Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
282 results
Search Results
Now showing 1 - 10 of 282
Erratum Correction To: Assessing the Spatial and Temporal Characteristics of Meteorological Drought in Afghanistan (Pure and Applied Geophysics, (2024), 10.1007/S00024-024-03578-x)(Birkhauser, 2025) Tayfur, G.; Hayat, E.; Safari, M.J.S.Correct affiliations of Mir Jafar Sadegh Safari should only include the following: Department of Geography and Environmental Studies, Toronto Metropolitan University, Toronto, Ontario, Canada Department of Civil Engineering, Yaşar University, Izmir, Turkey Department of Geography and Environmental Studies, Toronto Metropolitan University, Toronto, Ontario, Canada Department of Civil Engineering, Yaşar University, Izmir, Turkey The original article has been corrected. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2024.Article Citation - Scopus: 1Anomalous Crustal Structure Beneath the Örenli-Eğiller Depression Zone, Inferred From Magnetotelluric Studies, Western Anatolia, Türkiye(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2024) Chandrasekharam, Dornadula; Raju, K.; Subba Rao, P.B.V.; Baba, AlperIn Türkiye, the prevalence of high radiogenic granites makes them ideal locations for initiating enhanced geothermal system (EGS) projects. One such occurrence of these granites is observed in the Kozak area of the Bergama region. To assess the energy potential of this site, a magnetotelluric (MT) survey was conducted, focusing on determining the depth distribution of the intrusive granite. The survey employed dimensionality analysis, utilizing Bahr skew and phase tensor analyses that denote a 2D subsurface nature up to 100 s and beyond that a 3D nature. In the present study, we interpreted MT data up to 100 s. The data collected, including rotated impedance tensors and tippers, were inverted using a nonlinear conjugate gradient algorithm integrated into the MT interpretation software of the WinG Link 2D inversion data modeling package. Multiple homogeneous half-space initial models were tested during the 2D inversion process. The findings indicate the existence of a midcrustal conductor associated with graphites and iron sulfides in the source region. This conductivity may be attributed to processes such as exsolution of metamorphic fluids, influx of mantle sources, or the entry of magmatic fluids through transcrustal fault zones. The findings indicate that the intrusive granite was emplaced along a NE–SW major fault, penetrating shallow crustal levels. The depth of this granite intrusion is determined to be 15 km, covering an outcrop area of 60 km². This detailed geological information allows a comprehensive assessment of the power-generating capacity of the intrusive granite. The results of this investigation contribute valuable insights for the development and optimization of Enhanced Geothermal System (EGS) projects in the region. © 2024, TUBITAK. All rights reserved.Article Citation - WoS: 18Citation - Scopus: 18In-Depth Exploration of Temperature Trends in Morocco: Combining Traditional Methods of Mann Kendall With Innovative Ita and Ipta Approaches(Springer Basel Ag, 2024) Qadem, Zohair; Tayfur, GökmenThis study examines trends in minimum and maximum temperatures at various climate stations located in different regions of Morocco for a period of five decades (1970 to 2019). Mann-Kendall, Sen's estimator, Innovative Trend Analysis (ITA) and Innovative Polygon Trend Analysis (IPTA) were used in the analysis. The results show significant fluctuations, at different time scales, between minimum and maximum temperatures at all stations. In coastal areas, such as Rabat Sale, minimum temperatures fell during January and February while other months saw increases. Average minimum temperatures in Rabat Sale tend to fall by 0.5 degree celsius. On the other hand, maximum temperatures in Rabat Sale rose by 0.2 degrees C. A decrease of 0.4 degree celsius for T-min and 1.6 degree celsius for T-max were observed in higher continental regions, such as Meknes. Other stations, such as Fez Sais (0.6 degree celsius T-min and 2.6 degree celsius T-max) and Taza (1.1 degree celsius T-min and 2.6 degree celsius T-max) showed an upward trend. Trends also vary, with notable increases in minimum and maximum temperatures, indicating different climatic dynamics according to altitude and locality. In particular, the ITA highlights a significant increase in annual maximum temperatures, with a P-value < 0.05 and trend slopes ranging from 0.0015 degree celsius per year in Rabat Sale to 0.0076 degree celsius per year in Taza. In addition, the IPTA results confirm diversity of upward and downward trends on monthly and seasonal scales, highlighting impact of geographical