by using a recently proposed crystal plasticity based modeling framework and extents it by a non-local continuum damage mechanics formulation. As opposed to existing works related to composites, adapted crystal plasticity model is formulated and implemented in an implicit manner. To address the initiation and evolution of damage observed at large strains, localizing implicit gradient damage (LIGD) framework is used to degrade the slip resistance and hardening mechanisms on longitudinal and transverse slip systems by means of two separate damage variables. A user element (UEL) subroutine encapsulating all the components of the model is developed and integrated within the commercial finite element solver Abaqus. Capabilities of the model are assessed at material point, ply, and component levels by comparisons with analytical solutions and selected experimental results from the literature.Article Citation - WoS: 9Citation - Scopus: 13Analysis of Adhesively Bonded Joints of Laser Surface Treated Composite Primary Components of Aircraft Structures(Elsevier, 2023) Martin, Seçkin; Nuhoğlu, Kaan; Aktaş, Engin; Tanoğlu, Metin; İplikçi, Hande; Barışık, Murat; Yeke, Melisa; Türkdoğan, Ceren; Esenoğlu, Gözde; Dehneliler, SerkanThe performance of the adhesively bonded aerospace structures highly depends on the adhesion strength between the adhesive and adherents, which is affected by, in particular, the condition of the bonding surface. Among the various surface treatment methods, as state of the art, laser surface treatment is a suitable option for the CFRP composite structures to enhance the adhesion performance, adjusting the roughness and surface free energy with relatively minimizing the damage to the fibers. The aim of this study is the validation and evaluation of the adhesive bonding behavior of the laser surface-treated CFRP composite structures, using the finite element technique to perform a conservative prediction of the failure load and damage growth. Such objectives were achieved by executing both experimental and numerical analyses of the secondary bonded CFRP parts using a structural adhesive. In this regard, to complement physical experiments by means of numerical simulation, macro-scale 3D FEA of adhesively bonded Single Lap Joint and Skin-Spar Joint specimens has been developed employing the Cohesive Zone Model (CZM) technique in order to simulate bonding behavior in composite structures especially skin-spar relation in the aircraft wing-box.Article Citation - WoS: 15Citation - Scopus: 17Effects of Nanosecond Laser Ablation Parameters on Surface Modification of Carbon Fiber Reinforced Polymer Composites(SAGE Publications, 2023) Martin, Seçkin; İplikçi, Hande; Barışık, Murat; Türkdoğan, Ceren; Yeke, Melisa; Nuhoğlu, Kaan; Esenoğlu, Gözde; Tanoğlu, Metin; Aktaş, Engin; Dehneliler, Serkan; İriş, Mehmet ErdemRemoval of contaminants and top polymer layer from the surface of carbon-fiber-reinforced polymer (CFRP) composites is critical for high-quality adhesive-joining with direct bonding to the reinforcing fiber constituents. Surface treatment with a laser beam provides selective removal of the polymer matrix without damaging the fibers and increasing the wettability. However, inhomogeneous thermal properties of CFRP make control of laser ablation difficult as the laser energy absorbed by the carbon fibers is converted into heat and transmitted through the fiber structures during the laser operation. In this study, the effect of scanning speed and laser power on nanosecond laser surface treatment was characterized by scanning electron microscope images and wetting angle measurements. Low scanning speeds allowed laser energy to be conducted as thermal energy through the fibers, which resulted in less epoxy matrix removal and substantial thermal damage. Low laser power partially degraded the epoxy the surface while the high power damaged the carbon fibers. For the studied CFRP specimens consisting of unidirectional [45/0/?45/90]2s stacking of carbon/epoxy prepregs (HexPly®-M91), 100 mJ/mm2 generated by 10 m/s scanning speed and 30 W power appeared as optimum processing parameters for the complete removal of epoxy matrix from the top surface with mostly undamaged carbon fibers and super hydrophilic surface condition. © The Author(s) 2023.Article Citation - Scopus: 1Relationship Between Abrasion, Fragmentation and Thermal Weathering Resistance of Aggregates: Regression and Artificial Neural Network Analyses(Springer, 