Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
35 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 9Holistic Managements of Textile Wastewater Through Circular, Greener and Eco-Innovative Treatment Systems Developed by Minimal To Zero Liquid Discharge(Elsevier, 2024) Aydıner, Coşkun; Doğan, Esra Can; Mert, Berna Kiril; Pala, Burcu; Demirozlu, Tugba Nur; Balcı, Esin; Narci, Ali OguzhanNew pragmatic and viable solutions to reduce or prevent discharge and to protect reserves are currently among the top-prioritised research for cleaner, circular, and resource-efficient use of industrial waters. So, the development of eco-sustainable water management is essential for green industrial development that will meet versatile and eco-sensitive regulatory standards, especially in water-intensive industries. Textile wastewater was reclaimed in semi to fully closed loops for minimal to zero liquid discharge. Concentrate-mixed wastewater was steadily treated in a hybrid membrane oxidation reactor at 60-80 % synergistic performances with remarkable UF fluxes of 96.4-820 L/m2h without any sludge discharge. Effluent was purified with 90-100 % removals and 20-80 L/m2h in nanofiltration and reverse osmosis. Due to Fenton-specific operation, more handling by ion exchange and neutralisation required to harvest membrane reuse waters and reactor discharge effluents with guaranteed Fe and pH. All-in-one system simulations indicated that high quality reuse waters are produced by 99.9 % efficiency and 98 and 100 % savings in iron and acid but 20-51 % more oxidant through concentrate recycling and regenerant reuse. It was also revealed that reactor effluents can be released to the sea or conventional biological treatment or can be eco-sustainably exploited for in-situ chemical and ex-situ bio-induced recovery of vivianite. This research demonstrates that how textile wastewater can be managed holistically by liquid discharge approaches from 50 % minimal to 99.9 % zero just in two-step, i.e. pretreatment and preconcentration, with consumable minimisation and valuable waste recovery through the eco-innovative systems which are developed as circular, greener, and sludge-free compatible with sustainable development goals.Article Citation - WoS: 3Citation - Scopus: 3Ensemble and Optimized Hybrid Algorithms Through Runge Kutta Optimizer for Sewer Sediment Transport Modeling Using a Data Pre-Processing Approach(Elsevier, 2023) Safari, Mir Jafar Sadegh; Gül, Enes; Dursun, Ömer Faruk; Tayfur, GökmenUncontrolled sediment deposition in drainage and sewer systems raises unexpected maintenance expenditures. To this end, implementation of an accurate model relying on effective parameters involved is a reliable benchmark. In this study, three machine learning techniques, namely extreme learning machine (ELM), multilayer perceptron neural network (MLPNN), and M5P model tree (M5PMT); and three optimization approaches of Runge Kutta (RUN), genetic algorithm (GA), and particle swarm optimization (PSO) are applied for modeling. The optimization and ensemble hybridization approaches are applied in the modeling procedure. For the case of hybrid optimized models, the ELM and MLPNN models are hybridized with RUN, GA, and PSO algorithms to develop six hybrid models of ELM-RUN, ELM-GA, ELM-PSO, MLPNN-RUN, MLPNN-GA, and MLPNN-PSO. Ensemble hybrid models are developed through coupling the ELM and MLPNN models with the M5PMT algorithm. The data pre-processing approach is applied to find the best randomness characteristic of the utilized data. Results illustrate that the RUN-based hybrid models outperform the GA- and PSO-based counterparts. Although the MLPNN-RUN and MLPNN-M5PMT hybrid models generate better results than their alternatives, MLPNN-M5PMT slightly outperforms MLPNN-RUN model with a coefficient of determination of 0.84 and a root mean square error of 0.88. The current study shows the superiority of the ensemble-based approach to the optimization techniques. Further investigation is needed by considering alternative optimization techniques to enhance sediment transport modeling. © 2023 International Research and Training Centre on Erosion and Sedimentation/the World Association for Sedimentation and Erosion ResearchReview Citation - WoS: 42Citation - Scopus: 49Utilization of Waste Materials in the Stabilization of Expansive Pavement Subgrade: an Extensive Review(Elsevier, 2023) Tanyıldızı, Muhammed; Uz, Volkan Emre; Gökalp, İslamExpansive soils, also known as swell-shrink soils, are one of the most problematic soils in highway construction and exhibit significant volume changes by swelling and shrinking while wet and dry, respectively. These changes in soil cause