Civil Engineering / İnşaat Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/13

Browse

Filters

2017 - 20195

Settings

Author: search.filters.author.Topçu, GökhanDepartment: search.filters.department.İzmir Institute of Technology. Materials Science and Engineering

Search Results

Now showing 1 - 5 of 5
  • Article
    Citation - WoS: 13
    Citation - Scopus: 16
    The Injection of Co2 To Hypersaline Geothermal Brine: a Case Study for Tuzla Region
    (Elsevier Ltd., 2019) Topçu, Gökhan; Koç, Gonca A.; Baba, Alper; Demir, Mustafa Muammer
    Scaling is a serious issue for geothermal power plants since it remarkably decreases the harvesting of energy. The reduction of pH by organic acids whose structure is close to CO2 for instance formic acid has been an effective solution for the minimization of scaling. Herein, the effect of CO2 injection on the formation of scaling particularly metal-silicates was investigated for the model case of Tuzla Geothermal Field (TGF) located in the northwest of Turkey. CO2 has an acidic character in aqueous systems because it leads to the formation of carbonic acid. The injection of 20.6 m3/s CO2 (approximately 88 ppm) to hypersaline brine of TGF is a promising green approach for both mitigation of scaling by reducing pH from 7.2 to 6.2 at the well-head and the minimization of potential corrosion compared to the use of formic acid (55 ppm).
  • Article
    Citation - WoS: 21
    Citation - Scopus: 27
    Increasing Solubility of Metal Silicates by Mixed Polymeric Antiscalants
    (Elsevier Ltd., 2019) Topçu, Gökhan; Çelik, Aslı; Kandemir, Ali; Baba, Alper; Şahin, Hasan; Demir, Mustafa Muammer
    The increase of silicate solubility is a big challenge for both hot and cold water because it reduces the deposition of metal silicates frequently observed in such systems and causes operational obstacles. The deposition of silicate coats the inner surface of the pipelines in an uncontrolled manner and reduces the harvesting of energy from brines. In this work, the solubility performance of two commercial water-soluble polymeric agents (poly(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA)) of various molecular weights employing dosage from 25 to 100 mg/L was examined. Along with dispersant-type antiscalant, poly(acrylamide) (PAM), poly(vinylsulfonic acid, sodium salt) (PVSA), and poly(vinylphosphonic acid) (PVPA) having chelating acidic groups were employed. Metal silicate deposits were obtained artificially in the lab-scale pressurized reactor. The experimental conditions employed were quite similar to a model power plant located in Çanakkale, Turkey. The concentration of dissolved silica was increased from 130 to 420 mg/L when 100 mg/L PEG 1500 and 25 mg/L PVSA were employed as a mixture. For the atomic-level understanding of the interaction of chelating groups with metal cations, DFT calculations were performed too.
  • Conference Object
    Citation - Scopus: 3
    Investigation of Lithium Sorption Efficiency Using Swcnt Functionalized Electrospun Fiber Mats From the Hypersaline Geothermal Brine
    (Trans Tech Publications, 2018) Çelik, Aslı; Topçu, Gökhan; Isık, Tuğba; Baba, Alper; Horzum, Nesrin; Demir, Mustafa Muammer
    Geothermal mining from brines becomes increasingly important with the increasing demand for rare earth elements in various engineering applications. Geothermal fluids contain valuable minerals and metals such as silica, zinc, lithium, and other materials that can be processed to recover these products. Solution mining by nature is challenging because of variable composition as well as the concentration of the interfering ions, particularly calcium and magnesium, and the presence of interfering ions increases the recovery costs requiring additional steps. The aim of this study is the fabrication of single-walled carbon nanotube functionalized electrospun chitosan, poly(methyl methacrylate) (PMMA), and polyacrylonitrile (PAN) fiber mats. Effect of polymer type, dilution factor, and surface modification on the sorption of lithium (Li+) ions was investigated. The maximum sorption performance was obtained with SWCNT functionalized PAN (15 wt%) fiber mats and they have sorption percentage as 55% at diluted (1/100) brine samples.
  • Article
    Citation - WoS: 13
    Citation - Scopus: 16
    Experimental Modeling of Silicate-Based Geothermal Deposits
    (Elsevier Ltd., 2017) Çelik, Aslı; Topçu, Gökhan; Baba, Alper; Akdoğan, Yaşar; Şentürk, Ufuk; Demir, Mustafa Muammer
    Scaling by metal silicates represents a major obstacle for geothermal systems. A composition that enables the fabrication of artificial deposits is necessary for the rapid testing of potential inhibitors. In this work, artificial deposits were synthesized by employing experimental conditions similar to those in the Tuzla Geothermal Field in Turkey. Although refluxing enabled the formation of a precipitate that was similar to naturally formed deposits in color and texture, their elemental composition and morphology showed a mismatch. An autoclave enabled the production of a precipitate that more closely resembled naturally formed deposits in color, texture, elemental composition, and structure.
  • Article
    Citation - WoS: 14
    Citation - Scopus: 20
    Design of Polymeric Antiscalants Based on Functional Vinyl Monomers for (fe, Mg) Silicates
    (American Chemical Society, 2017) Topçu, Gökhan; Çelik, Aslı; Baba, Alper; Demir, Mustafa Muammer
    Silica/silicate scaling is one of a few detrimental problems that cause high economical loss in the geothermal and petroleum fields. The prevention of silica/silicate has been attempted using antiscalants with functional groups, particularly -NH2; however, metal silicates are commonly found in the fields, and the antiscalants developed thus far are not effective against these compounds. In this work, polymeric antiscalants have been developed by merging two or more functional comonomers consisting of various chelating groups for metal cations. Homo- and copolymers of acrylamide (AM), the sodium salt of vinyl sulfonic acid (VSA), and vinyl phosphonic acid (VPA) were synthesized to examine their antiscaling performance against metal silicate scaling. Lab-scale metal silicates were obtained in a pressured autoclave reactor. The antiscalants were tested at various dosages (25, 50, and 100 ppm), and their effects were investigated from the leftover decantates after isolation of the solid precipitates. The polymeric antiscalants were found to be particularly effective against metal silicates and ineffective against simple silica precipitates. Acidic groups may be coordinating the metal cations, which prevents the formation of precipitates. Among these acidic comonomers, VSA-containing polymers, in particular, increased the solubility of metal silicates.