2023) Gökalp, İslam; Kaya, Orhan; Uz, Volkan EmreFor being used in pavement construction, properties of aggregates must satisfy the minimum requirements specified by highway agencies or institutions. The properties of the aggregates are determined by many tests lasting anywhere between a couple of hours to a few weeks depending on the type of the test. If good correlations can be established between the tests taking longer time and the ones taking comparably shorter time, there might be no need to conduct these longer time-taking tests for the sake of time. The aim of this study is to investigate the relationships between abrasion, fragmentation, and thermal weathering resistances of different aggregate types. To accomplish this aim, aggregates with different origins (natural and slags) were tested and correlative analyses utilizing regression analysis and artificial neural network (ANN) models were performed to establish relationships between the results of these test methods. It was found that good correlations can be established especially with ANN models and significant amount of time and effort can be saved with these developed models. © 2023, The Author(s), under exclusive licence to Chinese Society of Pavement Engineering.Article Citation - WoS: 4Citation - Scopus: 53d Modelling of Surface Spreading and Underground Dam Groundwater Recharge: Egri Creek Subbasin, Turkey(Springer, 2023) Şahin, Yavuz; Tayfur, GökmenThis study investigated surface spreading and underground dam recharge methods to replenish groundwater in Turkey's Egri Creek Sub-basin of the Kucuk Menderes River Basin. A three-dimensional numerical model was employed for this purpose. Field and lab data are provided to the model for realistic simulations. Pumping test results were used to determine the aquifer parameters. The laboratory works involved sieve analysis, permeability tests, and porosity and water content prediction. The numerical model's boundary conditions were determined from the geological and hydrogeological characteristics of the study area. Initial conditions were expressed regarding water content and pressure head in the vadose zone. The numerical model was satisfactorily validated by simulating water levels in three different pumping wells in the study area. Seven different scenarios, each having a different pool size, were investigated for the surface spreading recharge method. The results showed that a pool size of 30 x 30 m with a 6-m depth basin was the most optimal choice, raising the groundwater level to about 29.3 m. On the other hand, it was found that an underground dam could raise the levels by an average of 9.5 m, which might not be significant to warrant the construction.Article Citation - WoS: 8Citation - Scopus: 8Improving Adhesive Behavior of Fiber Reinforced Composites by Incorporating Electrospun Polyamide-6,6 Nanofibers in Joining Region(SAGE Publications, 2022) Esenoğlu, Gözde; Barışık, Murat; Tanoğlu, Metin; Yeke, Melisa; Türkdoğan, Ceren; İplikçi, Hande; Martin, Seçkin; Nuhoğlu, Kaan; Aktaş, Engin; Dehneliler, Serkan; İriş, Mehmet ErdemAdhesive joining of fiber reinforced polymer (CFRP) composite components is demanded in various industrial applications. However, the joining locations frequently suffer from adhesive bond failure between adhesive and adherent. The aim of the present study is improving bonding behavior of adhesive joints by electrospun nanofiber coatings on the prepreg surfaces that have been used for composite manufacturing. Secondary bonding of woven and unidirectional CFRP parts was selected since this configuration is preferred commonly in aerospace practices. The optimum nanofiber coating with a low average fiber diameter and areal weight density is succeed by studying various solution concentrations and spinning durations of the polyamide-6.6 (PA 66) electrospinning. We obtained homogeneous and beadles nanofiber productions. As a result, an average diameter of 36.50 +/- 12 nm electrospun nanofibers were obtained and coated onto the prepreg surfaces. Prepreg systems with/without PA 66 nanofibers were hot pressed to fabricate the CFRP composite laminates. The single-lap shear test coupons were prepared from the fabricated laminates to examine the effects of PA 66 nanofibers on the mechanical properties of the joint region of the composites. The single-lap shear test results showed that the bonding strength is improved by about 40% with minimal adhesive use due to the presence of the electrospun nanofibers