Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
9 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 4Destratification of Thermally Stratified Water Columns by Air Diffusers(Elsevier, 2023) Elçi, Şebnem; Hazar, Oğuz; Bahadıroğlu, Nisa; Karakaya, Derya; Bor, AslıThis study aims at improving the understanding in order to optimise an aeration system for artificial destratification to control cyanobacteria growth in the reservoirs. Previous applications for artificial destratification in reservoirs were based on installations based on computational methods, where neither the effect of air bubble size and configuration nor the effect of air density in the bubble plume could be investigated. This study seeks for an optimized design with the help of experimental and numerical analyses. In order to perform experimental studies, a novel water tank enabling the heating/cooling of the water column as desired and a diffuser system were manufactured. During the experimental studies, effect of bubble size, bubble slip velocity, and other parameters of air diffuser on destratification efficiency were investigated. Based on the nondimensional parameters, a new destratification efficiency formula is obtained by the Genetic Algorithm (GA) approach. Additionaly, the hydrodynamics of the water tank during the mixing process by air diffuser was simulated via 3D numerical model and validated with experimental results. The Eulerian multiphase model with the ‘degassing’ boundary condition and k-ω turbulence model are found to be suitable for the purposes of the study. Based on the error analysis of comparisons of the model and observations, the best configuration of air diffuser is proposed, and the numerical model is found to be successful in simulating the destratification of thermally stratified water columns by air diffuser.Article Citation - WoS: 3Citation - Scopus: 4Geothermal Potential of Manuguru Geothermal Field of Godavari Valley, India(Elsevier, 2022) Singh, Hemant K.; Chandrasekharam, Dornadula; Minissale, A.; Raju, N. Janardhana; Baba, AlperThe Godavari geothermal field in India is one of the potential areas manifested by several geothermal waters and groundwaters. The geothermal waters of the area are near neutral (pH: 6.5–7.3) with surface temperature ranging from 30 to 55 °C while groundwaters are also near neutral (pH: 6.6–7.5) with surface temperature ranging from 24 to 28 °C. The hydrogeochemistry of the geothermal waters suggests that the geothermal waters show a Na-Ca-SO4-HCO3 to a Ca-HCO3 type and groundwaters are of the Ca-HCO3 to Na-Ca-HCO3 type while groundwaters and river waters are of the Ca-Na-SO4 types. The geothermal waters of the study area are enriched in SO42– and Cl–, due to the interaction with the pyrite-bearing Gondwana sediments and granitic gneiss basement rocks. Furthermore, enrichment of Ca2+, Mg2+ and an increased HCO3/Cl ratio in geothermal water is caused by the exchange and/or mixing process that takes place during water-rock interaction at an elevated temperature while ascending to the surface. This type of behavior of water is also observed during the water-rock interaction experiment at 100 °C. Studies on geothermal gas geochemistry suggest the deeper circulation of geothermal waters in the crust and high helium concentration as a thermal gas that can be utilized for commercial purposes. Estimated reservoir temperatures from quartz and Na-K-Ca geothermometry are in the range 110–195 °C. Therefore, the geothermal water of the study area is categorized as a moderate enthalpy geothermal system. Thermal logging in the borewell and depth range from 50 to 1000 m suggest that the geothermal gradient in the Manuguru area ranges from 22.5 to 105.5 °C/km and heat flow ranges from 83 to 388 mW/m2, which is higher than the regional condition. Therefore, 3584 MWe power can be produced by using the Organic Rankine Cycle (ORC) from the Manuguru geothermal area of Godavari valleyArticle Citation - WoS: 1Citation - Scopus: 1Comparison of the Predicted and the Observed Wave Spectral Parameters During the Storms at Filyos Coasts, the Southwestern Black Sea(Elsevier, 2022) Öztunalı Özbahçeci, Bergüzar; Güler, MuzafferIn-situ wave measurement data are mainly used to validate the bulk wave parameters predicted by numerical models. Although the frequently used third-generation wave models are spectral models, determination of various spectral parameters and validation with the observed data are not common. This study covers the spectral analysis of selected storm records of a nearshore wave measurement campaign carried out at Filyos coasts with the complex bottom topography in Turkey, Southwestern Black Sea. The bulk wave and the spectral parameters are also calculated by a third-generation nearshore wave model, SWAN (Simulating Waves Nearshore), forced by the ERA5 offshore wave data, which is the newest re-analysis of the European Centre for Medium-Range Weather Forecasts (ECMWF) for the selected storms. Before