Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
6 results
Search Results
Now showing 1 - 6 of 6
Review Citation - WoS: 19Citation - Scopus: 22Water Dams: From Ancient To Present Times and Into the Future(MDPI, 2024) Angelakis, Andreas N.; Baba, Alper; Valipour, Mohammad; Dietrich, Jorg; Fallah-Mehdipour, Elahe; Krasilnikoff, Jens; Ahmed, Abdelkader T.Since ancient times, dams have been built to store water, control rivers, and irrigate agricultural land to meet human needs. By the end of the 19th century, hydroelectric power stations arose and extended the purposes of dams. Today, dams can be seen as part of the renewable energy supply infrastructure. The word dam comes from French and is defined in dictionaries using words like strange, dike, and obstacle. In other words, a dam is a structure that stores water and directs it to the desired location, with a dam being built in front of river valleys. Dams built on rivers serve various purposes such as the supply of drinking water, agricultural irrigation, flood control, the supply of industrial water, power generation, recreation, the movement control of solids, and fisheries. Dams can also be built in a catchment area to capture and store the rainwater in arid and semi-arid areas. Dams can be built from concrete or natural materials such as earth and rock. There are various types of dams: embankment dams (earth-fill dams, rock-fill dams, and rock-fill dams with concrete faces) and rigid dams (gravity dams, rolled compacted concrete dams, arch dams, and buttress dams). A gravity dam is a straight wall of stone masonry or earthen material that can withstand the full force of the water pressure. In other words, the pressure of the water transfers the vertical compressive forces and horizontal shear forces to the foundations beneath the dam. The strength of a gravity dam ultimately depends on its weight and the strength of its foundations. Most dams built in ancient times were constructed as gravity dams. An arch dam, on the other hand, has a convex curved surface that faces the water. The forces generated by the water pressure are transferred to the sides of the structure by horizontal lines. The horizontal, normal, and shear forces resist the weight at the edges. When viewed in a horizontal section, an arch dam has a curved shape. This type of dam can also resist water pressure due to its particular shape that allows the transfer of the forces generated by the stored water to the rock foundations. This article takes a detailed look at hydraulic engineering in dams over the millennia. Lessons should be learned from the successful and unsuccessful applications and operations of dams. Water resource managers, policymakers, and stakeholders can use these lessons to achieve sustainable development goals in times of climate change and water crisis.Review Citation - WoS: 3Citation - Scopus: 3Evolution of Tunneling Hydro-Technology: From Ancient Times To Present and Future(MDPI, 2023) Angelakis, Andreas N.; Passchier, Cees W.; Valipour, Mohammad; Krasilnikoff, Jens A.; Tzanakakis, Vasileios A.; Ahmed, Abdelkader T.; Baba, Alper; Kumar, Rohitashw; Capodaglio, Andrea G.; Dercas, Nicholas; Bilgiç, EsraWater tunnels are one of the oldest hydro-technologies for extracting water resources and/or transmitting them through water distribution systems. In the past, human societies have used tunneling for various purposes, including development, as a measure to enable underground resource extraction and the construction of transportation networks in challenging landscapes and topographies. The development of hydro-technology potentially involves the construction of tunnels to feed aqueducts, irrigation and waste water systems. Thus, the ability to make and maintain tunnels became an important component in creating lasting and sustainable water systems, which increased water supply and security, minimized construction costs, and reduced environmental impact. Thus, this review asks how, when and why human societies of the past included tunneling for the development of lasting water supply systems. This review presents a comprehensive overview across time and space, covering the history of tunneling in hydro technology from antiquity to the present, and it ponders how past experiences could impact on future hydro-technological projects involving tunneling. A historical review of tunnel systems enhances our understanding of the potential, performance, challenges, and prospects associated with the use of hydro-techniques. In the past, as the different examples in time and space demonstrate, tunneling was often dedicated to solving local problems of supply and disposal. However, across the world, some features were repeated, including the need for carving through the living rock or digging to create tunnels covered with stone slabs. Also, the world-wide use of extensive and costly tunnel systems indicates the high level of investment which human societies are willing to make for securing control over and with its water resources. This study helps us to gather inspiration from proven technologies of the past and more recent knowledge of water tunnel design and construction. As we face global warming and its derivate problems, including problems of water scarcity and flooding, the ability to create and maintain tunnels remains an important technology for the future.Review Citation - WoS: 42Citation - Scopus: 49Utilization of Waste Materials in the Stabilization of Expansive Pavement Subgrade: an Extensive Review(Elsevier, 2023) Tanyıldızı, Muhammed; Uz, Volkan Emre; Gökalp, İslamExpansive soils, also known as swell-shrink soils, are one of the most problematic soils in highway construction and exhibit significant volume changes by swelling and shrinking while wet and dry, respectively. These changes in soil cause cracks, heaves, differential settlements, and damages to the overlying pavements leading to high maintenance costs. The annual average maintenance cost of structures built on expansive soils ranges from $9 to $15 billion, with 50% of the expenses associated with highways and streets. Chemical stabilization techniques such as cement and lime stabilization are one of the most efficient ways to treat expansive soils. However, there is a need to develop environmentally friendly approaches to stabilize expansive soils due to worldwide growing interest in sustainable developments and concerns about greenhouse gas emissions and climate change. In this context, using waste materials in soil