Civil Engineering / İnşaat Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/13

Browse

Filters

2019 - 201922020 - 20223

Settings

Department: search.filters.department.İzmir Institute of Technology. ArchitectureScopus Q: search.filters.scopusQuartile.N/A

Search Results

Now showing 1 - 5 of 5
  • Conference Object
    Citation - Scopus: 2
    Lighting Quality and Work Performance Based on Glazing Types and Dynamic Led Lighting
    (IEEE, 2022) Köse, Fatma Büşra; Tayfur, Gökmen; Duran, Hasan Engin; Kazanasmaz, Zehra Tuğçe
    The combination of daylight characteristics and LED lighting quantities determines offices' visual environment. Lighting conditions can influence office workers' health and work performance. This study is an experimental one containing lighting measurements in two offices, subjective performance tests, and questionnaires to find out how work performance, lighting preferences, and satisfaction with lighting quality modify in terms of various glass types and dynamic LED lighting quantities. Glass types have strong impacts on contrast tests on paper and luminance which are corresponding to work performance. Regarding lighting quality, it strongly relates to the homogeneity of light, the impression of artificial light and the perception of objects' textures and color, contrast balance between paper and the surrounding. When the glass was modified in offices, we observed that participants preferred to change the CCT setting of LED by remote control, and in relation to that the eye-level illuminance and SPDs showed significant changes. So, the findings depicted the importance of the choice of glass types concerning LED lighting settings in terms of the above variables.
  • Book Part
    Scherengestänge als elemente adaptiver morphologien
    (Birkhäuser, 2020) Akgün, Yenal; Maden, Feray; Gür, Şebnem; Kiper, Gökhan; Korkmaz, Koray; Aktaş, Engin; Yar Uncu, Müjde
    Zu allen Zeiten haben Menschen versucht, flexible Gebäude zu bauen, die sich ständig verändernden Anforderungen und Umweltbedingungen anpassen. Die Einbeziehung von Bewegung in die Architektur ist der Versuch, auf veränderliche Umstände mit neuen Lösungen zu reagieren. Das Konzept der Bewegung ist in der Tat nicht neu für die Architektur. Die Wurzeln gehen bis in die Antike zurück. Einfache, mit flexiblen Außenhäuten gebaute Nomadenzelte können als das erste Beispiel für adaptive Strukturen angesehen werden, die zum Schutz vor extremen Umweltbedingungen dienten.1 Die zum Abdecken des Daches im Colosseum von Rom verwendeten Leinwandbahnen sind ein weiteres Beispiel. Sie bildeten Markisen, die nicht nur Sonnenschutz boten, sondern für die Zuschauer durch ihr Durchhängen zur Mitte hin auch eine Brise einfingen.
  • Conference Object
    Citation - WoS: 1
    Citation - Scopus: 2
    Structural Comparison of Scissor-Hinge Linkages
    (CRC Press, 2019) Maden, Feray; Akgün, Yenal; Yücetürk, Kutay; Aktaş, Engin; Yar Uncu, Müjde; Mitropoulou, C.
    Deployable structures can deploy from a compact to an expanded configuration by changing their sizes. The behaviors of these structures depend on some parameters such as geometric shape, member sizes and kinematic properties. To provide the deployment, not only the arrangements of structural members but also some restrictions must be considered. Moreover, contiguous members of the structures must let the large rotations to provide the transformation between different geometric forms from fully folded to fully deployed configurations. These requirements have an important impact on the fundamental properties of the structures related with structural performance, such as stiffness and strength. In this paper, stiffness of different scissor-hinge linkages are analyzed and compared. These linkages cover the same span with almost the same geometry and have the unit elements with same size and same weight. However, the geometry of unit elements is different from each other. The paper investigates the effect of this difference on the stiffness of whole system. © 2019 Taylor & Francis Group, London.
  • Conference Object
    Citation - WoS: 2
    Citation - Scopus: 2
    A Case Study on the Selection of Optimum Loop Units for the Deployable Arch Structures Exposed To Lateral and Non-Uniform Gravity Loads
    (Elsevier, 2020) Yuceturk, K.; Aktas, E.; Maden, F.; Gur, S.; Mitropoulou, C. C.
    Radially deployable arches may be created by using various types of units. However, for any deployable structure to be constructed in real life, it should satisfy the structural regulations and codes. Despite various advantages from architectural perspective, deployable structures are weak to satisfy the operational code limits when compared to trusses with similar height and span. Therefore, weight minimization is very important to reduce the dead loads of the structure which facilitates the code-conformance of the structure. The optimization of the deployable structures requires an initial selection of the loop types to define the structure parametrically. An initial selection strategy depending on the loads on the structure is important to increase the efficiency of optimization process. Under uniform gravity loads, optimum arrangement for each unit type converges to a similar point. However, in the real world, the loads on the arches are not always uniform and the structure is exposed to nonuniform loadings such as point loads or lateral loads. This work focuses on the performance of various arches with different unit types under lateral and non-uniform vertical loads. Different lateral load and non-uniform gravity loading scenarios are created. For each scenario, the arches with different units are analyzed. In all cases, clear span and height are kept as same. The performance of an arch with a specific unit type for a given load is measured with a score that includes the deformations and the weight of the structure. All the members are assumed to be circular hollow sections with variable diameter and thickness to have a meaningful weight comparison between structures. This work intends to define an initial selection guide for deployable arches under typical non-uniform and lateral loading conditions. (C) 2020 The Authors. Published by Elsevier B.V.
  • Book Part
    Scissor Linkages in the Design of Adaptive Morphologies
    (Walter de Gruyter GmbH, 2019) Akgün, Yenal; Maden, Feray; Gür, Şebnem; Kiper, Gökhan; Korkmaz, Koray; Aktaş, Engin; Yar Uncu, Müjde
    Scissor linkages are capable of forming various expandable structures. Architects can benefit from this type of linkage especially for designing adaptive, movable, transformable shell structures and deployable beam-like structures. Product designers may benefit as well. The two different methods described here convey the basic design approaches. The unit-based method is very effective for obtaining primary geometries like a dome, arch, circle or line, using serial multiplications and arrays of one of the scissor unit types presented here. The loop assembly method is more convenient when a final form, be it straight or free-form, is the main point of departure. In this case, unlike in the unit-based method, it is not necessary to opt for a specific scissor unit type and its dimensional constraints from the beginning. Designers can choose a type and number of loops and then define the scissor units following the loop sides. Since deployability is guaranteed by applying this method, the architect is free to choose the loop type most suitable for the functional needs and aesthetic concerns of the specific design. With the loop assembly method all loop alternatives can be assembled to scissor structures, their possible motions can be tested and evaluated in a short time, whereas the unit-based method is limited to a single type of motion that a specific unit can provide.