using ERA5 offshore wave data, they are calibrated by the wave data of the satellite radar altimeter. In-situ measured bathymetry data are used in the SWAN model. Observed and predicted bulk wave and spectral parameters are compared, and the statistical error measures are calculated not only for the significant wave height, the peak period, and the peak wave direction but also for the three different spectral periods, three different frequency width parameters, a directional width and, a spectral peakedness parameter for the first time. Low values of statistical error measures show that the current wave predictions have a good agreement with the observed ones in terms of the significant wave height, Hs, and the peak period, Tp. However, the SWAN model predicts a slightly narrower frequency and directional spectrum with higher peaks, although the error measures are low. Moreover, SWAN can not predict the wide range of spectral shape occurrences that the observed spectra have. The development of the various spectral parameters during the storms is also investigated for the first time. It is found that the frequency and directional spreading of the observed spectra become wider and unsharpened in the late stages of the storm compared to the early stages. However, the same tendency is not observed clearly in the predicted directional spreadingArticle Citation - WoS: 24Citation - Scopus: 27Drought Assessment in the Aegean Region of Turkey(Springer, 2022) Mersin, Denizhan; Gülmez, Ayşe; Safari, Mir Jafar Sadegh; Vaheddoost, Babak; Tayfur, GökmenDrought indices are commonly used to monitor the duration and severity of droughts. In this regard, the continuously changing climate regardless of its cause or effect pushes the limit of the water deficit through time and space. Izmir is a raising city in Turkey, which owns various water resources including but not limited to seashores, lakes, river streams, and groundwater aquifers. In this study, the long-term precipitation and temperature records from 14 meteorological stations between 1973 and 2020 (for 47 years) are used to investigate the drought characteristics in Buyuk Menderes, Kucuk Menderes, and Gediz basins located in the Aegean region of Turkey. For this, the Standardized Precipitation Index (SPI) and the Standardized Precipitation Evapotranspiration Index (SPEI), Percent of Normal (PNI), and the so-called Discrepancy Precipitation Index (DPI) are used with consideration to 1-, 3-, 6-, and 12-month moving averages to investigate the drought patterns. Results showed that the monthly indices depict very similar results for the entire region. However, in the 1980s and 2010s droughts were more severe than the rest of the historical records. When the moving average operator is implemented in the analysis (3-, 6- and 12-month periods), neither SPI nor the SPEI showed the same results at any stations. It is illustrated that the periods of severe and normal drought have occurred in the past, yet the indices that are obtained using average values are generally within the normal limits, but extreme values (extremely arid or extremely wet) occurred occasionally. It is also concluded that although there is a similarity between the implemented indices, the DPI and PNI depict the highest resemblance.Article Citation - WoS: 2Citation - Scopus: 3Site Assessment of Surface Texture and Skid Resistance by Varying the Grit Parameters of an Sma(American Society of Civil Engineers (ASCE), 2022) Gökalp, İslam; Uz, Volkan Emre; Saltan, Mehmet; Tepe, MehtapFor the sale operation of vehicles, pavement should provide adequate skid resistance, which can be achieved by using high polishing-resistant aggregate in wearing courses. However, supplying high-quality aggregate is not always feasible due to high transportation costs. For this reason, a method called gritting was adapted to meet the Highway Technical Specification (HTS) of Turkey in 2013. According to the method, for certain parts of the country, the wearing course can be constructed with local aggregates that have minimum polished stone value (PSV) of 40 (PSV >= 40), but, in this case, the surface must be covered with a high polishing-resistant aggregate (PSV >= 50), after the rollers' first pass. The objective of this study was to improve the present gritting method by investigating the effect of grit parameters on pavement performance under real traffic conditions. In this regard, during its construction, the wearing course of 0-51 Highway was gritted with different aggregate types (slags and natural), sizes (1-3; 1-5 mm), spreading amount (1.5; 2; 2.5 kg/m(2)), and spreading time (before and after the first pass of a roller) on eight test sections. Then, the macrotexture and skid resistance performance of these sections were evaluated under real traffic and environmental conditions for longer than 4 years. Changes in surface texture and skid resistance with respect to traffic were determined for each section. The results showed that