factors such as proximity to sea, topography, and continentality that contribute to formation of regional microclimates. The results highlight significant impact of climate change in Morocco.Review Citation - WoS: 19Citation - Scopus: 22Water Dams: From Ancient To Present Times and Into the Future(MDPI, 2024) Angelakis, Andreas N.; Baba, Alper; Valipour, Mohammad; Dietrich, Jorg; Fallah-Mehdipour, Elahe; Krasilnikoff, Jens; Ahmed, Abdelkader T.Since ancient times, dams have been built to store water, control rivers, and irrigate agricultural land to meet human needs. By the end of the 19th century, hydroelectric power stations arose and extended the purposes of dams. Today, dams can be seen as part of the renewable energy supply infrastructure. The word dam comes from French and is defined in dictionaries using words like strange, dike, and obstacle. In other words, a dam is a structure that stores water and directs it to the desired location, with a dam being built in front of river valleys. Dams built on rivers serve various purposes such as the supply of drinking water, agricultural irrigation, flood control, the supply of industrial water, power generation, recreation, the movement control of solids, and fisheries. Dams can also be built in a catchment area to capture and store the rainwater in arid and semi-arid areas. Dams can be built from concrete or natural materials such as earth and rock. There are various types of dams: embankment dams (earth-fill dams, rock-fill dams, and rock-fill dams with concrete faces) and rigid dams (gravity dams, rolled compacted concrete dams, arch dams, and buttress dams). A gravity dam is a straight wall of stone masonry or earthen material that can withstand the full force of the water pressure. In other words, the pressure of the water transfers the vertical compressive forces and horizontal shear forces to the foundations beneath the dam. The strength of a gravity dam ultimately depends on its weight and the strength of its foundations. Most dams built in ancient times were constructed as gravity dams. An arch dam, on the other hand, has a convex curved surface that faces the water. The forces generated by the water pressure are transferred to the sides of the structure by horizontal lines. The horizontal, normal, and shear forces resist the weight at the edges. When viewed in a horizontal section, an arch dam has a curved shape. This type of dam can also resist water pressure due to its particular shape that allows the transfer of the forces generated by the stored water to the rock foundations. This article takes a detailed look at hydraulic engineering in dams over the millennia. Lessons should be learned from the successful and unsuccessful applications and operations of dams. Water resource managers, policymakers, and stakeholders can use these lessons to achieve sustainable development goals in times of climate change and water crisis.Article Citation - WoS: 6Citation - Scopus: 9Holistic Managements of Textile Wastewater Through Circular, Greener and Eco-Innovative Treatment Systems Developed by Minimal To Zero Liquid Discharge(Elsevier, 2024) Aydıner, Coşkun; Doğan, Esra Can; Mert, Berna Kiril; Pala, Burcu; Demirozlu, Tugba Nur; Balcı, Esin; Narci, Ali OguzhanNew pragmatic and viable solutions to reduce or prevent discharge and to protect reserves are currently among the top-prioritised research for cleaner, circular, and resource-efficient use of industrial waters. So, the development of eco-sustainable water management is essential for green industrial development that will meet versatile and eco-sensitive regulatory standards, especially in water-intensive industries. Textile wastewater was reclaimed in semi to fully closed loops for minimal to zero liquid discharge. Concentrate-mixed wastewater was steadily treated in a hybrid membrane oxidation reactor at 60-80 % synergistic performances with remarkable UF fluxes of 96.4-820 L/m2h without any sludge discharge. Effluent was purified with 90-100 % removals and 20-80 L/m2h in nanofiltration and reverse osmosis. Due to Fenton-specific operation, more handling by ion exchange and neutralisation required to harvest membrane reuse waters and reactor discharge effluents with guaranteed Fe and pH. All-in-one system simulations indicated that high quality reuse waters are produced by 99.9 % efficiency and 98 and 100 % savings in iron and acid but 20-51 % more oxidant through concentrate recycling and regenerant reuse. It was also revealed that reactor effluents can be released to the sea or conventional biological treatment or can be eco-sustainably exploited for in-situ chemical and ex-situ bio-induced recovery of vivianite. This research demonstrates that how textile wastewater