Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
4 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 2Effects of Mix-Design Variables on the Workability, Rheology and Stability of Self-Consolidating Concrete(Pontificia Universidad Catolica de Chile, Escuela de Construccion Civil, 2022) Alami, Mohammad Musa; Erdem, T.K.This study investigates the effects of basic mix design variables such as water/cement ratio (w/c), slump flow, coarse-to-total aggregate ratio (CA/TA), and maximum aggregate size (Dmax) on the main characteristics of self-consoli-dating concrete. The w/c of the mixtures was either 0.42 or 0.50. The CA/TA ranged between 0.45 and 0.53. Slump flow was adjusted to 550, 650 or 720 ±20 mm by varying the superplasticizer content. Dmax was varied as 10, 15 and 20 mm. V-funnel, L-box, rheometer, sieve segregation tests and a new test method, recently developed by the authors, for dynamic segregation resistance were performed. The effect of each variable on the test results were effectively summarized in a table. Increasing the w/c, CA/TA and Dmax decreased the superplasticizer demand and increased the flowability. When the slump flow, w/c and CA/TA were higher, viscosity was found to be lower. Higher values of CA/TA and Dmax were found to reduce the passing ability. Increasing the slump flow (or superplasticizer content), CA/TA and Dmax disturbed the sta-bility. Generally, the effects of w/c and slump flow on the SCC characteristics were more pronounced when compared to those of CA/TA and Dmax. Good correlations were obtained between several test results © Copyright (c) 2022 Alami, M. and Erdem, T. This work is licensed under a Creative Commons Attribution-Noncommercial-No Derivatives 4.0 International LicenseArticle Citation - WoS: 19Citation - Scopus: 22Influence of Thixotropy Determined by Different Test Methods on Formwork Pressure of Self-Consolidating Concrete(Elsevier Ltd., 2018) Tuyan, Murat; Ahari, Reza Saleh; Erdem, Tahir Kemal; Andiç Çakır, Özge; Ramyar, KambizIn this experimental study, the influence of thixotropy determined by different test methods on the formwork pressure of self-consolidating concrete (SCC) with varying compositions was investigated. In order to determine the effect of water/binder (w/b) ratio, slump flow diameter and coarse aggregate/total aggregate (CA/TA) ratio on thixotropy and formwork pressure of SCC, fifteen concrete mixtures were prepared. Four different test methods i.e., “structural break-down area” (SBDA), “break-down percentage” (BDP), “drop in apparent viscosity” (DAV) and “yield value at rest” (YVR) were performed to determine the thixotropy of the SCC mixtures. Test results showed that the SBDA, DAV and YVR methods were more appropriate to evaluate the thixotropy of SCC than the BDP method. A strong correlation between thixotropy and formwork pressure was found using SBDA, DAV and YVR methods in SCC mixtures having low w/b ratio. There was a strong relationship between thixotropy determined by SBDA, BDP and DAV methods and formwork pressure in low slump flow SCC mixtures, while thixotropy determined by the YVR method showed good correlation with the formwork pressure in SCC mixtures having high slump flow values. Finally, new models were developed to estimate the formwork pressure of all kinds of mixtures as a function of thixotropy and time. The models were found to be successful for each of the thixotropy measurement method.Article Citation - WoS: 70Citation - Scopus: 86Permeability Properties of Self-Consolidating Concrete Containing Various Supplementary Cementitious Materials(Elsevier Ltd., 2015) Saleh Ahari, Reza; Erdem, Tahir Kemal; Ramyar, KambizIn this study, permeability properties of 17 self-consolidating concrete (SCC) mixtures containing various supplementary cementitious materials (SCM) were investigated by different experimental approaches. The effects of SCM type and content on the compressive strength, rapid chloride ion permeability (RCPT), water penetration depth, water absorption and sorptivity were studied. For these purposes, various amounts of silica fume (SF), metakaolin (MK), Class F fly ash (FAF), Class C fly ash (FAC) and granulated blast-furnace slag (BFS) were utilized in binary, ternary, and quaternary cementitious blends. Results showed that partial replacement of PC by SCM increased the compressive strength of control mixtures at 28 and 90 days (except for FAF at 28 days). Mixtures containing MK presented a better performance compared to other SCM at 7 days. The utilization of SCM reduced the RCPT results of almost all mixtures compared to the control mixtures and the reduction was more significant with an increase in the SCM content. All of the mixtures containing SCM had lower penetration depths when compared to reference mixtures at 28 and 90 days. Good correlations were established between the percentage of permeable voids and water absorption. Moreover, there was an inverse but almost linear relationship between permeable voids content and compressive strength of the mixtures.Article Citation - WoS: 111Citation - Scopus: 132Thixotropy and Structural Breakdown Properties of Self Consolidating Concrete Containing Various Supplementary Cementitious Materials(Elsevier Ltd., 2015) Ahari, Reza Saleh; Erdem, Tahir Kemal; Ramyar, KambizAbstract In this study, thixotropy and structural breakdown of 57 self-consolidating concrete (SCC) mixtures containing various supplementary cementitious materials (SCM) were investigated by different approaches. The effects of SCM type and content on high range water reducer demand and plastic viscosity were also studied. For these purposes, various amounts of silica fume (SF), metakaolin (MK), Class F fly ash (FAF), Class C fly ash (FAC) and granulated blast-furnace slag (BFS) were utilized in binary, ternary, and quaternary cementitious blends in three water/binder (w/b) ratios. Results showed that except BFS, use of SCM in SCC mixtures increased thixotropy values in comparison with the mixtures containing only portland cement (PC). Good correlations were established between structural breakdown area and drop in apparent viscosity values for all w/b ratios. The different methods used to evaluate the thixotropy and structural breakdown got more consistent with each other as w/b decreased.