cracks, heaves, differential settlements, and damages to the overlying pavements leading to high maintenance costs. The annual average maintenance cost of structures built on expansive soils ranges from $9 to $15 billion, with 50% of the expenses associated with highways and streets. Chemical stabilization techniques such as cement and lime stabilization are one of the most efficient ways to treat expansive soils. However, there is a need to develop environmentally friendly approaches to stabilize expansive soils due to worldwide growing interest in sustainable developments and concerns about greenhouse gas emissions and climate change. In this context, using waste materials in soil stabilization has been considered an important issue for sustainability concerns. The aim of the current study is to review the relevant studies performed to improve the geotechnical and engineering properties of expansive subgrade soils of pavements by using waste materials arising from industrial, agricultural, and other activities in the last decade. In the organization of this study, characteristics of expansive soils including plasticity, compaction, strength & stiffness, microstructural characteristics, shrink-swell properties, and durability were focused to point out the effect of the waste materials. The overall results obtained throughout the scope of the current study indicated that the use of waste materials in soil stabilization improves the engineering properties of expansive soils, significantly. This paper also provides key information and creates awareness for researchers and sector representatives about sustainable soil stabilization.Letter Reply To the Discussion on “the Modified Vlasov Model on a Nonhomogeneous and Nonlinear Soil Layer”(Elsevier, 2023) İşbuğa, Volkan; Çerezci, Mehmet; Aşık, A. ZülfüThe discussion suggests that the paper has left out four references (Haldar and Basu, 2013; Haldar and Basu, 2016; Elhuni and Basu, 2019; Elhuni and Basu, 2021), and the research work in the paper is not new. The authors would like to state that the literature review in the paper was kept as vast as and to stay as close as possible to the model given in the paper, which is a gross model. The study aimed to offer a method using a previously developed formulation for accounting for soil nonlinearity (Vallabhan and Das, 1988,1991a,1991b). The primary concentration in the literature was given to the most relevant works on the modified Vlasov model that employs the same concept for the solution method and algorithm, which lays the foundation of the paper (Vallabhan and Das 1988,1991a,1991b; Asik, 1999; Asik and Vallabhan,2001). On the other hand, as clearly indicated in the study, the literature in the field is extensive, including the works suggested by the discussion. Despite the author’s efforts, it was not possible to review or/ and mention all the works previously conducted to solve the problem with different approaches. In this respect, the previous studies by Haldar and Basu (2013) and Elhuni and Basu (2019) mentioned in the discussion are not directly related to the problem considered in the paper. Haldar and Basu (2016) proposed a framework incorporating the finite difference and the finite element methods.Article Citation - WoS: 11Citation - Scopus: 12An Improved Passive Tuned Mass Damper Assisted by Dual Stiffness(Elsevier, 2023) Roozbahan, Mostafa; Turan, GürsoyA tuned mass damper (TMD) is one of the oldest and most commonly used passive control devices attached to structures to absorb lateral loads of energy from main systems. In the last decades, several novel tuned mass dampers have been designed to increase the performance of TMDs in decreasing the structural responses during excitation vibrations. Moreover, several formulations and numerical optimization methods have been developed to optimize the TMDs parameters. This paper proposes a novel passive tuned mass damper with dual stiffness (DSTMD). The DSTMD includes mass, primary and secondary springs, dashpot, and motion limiting chamber. The performance of DSTMDs depends on their properties such as mass, primary and secondary stiffness, damping coefficient, and the length of the motion limiting chamber. Thus, a metaheuristic optimization algorithm, called the Mouth Brooding Fish algorithm, was used to optimize the DSTMDs parameters. The effectiveness of the optimum DSTMD on two different linear ten-story structures under several earthquakes has been studied and compared with the effectiveness of classical optimum TMDs. According to the study, optimum DSTMDs generally show better effects for certain excitations, and as an average performance, they are superior compared to the classical optimum TMDs in