can be managed holistically by liquid discharge approaches from 50 % minimal to 99.9 % zero just in two-step, i.e. pretreatment and preconcentration, with consumable minimisation and valuable waste recovery through the eco-innovative systems which are developed as circular, greener, and sludge-free compatible with sustainable development goals.Article Citation - Scopus: 2Application of Endurance Time Method in Seismic Assessment of Rc Frames Designed by Direct Displacement-Based Procedure(Turkish Chamber of Civil Engineers, 2024) Karımzada, Nisar Ahmad; Shırkhanı, Amir; Aktaş, EnginThis paper addresses the Direct Displacement-Based Design (DDBD) approach of multi-story RC frame structures consistent with changes to design criteria between Turkish earthquake codes of TSC-2007 and TBEC-2018. The corresponding response modification factor (R) of structures designed based on the DDBD approach is also estimated in this research. The design base shear forces of both codes are compared considering different R factors and also with that of the DDBD approach. The results showed that the DDBD approach, as per TBEC-2018, provides RC frame structures with higher R values compared to the similar approach in accordance with TSC-2007. The Endurance Time (ET) method is a time history-based procedure for seismic assessment of structures under intensifying dynamic excitations aided to judge their performance at various intensity levels. Since, up to now, the ET method has not been considered to evaluate the performance of the structures designed by the DDBD approach, this paper addresses this issue. The ET performance curves of RC frames show that structures designed by the DDBD approach in accordance with TBEC-2018 exhibit higher Interstory Drift Ratios (IDRs) values than TSC-2007 at various hazard levels.Article Citation - WoS: 38Citation - Scopus: 43Quantitative Evaluation of the Damage To Rc Buildings Caused by the 2023 Southeast Turkey Earthquake Sequence(SAGE Publications, 2024) Pujol, Santiago; Bedirhanoğlu, İdris; Dönmez, Cemalettin; Dowgala, Jeffrey D.; Eryılmaz Yıldırım, Meltem; Klaboe, Kari; Köroğlu, Fahri Baran; Lequesne, Rémy D.; Öztürk, Baki; Pledger, Liam; Sönmez, EgemenData from 15 earthquakes that occurred in 12 different countries are presented showing that, without better drift control, structures built with building codes allowing large seismic drifts are likely to keep leaving a wide wake of damage ranging from cracked partitions to building overturning. Following the earthquake sequence affecting southeast Turkey in 2023, a team led by Committee 133 of the American Concrete Institute surveyed nearly 250 reinforced concrete buildings in the area extending from Antakya to Malatya. Buildings ranging from 2 to 16 stories were surveyed to assess their damage and evaluate the robustness of their structures in relation to overall stiffness, as measured by the relative cross-sectional areas of structural walls and columns. The majority of the buildings were estimated to have been built in the past 10 years. Yet, the structures surveyed were observed to have amounts of structural walls and columns comparable with amounts reported after the Erzincan (1992), Duzce (1999), and Bingol (2003) Earthquakes in Turkey. These amounts are, on average, much smaller than the wall and column amounts used in Chile and Japan. Because of that lack of robustness and given the intensities of the motions reported from Antakya to Malatya (with 10 stations with peak ground velocity (PGV) of 100 cm/s or more), it is concluded that structures in this region experienced large drifts. Excessive drift (1) exposed a myriad of construction and detailing problems leading to severe structural damage and collapse, (2) induced overturning caused by p-delta for some buildings, and (3) caused widespread damage to brittle masonry partitions. The main lesson is simple: ductility is necessary but not sufficient. It is urgent that seismic drift limits are tightened in high-seismicity regions worldwide. © The Author(s) 2024.Article Citation - WoS: 1Citation - Scopus: 2Geothermal Power Corridor-Connecting the Middle East Countries(Maden Tetkik ve Arama Genel Mudurlugu-mta, 2023) Chandrasekharam, DornadulaThe Middle East economy and life depend on imports, be it food, water, or energy, despite each country in the region having enormous energy resources to exploit and reduce dependency on countries outside the region and develop a socioeconomic model of regional cooperation and synergy. An estimated 371 TWh of electricity available from geothermal energy resources can be utilized by these countries to support basic needs and be free from food-energy-water imports by sharing their energy resources. The total amount of CO2 emissions