Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
2 results
Search Results
Conference Object Citation - Scopus: 1Stiffness and Strength of Shear Diaphragms Used for Stability Bracing of Slender Beams(Curran Associates, 2014) Eğilmez, Oğuz Özgür; Akbaba, Andaç; Vardaroğlu, MustafaLight gage metal decking is often used in structures as concrete deck formwork, roof cladding or siding. In the steel building and bridge industries, decking acts like a shear diaphragm and provides continuous lateral bracing to the top flange of non-composite beams and girders that they are attached to. The building industry has long relied on the in-plane stiffness and strength of metal decking to brace steel beams during construction. Although the current AASHTO LRFD specifications do not allow bridge deck forms to be relied upon as a bracing source for steel bridge I-girders, recent studies have demonstrated that deck forms can significantly increase the buckling capacity of bridge girders by providing a relatively simple modification to the connection. Shear diaphragm bracing of steel I-beams have been studied in the past. These studies mainly focused on beams with stocky webs. The purpose of the study outlined in this paper is to enhance the understanding of both the stiffness and strength of shear diaphragms used to brace slender steel I-beams. The parameters that are investigated include diaphragm stiffness, sheet thickness, number of side-lap fasteners, flange width, and web slenderness ratio. Beams with web slenderness ratios of 100 to 160 and span/depth ratios of 10, 15, and 20 are considered. A simple finite element analytical (FEA) model is utilized in the study. The results indicate that web slenderness ratio does not have a major effect on fastener forces and the strength behavior of shear diaphragms is dependent on the number of side-lap fasteners. The findings of the study will be used to develop strength and stiffness requirements for shear diaphragms used to brace slender steel beamsConference Object Citation - WoS: 9Cyclic Testing of Steel I-Beams Reinforced With Gfrp(Curran Associates, 2011) Eğilmez, Oğuz Özgür; Yormaz, DorukFlange and web local buckling in beam plastic hinge regions of steel moment frames can prevent beam-column connections from achieving adequate plastic rotations under earthquake-induced forces. This threat is especially valid for existing steel moment frame buildings with beams that lack adequate flange/web slenderness ratios. As the use of fiber reinforced polymers (FRP) have increased in strengthening and repair of steel members in recent years, using FRPs in stabilizing local instabilities have also attracted attention. Previous computational studies have shown that longitudinally oriented glass FRP (GFRP) strips may serve to moderately brace beam flanges against the occurrence of local buckling during plastic hinging. An experimental study was conducted at Izmir Institute of Technology investigating the effects of GFRP reinforcement on local buckling behavior of existing steel I-beams with flange slenderness ratios (FSR) exceeding the slenderness limits set forth in current seismic design specifications and modified by a bottom flange triangular welded haunch. Four European HE400AA steel beams with a depth/width ratio of 1.26 and FSR of 11.4 were cyclically loaded up to 4% rotation in a cantilever beam test set-up. Both bare beams and beams with GFRP sheets were tested in order to investigate the contribution of GFRP sheets in mitigating local flange buckling. Different configurations of GFRP sheets were considered. The tests have shown that GFRP reinforcement can moderately mitigate inelastic flange local buckling.