Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
20 results
Search Results
Conference Object The Challenges and Advantages of Macro Modeling in Ansys Software for Seismic Vulnerability Assessment of Historic Masonry Structures(National Technical University of Athens, 2023) Demir, Hatice Ayşegül; Yücetürk, Kutay; Aktaş, Engin; Hamamcıoğlu Turan, MineThis study aims at creating an advancement guideline for a software which can be used for seismic vulnerability assessment of historic masonry structures by revealing the results of an experience related to the macro modeling of a historic masonry building. The case study structure is Bergama Bedesten (15th-16th centuries) located in Bergama, Izmir, Turkey. ANSYS software is used for the Finite Element Modeling of the structure. The seismicity at its location is determined and the structural response under lateral loads is obtained together with the dynamic characteristics. Mesh design, component creation according to the used material change in structural elements, contact surface identification, the arrangement of the stress scales, and result interpretation are realized. For these stages, the challenges are discussed with the solutions. The advantageous aspects of the software are explained. For the challenges, in mesh design, the ineffectiveness of cartesian method for some elements was detected and tetrahedrons method was chosen. In contact surface identification, the overlapping portions of structural components could not be detected by the software exactly, so the manual surface separation was realized. In the stress level interpretation, the lack of assignment for material limit strength values to the analysis scale was experienced and the addition of limit values was carried out. The scale also needs manual arrangement for the increase of interval numbers of stress values to emphasize vulnerable zones. This flexibility of scale to be arranged can be seen as an advantage, as well. The 3d section and axonometric view creation provide the presentation of stress changes at inner and outer surfaces of the structure which is another positive side. © 2023 COMPDYN Proceedings. All rights reservedConference Object Citation - Scopus: 1Decoding and Predicting the Attributes of Urban Public Spaces With Soft Computing Models and Space Syntax Approaches(Education and research in Computer Aided Architectural Design in Europe, 2023) Yönder, Veli Mustafa; Doğan, Fehmi; Çavka, Hasan Burak; Tayfur, Gökmen; Dülgeroğlu, ÖzümPeople spend a considerable amount of time in public spaces for a variety of reasons, albeit at various times of the day and during season. Therefore, it is of utmost importance for both urban designers and local authorities to try to gain an understanding of the architectural qualities of these spaces. Within the scope of this study, squares and green parks in Izmir, the third largest city in Turkey, were analyzed in terms of their dimensions, landscape characteristics, the quality of their semi-open spaces, their landmarks, accessibility, and overall aesthetic quality. Using linear predictor, general regression neural networks, multilayer feed-forward neural networks (2-3-4-5-6 nodes), and genetic algorithms, soft computing models were trained in accordance with the results of the conducted analyses. Meanwhile, using space syntax methodologies, a visibility graph analysis and axial map analysis were conducted. The training results (i.e., root mean square error, mean absolute error, bad prediction rates for testing and training phases, and standard deviation of absolute error) were obtained in a comparative table based on training times and root mean square error values. According to the benchmarking table, the network that most accurately predicts the aesthetic score is the 2-node MLFNN, whereas the 6-node MLFN network is the least successful network. © 2023, Education and research in Computer Aided Architectural Design in Europe. All rights reserved.Article Citation - WoS: 2Citation - Scopus: 2Numerical Simulation of Flow and Dam Body Sediment Over a Movable Bed Due To an Earthfill Dam Break(Yıldız Teknik Üniversitesi, 2022) Tayfur, Gökmen; Issakhov, Alibek; Zhandaulet, YeldosThis paper presents the numerical simulations of flow and dam body sediment transport over a movable bed due to an earthfill dam break. The RANS equations, together with the k-omega SST turbulent model, are employed. The phase characteristic parameter is used as the phases of air, water, sediment, and bulk of dam body. The system of equations is solved numerically using the PISO algorithm. The numerical model is first verified using the dam break experimental data from the literature. The model successfully captures the temporal changes in the measured flow depths, pressures, wave fronts, and arrival times. The ve rified mod el is then app lied to simulate the flow and sediment transport as a result of an artificial earthfill dam break having an obstacle at its downstream section. The simulations show that there is a noticeable decrease in the shock pressures at all points around the obstacle and there is an increase in the water levels. The bulk dam body sediment moves together with the water flow wh ile sp reading. It takes longer time for the sediment laden flow to reach the obstacle. The investigation of dam body formed by different soils shows that the soil type has minor effect while the transport of sediment can raise the water levels and change the morphology of the downstream section.Article Citation - Scopus: 3Improvement of Strength Characteristics of a Highly Plastic Expansive Soil by Fly Ash(Sakarya University, 2022) Kodaz, G.; Demirci, H.E.; Pulat, H.F.Highly plastic expansive clays swell or shrink due to change in moisture content and they often have very low bearing capacity. Construction of