reducing maximum displacement of the buildings. At last, structural yielding is considered, and the performance analysis on this structure shows that the DSTMD has a superior effect in reducing the maximum displacement and is among the best methods for the calculated absolute yielding amount.Article Citation - WoS: 13Citation - Scopus: 14Boron Removal From Geothermal Brine Using Hybrid Reverse Osmosis/Microbial Desalination Cell System(Elsevier, 2023) Jarma, Yakubu A.; Kabay, Nalan; Baba, Alper; Ökten, Hatice Eser; Gören, Ayşegül YağmurAgriculture sector leads worldwide as the most water consuming sector with water demand. Since natural water resources cannot keep up with the demand, a shift from conventional water resources to unconventional ones is needed. While geothermal water was gaining importance for its energy content, small-scale (<10 L/s) energy plants were not required to reinject their spent geothermal brine. As geothermal resources align with agricultural areas in Western Anatolia, discharge of untreated brine might have severe adverse effects on crop yields and soil quality. In this study, we investigated use of spent geothermal brine for irrigation after treatment with Reverse Osmosis/Microbial Desalination Cell (RO/MDC) hybrid process. Treatment efficiencies for B, COD, As, Li, Fe, Cr concentrations and energy production values were determined. Treated water was initially evaluated for irrigation considering three quality categories (I, II, and III) comprised of parameters such as electrical conductivity (EC), total dissolved solids (TDS), and sodium adsorption ratio (SAR), along with sodium, chloride and boron concentrations. Additionally, magnesium adsorption ratio (MAR) and permeability index (PI) were used to evaluate for irrigation suitability. Although B concentrations in MDC-treated permeate (3.29 mg/L) and concentrate (2.99 mg/L) streams were not low enough to meet Quality I criterion (<0.7 mg/L), they can be still utilized in irrigation of moderate-to-high tolerant plants. Furthermore, PI and MAR parameters pointed to suitability for irrigational use. © 2022Article Citation - WoS: 10Citation - Scopus: 11Experimental Investigation of Sediment Movement as a Result of Homogeneous Earth-Fill Dam Overtopping Break Over a Simplified Urban Area(Elsevier, 2023) Taşkaya, Ebru; Bombar, Gökçen; Tayfur, GökmenWhen an earth-fill dam breaks, dam body sediment and water flow simultaneously move to downstream area causing devastation. Dam break studies in the literature have concentrated mostly on the water flow part while ignoring the sediment movement by designing the dam body as a movable metal gate. This study, however, is the first one experimentally investigating flow and sediment transport due to an earth-fill dam break by constructing the dam body from sediment. Sediment propagation as a result of homogenous earth-fill dam overtopping break was experimentally studied in a laboratory flume of 18.4 m long and 2.0 m wide, and 0.88 m in height in the Hydraulics Laboratory of Izmir Katip Celebi University, Izmir, Turkey. Downstream section right after the dam body was designed as a smooth bed and rough bed. The rough bed, resembling a simplified urban area, was created by using thirteen 10 × 10 × 10 cm sized concrete blocks. The dam body was constructed as homogenous with uniform material having D50 = 0.441 mm. The earth-fill dam body was built using the standard compression methods; each layer of sediment with a thickness of 10 cm was laid in layers, and the body was prepared with a crest width of 10 cm, a transverse base width of 200 cm, a longitudinal base width of 202 cm and height of 60 cm with upstream and downstream slopes of 1:1.6. The water level behind the dam was gradually raised until it overtopped the crest level. A pre-breach was formed at the top of the dam to trigger the break. During each dam break event, water depths were measured by three ULS-40D level meter sensors at different locations, and the final sediment bathymetry map was generated using the ULS-40D Probes at 10 × 10 cm grids. The results showed that, in both smooth and rough downstream bed cases, the dam body eventually collapsed while a great portion of it was carried away by the flood flow. The sediment spreading occurred all over the downstream area, showing significant non-uniform variation in thickness both longitudinally and transversely, especially in the simulated urban area. All the residential areas, while breaking in motion, were submerged under the muddy flow. Some blocks were almost submerged while sediment heights reached half level of some blocks at the end of the experiment. Sediment heights were higher in the urban area.Article Citation - WoS: 8Citation - Scopus: 13Masonry Buildings Subjected To Settlements: Half-Scale Testing, Detailed Measurements, and Insights Into Behaviour(Elsevier, 2023) Dalgıç, Korhan Deniz; Gülen, Burcu; Liu, Yiyan; Açıkgöz, Sinan; Burd, Harvey; Maraşlı, Muhammed; İlki, AlperIndustry procedures to assess the risk of settlement-induced damage to masonry buildings ignore key aspects of the problem, such as the influences of building weight, façade openings, and floor structures. Experimental data are needed to characterise the influence of these aspects on damage. This paper describes tests on three brick masonry half-scale building models subjected to settlements. The use of scaling rules in choosing the model materials and kentledge, the settlement apparatus, and the cross-validation of displacement and strain measurements are presented. Comparative evaluation of building responses show that: (i) the distribution of building weight and the resulting in-situ stresses play a key role in determining compliance to settlements, (ii) openings make the structure vulnerable to cracking and (iii) floor slabs stiffen and strengthen the building and prevent the formation of damage in the upper floors, leading to a concentration of damage at the ground storey.Article Citation - WoS: 112Citation - Scopus: 137Autonomous Electric Vehicles Can Reduce Carbon Emissions and Air Pollution in Cities(Elsevier, 2022) Ercan, Tolga; Onat, Nuri C.; Keya, Nowreen; Tatari, Ömer; Eluru, Naveen; Küçükvar, MuratHeavy dependence on personal vehicle usage made the transportation sector a major contributor to global climate change and air pollution in cities. In this study, we analyzed autonomous electric vehicles and compared their potential environmental impacts with public transportation options, carpooling, walking, cycling, and various transportation policy applications such as limiting lane-mile increases, and carbon tax. Fractional split multinomial logit and system dynamics modeling approaches are integrated to create a novel hybrid simulation model to process data from 929 metro/micropolitan areas in the U.S. for transportation mode choice behavior. The results show that the adoption of autonomous electric vehicles can reduce greenhouse gas emissions by up to 34% of the total emissions from transportation by 2050. This study has revealed that transportation-related impacts can only be reduced with a paradigm shift in the current practices of today's transportation industry, with disruptive reforms of automation, electrification, and shared transport.Article Citation - WoS: 40Citation - Scopus: 47Boron in Geothermal Energy: Sources, Environmental Impacts, and Management in Geothermal Fluid(Elsevier, 2022) Mott, A.; Baba, Alper; Hadi Mosleh, Mojgan; Ökten, Hatice Eser; Babaei, Masoud; Gören, Ayşegül Yağmur; Feng, C.; Recepoğlu, Yaşar Kemal; Uzelli, Taygun; Uytun, Hüseyin; Morata, Diego; Yüksel Özşen, AslıThe problem of hazardous chemicals in geothermal fluid is a critical environmental concern in geothermal energy developments. Boron is among the hazardous contaminants reported to be present at high concentrations in geothermal fluids in various countries. Poor management and inadequate treatment of geothermal fluids can release excessive boron to the environment that has toxic effects on plants, humans, and animals. Despite the importance of boron management in geothermal fluid, limited and fragmented resources exist that provide a comprehensive understanding of its sources, transport and fate, and the treatment strategies in geothermal energy context. This paper presents the first critical review from a systematic and comprehensive review on different aspects of boron in geothermal fluid including its generation, sources, toxicity, ranges and the management approaches and treatment technologies. Our research highlights the origin of boron in geothermal water to be mainly from historical water-rock interactions and magmatic intrusion. Excessive concentrations of boron in geothermal fluids have been reported (over 500 mg/L in some case studies). Our review indicated that possible boron contamination in geothermal sites are mostly due to flawed construction of production/re-injection wells and uncontrolled discharge of geothermal water to surface water. The dominancy of non-ionic H3BO3 species makes the selection of the suitable treatment method for geothermal waters limited. Combining boron selective resins and membrane technologies, hybrid systems have provided effluents suitable for irrigation. However, their high energy consumption and course structure of boron selective resins encourage further research to develop cost-effective and environmentally friendly alternatives.