Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
4 results
Search Results
Article Citation - WoS: 12Citation - Scopus: 16Misorientation and Grain Boundary Orientation Dependent Grain Boundary Response in Polycrystalline Plasticity(Springer, 2021) Yalçınkaya, Tuncay; Özdemir, İzzet; Tandoğan, İzzet TarıkThis paper studies the evolution of intergranular localization and stress concentration in three dimensional micron sized specimens through the Gurtin grain boundary model (J Mech Phys Solids 56:640-662, 2008) incorporated into a three dimensional higher-order strain gradient crystal plasticity framework (Yalcinkaya et al. in Int J Solids Struct 49:2625-2636, 2012). The study addresses continuum scale dislocation-grain boundary interactions where the effect of crystal orientation mismatch and grain boundary orientation are taken into account through the grain boundary model in polycrystalline metallic specimens. Due to the higher-order nature of the model, a mixed finite element formulation is used to discretize the problem in which both displacements and plastic slips are considered as primary variables. For the treatment of grain boundaries within the solution algorithm, an interface element is formulated and implemented together with the bulk plasticity model. The capabilities of the framework is demonstrated through 3D polycrystalline examples considering grain boundary conditions, grain boundary strength, the orientation distribution and the specimen size. A detailed grain boundary condition and stress concentration analysis is presented. The advantages and the disadvantages of the model is discussed in detail through numerical examples.Article Citation - WoS: 32Citation - Scopus: 37Void Growth Based Inter-Granular Ductile Fracture in Strain Gradient Polycrystalline Plasticity(Elsevier, 2021) Yalçınkaya, Tuncay; Tandoğan, İzzet Tarık; Özdemir, İzzetThe precipitation hardened, high strength aerospace alloys (e.g. Al 7000 alloy series) suffer from loss of fracture toughness due to the heat treatment leading to intergranular ductile fracture. Depending on the quenching and aging processes, large precipitates at the grain boundaries with wide precipitate free zones might develop. Therefore the grain boundaries constitute a potential location for micro void formation and evolution under the effect of external loads. This is a common problem of such materials where there is considerable ductile intergranular fracture, which is normally attributed to the embrittlement effects of the environment in other type of alloys. In this context, for the modeling of such a degradation process, the current paper develops a physics based intergranular cracking model of polycrystalline materials where a strain gradient crystal plasticity model is combined with cohesive zone elements whose traction separation relation is based on the evolution of micro-voids at the grain boundaries. The framework successfully predicts the intergranular crack formation and propagation, taking into account different microstructural features, such as porosity, pore shape, grain orientation distribution, and grain boundary conditions.Article Citation - WoS: 22Citation - Scopus: 27Micromechanical Modeling of Intrinsic and Specimen Size Effects in Microforming(Springer Verlag, 2018) Yalçınkaya, Tuncay; Özdemir, İzzet; Simonovski, IgorSize effect is a crucial phenomenon in the microforming processes of metallic alloys involving only limited amount of grains. At this scale intrinsic size effect arises due to the size of the grains and the specimen/statistical size effect occurs due to the number of grains where the properties of individual grains become decisive on the mechanical behavior of the material. This paper deals with the micromechanical modeling of the size dependent plastic response of polycrystalline metallic materials at micron scale through a strain gradient crystal plasticity framework. The model is implemented into a Finite Element software as a coupled implicit user element subroutine where the plastic slip and displacement fields are taken as global variables. Uniaxial tensile tests are conducted for microstructures having different number of grains with random orientations in plane strain setting. The influence of the grain size and number on both local and macroscopic behavior of the material is investigated. The attention is focussed on the effect of the grain boundary conditions, deformation rate and the grain size on the mechanical behavior of micron sized specimens. The model is intrinsically capable of capturing both experimentally observed phenomena thanks to the incorporated internal length scale and the crystallographic orientation definition of each grain.Conference Object Citation - WoS: 1Citation - Scopus: 2Three Dimensional Grain Boundary Modeling in Polycrystalline Plasticity(American Institute of Physics, 2018) Yalçınkaya, Tuncay; Özdemir, İzzet; Fırat, Ali OsmanAt grain scale, polycrystalline materials develop heterogeneous plastic deformation fields, localizations and stress concentrations due to variation of grain orientations, geometries and defects. Development of inter-granular stresses due to misorientation are crucial for a range of grain boundary (GB) related failure mechanisms, such as stress corrosion cracking (SCC) and fatigue cracking. Local crystal plasticity finite element modelling of polycrystalline metals at micron scale results in stress jumps at the grain boundaries. Moreover, the concepts such as the transmission of dislocations between grains and strength of the grain boundaries are not included in the modelling. The higher order strain gradient crystal plasticity modelling approaches offer the possibility of defining grain boundary conditions. However, these conditions are mostly not dependent on misorientation of grains and can define only extreme cases. For a proper definition of grain boundary behavior in plasticity, a model for grain boundary behavior should be incorporated into the plasticity framework. In this context, a particular grain boundary model ([l]) is incorporated into a strain gradient crystal plasticity framework ([2]). In a 3-D setting, both bulk and grain boundary models are implemented as user-defined elements in Abaqus. The strain gradient crystal plasticity model works in the bulk elements and considers displacements and plastic slips as degree of freedoms. Interface elements model the plastic slip behavior, yet they do not possess any kind of mechanical cohesive behavior. The physical aspects of grain boundaries and the performance of the model are addressed through numerical examples.