higher skid resistance values were obtained at the sections gritted with metallurgical slags. Additionally, the sections gritted with 1-5 mm aggregates had better skid resistance than those gritted with 1-3 mm, while the change in mean texture depths were not very significant.Article Citation - WoS: 2Citation - Scopus: 5Experimental Modeling of Antimony Sulfides-Rich Geothermal Deposits and Their Solubility in the Presence of Polymeric Antiscalants(Elsevier, 2022) Karaburun, Emre; Sözen, Yiğit; Çiftçi, Celal; Şahin, Hasan; Baba, Alper; Akbey, Ümit; Yeşilnacar, Mehmet İrfan; Erdim, Eray; Regenspurg, Simona; Demir, Mustafa MuammerAntimony (Sb)-rich geothermal deposits have been observed in many geothermal power plants worldwide. They occur as red-colored, sulfidic precipitates disturbing energy-harvesting by clogging the geothermal installations. In order to prevent the formation of this scale, information on its physicochemical features is needed. For this purpose, Sb-rich sulfide-based deposits were synthesized at controlled conditions in a pressurized glass reactor at geothermal conditions (135 °C and 3.5 bar). Various polymeric antiscalants with different functional groups, such as acrylic acid, sulphonic acid, and phosphonic acid groups were tested for their effect on Sb sulfide solubility. An additional computational study was performed to determine the binding energy of Sb and S atoms to these groups. The results suggest that sulfonic acid groups are the most affective. Therefore, it was concluded that these macromolecule containing sulfonic acid groups and poly (vinyl sulfonic acid) derivatives could potentially act as antiscalants for the formation of antimony sulfide.Article Citation - WoS: 1Citation - Scopus: 1A Magnetically Driven Elastic Rod Type Bi-Directional Swimmer at Stokes Flow(Springer, 2022) Özdemir, İzzetIn this paper, a flexible rod type micro-swimmer is proposed which achieves swimming direction reversal on the fly by forming a chiral helix-like geometry through external magnetic excitation. Furthermore an accompanying low Reynolds number flow-structure interaction analysis framework is developed which effectively combines a geometrically non-linear shear deformable beam model with regularized Stokeslet method in a monolithic implicit solution algorithm. This framework is used to investigate the basic characteristics of the proposed micro-swimmer in terms of dimensionless groups reflecting the interplay between different forces involved.Article Citation - WoS: 10Citation - Scopus: 12Impacts of Construction of Dam on the Flow Regimes and Water Quality: a Case Study From Turkey(Springer, 2022) Bor, Aslı; Elçi, ŞebnemDam construction has important positive and negative effects on the environment, including physical changes of the riverbed morphology, changes in sediment transport patterns and water quality, and the river ecosystem in general. The primary objective of this study is to present a methodology to assess the impacts of construction and operation of Çine Dam, in Aydin, Turkey, on the river flow regimes, sedimentation, and water quality of the downstream reach of Büyük Menderes River. Construction of the dam significantly reduced the sediment load from the Çine tributary to the main reach, as expected. To evaluate changes in the water quality of the Çine River, five different water quality index methods are compared before and after the dam operation: Weighted Arithmetic Index (WAI-WQI), Canadian Council of Ministers of the Environment Water Quality Index (CCME-WQI), Universal Water Quality Index (UWQI), Oregon Water Quality Index (OWQI) and Aquatic Toxicity Index (ATI). ATI and CCME-WQI methods are found to be more appropriate for the 10-year water quality assessment of the river.Article Citation - WoS: 3Citation - Scopus: 3A Quality Assessment of Public Water Fountains and Relation To Human Health: a Case Study From Yozgat, Turkey(John Wiley and Sons Inc., 2019) İritaş, Servet Birgin; Türksoy, Vugar Ali; Deniz, Serdar; Koçoğlu, Serhat; Kırat, Güllü; Demirkesen, Ali Can; Baba, AlperPublic fountains are very common and everyday people appreciate the benefits a water fountain can bring. However, consumption of public fountain water in some country has decreased because of growing concerns that constituents in fountain water may have adverse effects on health. A few studies have examined the safety of public fountains, proposing only limited evidence of fountain-related health issues in Turkey. Most of these public fountains are sourced from natural springs in Turkey. In this study, a 177 fountain water and 32 rock samples were analysed for source and quality of water. The geology of the region has the direct impact on the quality of the public fountain water. The results indicate that the level of some elements exceeded the limit values determined by WHO and US.EPA. The most striking high values were observed for iron (Fe), nickel (Ni), aluminum (Al), arsenic (As) and bromine (Br) concentrations.