from these countries is currently 945 x 106 kg, so these countries can further earn about 92 million euros from carbon savings, by using geothermal energy along this corridor. This amount can be utilized for augmenting the energy supply from geothermal sources. In this work, the available geothermal resources are evaluated, and suggestions are made how this energy can be best utilized for peaceful existence and cooperation in the region.Article Citation - WoS: 7Citation - Scopus: 7Investigating the Effects of Pa66 Electrospun Nanofibers Layered Within an Adhesive Composite Joint Fabricated Under Autoclave Curing(American Chemical Society, 2023) Esenoğlu, Gözde; Tanoğlu, Metin; Barışık, Murat; İplikçi, Hande; Yeke, Melisa; Nuhoğlu, Kaan; Türkdoğan, Ceren; Martin, Seçkin; Aktaş, Engin; Dehneliler, Serkan; Gürbüz, Ahmet Ayberk; İriş, Mehmet ErdemEnhancing the performance of adhesively joined composite components is crucial for various industrial applications. In this study, polyamide 66 (PA66) nanofibers produced by electrospinning were coated on unidirectional carbon/epoxy prepregs to increase the bond strength of the composites. Carbon/epoxy prepregs with/without PA66 nanofiber coating on the bonding region were fabricated using the autoclave, which is often used in the aerospace industry. The single lap shear Charpy impact energy and Mode-I fracture toughness tests were employed to examine the effects of PA66 nanofibers on the mechanical properties of the joint region. Scanning electron microscopy (SEM) was used to investigate the nanofiber morphology and fracture modes. The thermal characteristics of Polyamide 66 nanofibers were explored by using differential scanning calorimetry (DSC). We observed that the electrospun PA66 nanofiber coating on the prepreg surfaces substantially improves the joint strength. Results revealed that the single lap shear and Charpy impact strength values of the composite joint are increased by about 79 and 24%, respectively, by coating PA66 nanofibers onto the joining region. The results also showed that by coating PA66 nanofibers, the Mode-I fracture toughness value was improved by about 107% while the glass transition temperature remained constant.Review Citation - WoS: 3Citation - Scopus: 3Evolution of Tunneling Hydro-Technology: From Ancient Times To Present and Future(MDPI, 2023) Angelakis, Andreas N.; Passchier, Cees W.; Valipour, Mohammad; Krasilnikoff, Jens A.; Tzanakakis, Vasileios A.; Ahmed, Abdelkader T.; Baba, Alper; Kumar, Rohitashw; Capodaglio, Andrea G.; Dercas, Nicholas; Bilgiç, EsraWater tunnels are one of the oldest hydro-technologies for extracting water resources and/or transmitting them through water distribution systems. In the past, human societies have used tunneling for various purposes, including development, as a measure to enable underground resource extraction and the construction of transportation networks in challenging landscapes and topographies. The development of hydro-technology potentially involves the construction of tunnels to feed aqueducts, irrigation and waste water systems. Thus, the ability to make and maintain tunnels became an important component in creating lasting and sustainable water systems, which increased water supply and security, minimized construction costs, and reduced environmental impact. Thus, this review asks how, when and why human societies of the past included tunneling for the development of lasting water supply systems. This review presents a comprehensive overview across time and space, covering the history of tunneling in hydro technology from antiquity to the present, and it ponders how past experiences could impact on future hydro-technological projects involving tunneling. A historical review of tunnel systems enhances our understanding of the potential, performance, challenges, and prospects associated with the use of hydro-techniques. In the past, as the different examples in time and space demonstrate, tunneling was often dedicated to solving local problems of supply and disposal. However, across the world, some features were repeated, including the need for carving through the living rock or digging to create tunnels covered with stone slabs. Also, the world-wide use of extensive and costly tunnel systems indicates the high level of investment which human societies are willing to make for securing control over and with its water resources. This study helps us to gather inspiration from proven technologies of the past and more recent knowledge of water tunnel design and construction. As we face global warming and its derivate problems, including problems of water scarcity and flooding, the ability to create and maintain tunnels remains an important technology for the future.