engineering structures particularly pavements and lightweight buildings on problematic soils such as highly plastic expansive clays may create severe structural problems due to poor engineering properties of that kind of soil. This study focused on the influence of fly ash on strength properties of highly expansive clays which are problematic soils due to their undesirable engineering characteristics such as high plasticity index, liquid limit, swelling and shrinkage characteristics, and low bearing capacity. Atterberg’s limit tests and hydrometer tests were conducted to obtain consistency limits and grain-size distribution of the highly plastic expansive clay. Standard proctor tests for clay samples with different fly ash contents such as 10%, 15%, and 20% were performed to determine maximum dry densities and optimum water contents of the mixtures of clay and fly ash. The clay and fly ash mixtures were prepared at optimum water content and maximum dry density for unconfined compression strength (UCS) and California Bearing Ratio (CBR) tests. Effects of fly0ash content on the strength characteristics of a highly plastic expansive clay were investigated through unconfined compression and CBR tests. The experiment results showed that fly0ash is a promising additive to enhance strength characteristics of highly plastic expansive clays. An approximately 66% increase in UCS and CBR values was observed with the addition of 20% fly ash into the clay mixture in weight. © 2022, Sakarya University. All rights reserved.Conference Object Citation - Scopus: 2Experimental Study of the Evolution of the Breach and the Discharge Through the Breach Resulting From Piping Due To Seepage at the Earth-Fill Dam Bottom(Avestia Publishing, 2022) Güney, Mehmet Şükrü; Dumlu, Emre; Okan, Merve; Bor, Aslı; Aklık, Pelin; Tayfur, GökmenPiping is one of the main causes of the earth-fill dam failures. Most of the researchers realizing numerical analyses make some simplified assumptions concerning the shape of the breach and the discharge of water flowing through the breach. The aim of this study is to realize experiments to provide data needed to perform numerical analyses by making more realistic assumptions. The dam having a height of 0.6 m, a bottom width of 2 m and a crest width of 0.20 m is built in a channel 1 m wide, 0.81 m high and 6.14 m long. The evolution of the breach and the discharge through the breach resulting from piping due to seepage at the earth-fill dam bottom was investigated experimentally. The evolution of the dam failure is recorded by six cameras located at different locations. The time-varied of the breach areas at upstream and downstream sides are determined by applying the Gauss Area functions. The discharge of water through the breach and average outflow velocity are determined by using the continuity equation.Article An Experimental Study on Release Mechanism of Iron and Manganese From Sediments To the Water Column in Reservoirs(2021) Vural, Buse; Elçi, Şebnem; Ökten, Hatice EserIron and manganese accumulation in drinking water reservoirs is a challenging issue and should be controlled to prevent their adverse effects on human health. Accumulation of these elements not only clogs pipeline systems but also causes stains on fixtures and laundry. Also, high concentrations of iron and manganese may lead to various health problems when ingested. This study focuses on the release mechanism of iron and manganese from sediments to the water column in reservoirs and investigates methods to prevent this release. Effects of hypoxia, hypolimnetic aeration, alkalinity of water, and thermal stratification on iron and manganese concentrations were investigated through laboratory experiments. Experiments done simulating the water column showed that hypoxia caused more dissolution of ferrous iron when compared with that of manganese. Accordingly, aeration of the water column in hypoxic conditions lead to a significant decrease in ferrous iron concentrations (in our case reaching zero). However, manganese and total iron levels were not affected by the aeration of the water column. Alkalinity level of the water column was observed to have a great effect on the solubility of iron and manganese. Concentrations of total Fe and total Mn measured for acidic (pH = 5) conditions were considerably greater than concentrations measured at neutral conditions. As for alkaline (pH = 11) conditions, the opposite was observed with measured concentrations of total Fe and total Mn being lower than the ones measured for neutral conditions. Thermal stratification had an enhancing effect on the solubility of both iron and manganese ions. While aeration of the stratified water column slightly decreased the concentrations of Total Fe and Mn, it had a greater impact on decreasing $Fe^{2+}$ concentrations.Conference Object Citation - WoS: 2Citation - Scopus: 3Micromechanical Modeling of Inter-Granular Localization, Damage and Fracture(Elsevier, 2018) Yalçınkaya, Tuncay; Özdemir, İzzet; Fırat, Ali Osman; Tandoğan, İzzet TarıkThe recent developments in the production of miniaturized devices increases the demand on micro-components where the thickness ranges from tens to hundreds of microns. Various challenges, such as size effect and stress concentrations at the grain boundaries, arise due to the deformation heterogeneity observed at grain scale. Various metallic alloys, e.g. aluminum, exhibit substantial localization and stress concentration at the grain boundaries. In this regard, inter-granular damage evolution, crack initiation and propagation becomes an important failure mechanism at this length scale. Crystal plasticity approach captures intrinsically the heterogeneity developing due to grain orientation mismatch. However, the commonly used local versions do not possess a specific GB model and leads to jumps at the boundaries. Therefore, a more physical treatment of grain boundaries is needed. For this purpose, in this work, the Gurtin GB model (Gurtin (2008)) is incorporated into a strain gradient crystal plasticity framework (Yalcinkaya et al. (2011), Yalcinkaya et al. (2012), Yalcinkaya (2017)), where the intensity of the localization and stress concentration could be modelled considering the effect of grain boundary orientation, the mismatch and the strength of the GB. A zero thickness 12-node interface element for the integration of the grain boundary contribution and a 10-node coupled finite element for the bulk response are developed and implemented in Abaqus software as user element subroutines. 