stabilization has been considered an important issue for sustainability concerns. The aim of the current study is to review the relevant studies performed to improve the geotechnical and engineering properties of expansive subgrade soils of pavements by using waste materials arising from industrial, agricultural, and other activities in the last decade. In the organization of this study, characteristics of expansive soils including plasticity, compaction, strength & stiffness, microstructural characteristics, shrink-swell properties, and durability were focused to point out the effect of the waste materials. The overall results obtained throughout the scope of the current study indicated that the use of waste materials in soil stabilization improves the engineering properties of expansive soils, significantly. This paper also provides key information and creates awareness for researchers and sector representatives about sustainable soil stabilization.Review Citation - WoS: 14Citation - Scopus: 25Sustainability of Water, Sanitation, and Hygiene: From Prehistoric Times To the Present Times and the Future(MDPI, 2023) Angelakis, Andreas N.; Capodaglio, Andrea G.; Passchier, Cees W.; Valipour, Mohammad; Krasilnikoff, Jens; Tzanakakis, Vasileios A.; Suermelihindi, Guel; Baba, AlperContaminated water and poor sanitation are associated with disease transmission. Absent, inadequate, or improperly managed water resources and sanitation systems expose individuals to preventable health risks. Billions of people lack access to these basic services today and will remain in this condition for decades to come. As we are usually thinking and talking about water, sanitation and hygiene services have changed. Looking back at the history of water, sanitation, and hygiene can help us understand the challenges and opportunities of these issues and draw lessons to achieve sustainable development in the future. Throughout history, civilizations have successfully experimented with treating water and using it for drinking, sanitation, and agriculture. For example, the Minoan civilizations originally focused on water treatment and cleaning to improve the aesthetic properties of drinking water. During prehistoric times, Minoan and Indus Valley civilizations, dating back to about 2000 BC, were the first to focus on the treatment of water supplies. From the early Minoan period, they relied on rainwater collection. During historic times, Hippocrates was the first to invent and used a water filter in the form of a cloth bag, at about 400 BC, known today as the Hippocrates Sleeve. The Romans perfected existing water technologies on a larger scale and initiated their spread throughout the Empire. Hygiene in ancient Rome was promoted by the famous public baths and toilets, which were supplied with water through widely branched aqueducts that had a high standard of cleanliness for the time and were regularly maintained.Review Citation - WoS: 25Citation - Scopus: 35Evolution of Floods: From Ancient Times To the Present Times (ca 7600 Bc To the Present) and the Future(MDPI, 2023) Angelakis, Andreas N.; Capodaglio, Andrea G.; Valipour, Mohammad; Krasilnikoff, Jens; Ahmed, Abdelkader T.; Mandi, Laila; Tzanakakis, Vasileios A.; Kumar, Rohitashw; Min, Zhang; Han, Mooyoung; Bashiru, Turay; Derkas, Nicholas; Baba, Alper; Bilgiç, EsraFloods are one of the most dangerous natural disasters, causing great destruction, damage, and even fatalities worldwide. Flooding is the phenomenon of a sudden increase or even slow increase in the volume of water in a river or stream bed as the result of several possible factors: heavy or very long precipitation, melting snowpack, strong winds over the water, unusually high tides, tsunamis, or the failure of dams, gages, detention basins, or other structures that hold back water. To gain a better understanding of flooding, it is necessary to examine evidence, search for ancient wisdom, and compare flood-management practices in different regions in a chronological perspective. This study reviews flood events caused by rising sea levels and erratic weather from ancient times to the present. In addition, this review contemplates concerns about future flood challenges and possible countermeasures. Thus, it presents a catalogue of past examples in order to present a point of departure for the study of ancient floods and to learn lessons for preparation for future flood incidents including heavy rainfalls, particularly in urbanized areas. The study results show that ancient societies developed multifaceted technologies to cope with floods and many of them are still usable now and may even represent solutions and measures to counter the changing and increasingly more erratic weather of the present.Review Citation - WoS: 3Citation - Scopus: 3Wave Overtopping at Sea Dikes on Shallow Foreshores: a Review, an Evaluation, and Remaining Challenges(MDPI, 2023) Özyurt Tarakçıoğlu, Gülizar; Kısacık, Doğan; Gruwez, Vincent; Troch, PeterWave overtopping is a critical parameter in the design of coastal defense structures. Nowadays, several empirical formulations based on small-scale experiments are available in the literature to predict the mean overtopping discharge at dikes on shallow foreshores. Although the accuracy of the predictions has improved due to each approach's contributions, the formulations' performance depends on their range of applicability. In engineering applications, it is important to know the performance and limitations of the different formulas. This work presents a new experimental dataset focused on very shallow and extremely shallow foreshore conditions for a range of foreshore slopes (i.e., 1/20, 1/35, 1/50, and 1/80) and relative water depths. The recent developments in wave overtopping research on very shallow and extremely shallow foreshore conditions have been reviewed using this dataset to reflect the existing uncertainties and challenges in the wave-overtopping literature. We find that predicting wave overtopping for extremely shallow foreshore conditions still requires improvement. Additional research is needed to understand the (residual) influence on the wave overtopping of the foreshore slope and relative magnitude of the infragravity wave height to the sea-swell wave height at the dike toe, especially for extremely shallow foreshore conditions. The variation in performance of the formulas for different foreshore slopes is demonstrated. Finally, some of the remaining uncertainties that need further exploration are discussed.