within the joint region. The optical and SEM images of fractured surfaces showed that nanofiber-coated joints exhibited a coherent failure while the bare surfaces underwent adhesive failure. The PA66 nanofibers created better coupling between the adhesive and the composite surface by increasing the surface area and roughness. As a result, electrospun nanofibers turned adhesive failure into cohesive and enhanced the adhesion performance composite joints substantially.Article Citation - WoS: 4Citation - Scopus: 4Seismic Vulnerability Assessment of an Unanchored Circular Storage Tank Against Elephant's Foot Buckling(Springer, 2022) Bektaş, Nurullah; Aktaş, EnginPurpose Seismic vulnerability assessment of liquid containing storage tanks is the most vital relevance for industrial plants and society safety to endure damage during impending earthquakes. Because such systems also play an essential role in the public lifeline and also ensure continued use in emergencies. Furthermore, considering that the material contained in individual plants could be hazardous, requisite precautions have paramount importance against undesired leakage. The high internal pressure and axial forces exerted by the liquid in the steel tanks near the tank wall bottom produce elastic-plastic buckling, also known as Elephant's Foot Buckling (EFB). As far as the authors are aware, no study has been carried out that involves a critical assessment and comparison of IDA and truncated IDA-based EFB failure criterion. This study provides insight into incremental dynamic analysis (IDA) and truncated IDA-based seismic evaluation of cylindrical unanchored steel storage tanks by employing a developed pressure-based surrogate modeling approach. For this purpose, probability-based seismic assessment of a representative sample is considered based on IDA and truncated IDA approaches to identify the potential of the EFB failure and to explore potential enhancements in the sophisticated structural analysis model to prevent the hazardous effects of impending earthquakes. Methods Due to the significance of industrial plants for public safety and benefit, the structural response evaluation methods for different types of storage tanks have been widely reported. In the literature, the most comprehensive analytical assessment methodology is the IDA approach, in which nonlinear time-history analyses are considered in the finite element analysis model to assess the structural model's seismic performance. Results To generate fragility curves, both IDA approaches are employed, taking into consideration and ignoring uncertainty of material properties. The values of the two methods-based fragility curves approach each other as the magnitude of dispersion increases. Conclusion The two fragility curves give the probability of failures close to each other as the dispersion amount increases while considering the uncertainty of the material properties. In addition, fragility curves generated based on the truncated IDA have been found to give a higher probability of failure, up to 32.5 percent. When compared to the IDA-based fragility curves, the truncated IDA-based fragility curves were found to be on the conservative side.Article Citation - WoS: 4Citation - Scopus: 10Characterization of Sb Scaling and Fluids in Saline Geothermal Power Plants: a Case Study for Germencik Region (büyük Menderes Graben, Turkey)(Pergamon-Elsevier Science Ltd, 2021) Tonkul, Serhat; Baba, Alper; Demir, Mustafa M.; Regenspurg, SimonaTurkey is located on the seismically active Alpine-Himalayan belt. Although tectonic activity causes seismicity in the Anatolian plate, it also constitutes an important geothermal energy resource. Today, geothermal energy production is heavily concentrated in Turkey's Western Anatolia region. Graben systems in this region are very suitable for geothermal resources. The Buyuk Menderes Graben (BMG) is an area of complex geology with active tectonics and high geothermal potential power. Germencik (Aydin) is located in the BMG, where the geothermal waters include mainly Na-Cl-HCO3 water types. This study examined the stibnite scaling formed in the preheater system of the Germencik Geothermal Field (GGF). The formation of the stibnite scaling on the preheater system dramatically reduces the energy harvesting of the GGF. Considering the stibnite scaling in the surface equipment, the optimum reinjection temperature was determined as 95 degrees C to prevent stibnite scaling in the GGF.