3D grain microstructure is created through Voronoi tessellation and the interface elements are automatically inserted between grains. After obtaining the localization, the mechanical behavior of the GB is modelled through incorporation of a potential based cohesive zone model (see Park et al. (2009), Cerrone et al. (2014)). The numerical examples present the performance of the developed tool for the intrinsic localization, crack initiation and propagation in micron-sized specimens. (C) 2018 The Authors. Published by Elsevier B.V.Article Citation - WoS: 7Citation - Scopus: 8Enrichment of Trace Element Concentrations in Coal and Its Combustion Residues and Their Potential Environmental and Human Health Impact: Can Coal Basin, Nw Turkey as a Case Study(Inderscience Enterprises, 2016) Baba, Alper; Gürdal, Gülbin; Şanlıyüksel Yücel, DenizIn this study, the variation of trace element concentrations ( total of 48 trace elements including rare earth elements) in coal, coal ash and fly ash were examined and compared with coal Clarke values. Results showed that the average concentrations of trace elements including As, B, Cu, Ce, Co, Cs, Gd, Hf, La, Lu, Mo, Nd, Nb, Pr, Pb, Sc, Sm, Ta, Tb, Th, U, V, W, Y, Yb, Zn and Zr in the Can Basin coals are higher than their respective Clarke values for world low-rank coals. The elements As, Cu, Co, Cs, Mo, Nb, Sc, Pb, Pr, Th, U, V, Zn and Zr are enriched in coal ashes, whereas As, Co, Nb, Sc, U and V are enriched in fly ashes. Among the elements, maximum enrichment in coal was observed for As, with the average concentration of 253.5 ppm As in the Can Basin coals, while the coal Clarke value is 14 ppm and world average value is 8.3 ppm. From the ecotoxicological point of view, combustion residues formed by indoor combustion of coal and/or in thermal power plants may be a hazard to the environment and to aquatic and terrestrial life including human beings, particularly As, trace elements and released radioactive elements.Conference Object Citation - WoS: 1Citation - Scopus: 2Three Dimensional Grain Boundary Modeling in Polycrystalline Plasticity(American Institute of Physics, 2018) Yalçınkaya, Tuncay; Özdemir, İzzet; Fırat, Ali OsmanAt grain scale, polycrystalline materials develop heterogeneous plastic deformation fields, localizations and stress concentrations due to variation of grain orientations, geometries and defects. Development of inter-granular stresses due to misorientation are crucial for a range of grain boundary (GB) related failure mechanisms, such as stress corrosion cracking (SCC) and fatigue cracking. Local crystal plasticity finite element modelling of polycrystalline metals at micron scale results in stress jumps at the grain boundaries. Moreover, the concepts such as the transmission of dislocations between grains and strength of the grain boundaries are not included in the modelling. The higher order strain gradient crystal plasticity modelling approaches offer the possibility of defining grain boundary conditions. However, these conditions are mostly not dependent on misorientation of grains and can define only extreme cases. For a proper definition of grain boundary behavior in plasticity, a model for grain boundary behavior should be incorporated into the plasticity framework. In this context, a particular grain boundary model ([l]) is incorporated into a strain gradient crystal plasticity framework ([2]). In a 3-D setting, both bulk and grain boundary models are implemented as user-defined elements in Abaqus. The strain gradient crystal plasticity model works in the bulk elements and considers displacements and plastic slips as degree of freedoms. Interface elements model the plastic slip behavior, yet they do not possess any kind of mechanical cohesive behavior. The physical aspects of grain boundaries and the performance of the model are addressed through numerical examples.Conference Object Citation - WoS: 1Development of a Proper Mix-Design for Impact Loading of Deflection Hardening Hybrid Fiber Reinforced Concrete(Springer Verlag, 2018) Alami, Muhammad Musa; Erdem, Tahir Kemal; Yardımcı, Mert Yücel; Aydın, SerdarThis study aims to develop a low-cost Hybrid Fiber Reinforced Concrete (HyFRC) that exhibits deflection hardening behavior under bending and has high energy absorption capacity under impact loading by determining proper combination of steel and polyvinyl alcohol (PVA) fibers. More than forty mixtures were prepared including two mixtures of conventional concrete, six mixtures of Engineered Cementitious Composites (ECC), and thirty-six mixtures of HyFRC. The design parameters were chosen as fly ash to cement ratio (1.2, 1.7 and 2.2), steel fiber type and amount (0.5%, 0.75%, and 1.25% by volume), PVA fiber amount (0.25% and 0.50% by volume), and maximum aggregate size (Dmax) of 8 mm and 16 mm. Several tests were carried out on fresh and hardened specimens such as bending, compression, and low-velocity flexural impact loading. Based on the results, it is found that the mixture with 0.75% steel fiber and 0.25% PVA showed the best performance for the aim of the study.