WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
23 results
Search Results
Article Citation - WoS: 101Citation - Scopus: 105Defect-Engineering Agsbte2 With High Thermoelectric Performance(Wiley, 2023) Zhang, Yu; Li, Zhi; Singh, Saurabh; Nozariasbmarz, Amin; Li, Wenjie; Genç, Aziz; Xia, YiThermoelectric (TE) generators enable the direct and reversible conversion between heat and electricity, providing applications in both refrigeration and power generation. In the last decade, several TE materials with relatively high figures of merit (zT) have been reported in the low- and high-temperature regimes. However, there is an urgent demand for high-performance TE materials working in the mid-temperature range (400–700 K). Herein, p-type AgSbTe2 materials stabilized with S and Se co-doping are demonstrated to exhibit an outstanding maximum figure of merit (zTmax) of 2.3 at 673 K and an average figure of merit (zTave) of 1.59 over the wide temperature range of 300–673 K. This exceptional performance arises from an enhanced carrier density resulting from a higher concentration of silver vacancies, a vastly improved Seebeck coefficient enabled by the flattening of the valence band maximum and the inhibited formation of n-type Ag2Te, and ahighly improved stability beyond 673 K. The optimized material is used to fabricate a single-leg device with efficiencies up to 13.3% and a unicouple TE device reaching energy conversion efficiencies up to 12.3% at a temperature difference of 370 K. These results highlight an effective strategy to engineer high-performance TE material in the mid-temperature range.Article Citation - WoS: 21Citation - Scopus: 23Engineering of Xylanases for the Development of Biotechnologically Important Characteristics(Wiley, 2023) Sürmeli, Yusuf; Şanlı Mohamed, GülşahXylanases are the main biocatalysts used for the reduction of the xylan backbone from hemicellulose, randomly splitting off β-1,4-glycosidic linkages between xylopyranosyl residues. Xylanase market has been annually estimated at 500 million US Dollars and they are potentially used in broad industrial process ranges such as paper pulp biobleaching, xylo-oligosaccharide production, and biofuel manufacture from lignocellulose. The highly stable xylanases are preferred in the downstream procedure of industrial processes because they can tolerate severe conditions. Almost all native xylanases can not endure adverse conditions thus they are industrially not proper to be utilized. Protein engineering is a powerful technology for developing xylanases, which can effectively work in adverse conditions and can meet requirements for industrial processes. This study considered state-of-the-art strategies of protein engineering for creating the xylanase gene diversity, high-throughput screening systems toward upgraded traits of the xylanases, and the prediction and comprehensive analysis of the target mutations in xylanases by in silico methods. Also, key molecular factors have been elucidated for industrial characteristics (alkaliphilic enhancement, thermal stability, and catalytic performance) of GH11 family xylanases. The present review explores industrial characteristics improved by directed evolution, rational design, and semi-rational design as protein engineering approaches for pulp bleaching process, xylooligosaccharides production, and biorefinery & bioenergy production.Article Citation - WoS: 29Citation - Scopus: 33The Effect of Heat Transfer Characteristics of Macromolecule Fouling on Heat Exchanger Surface: a Dynamic Simulation Study(Wiley, 2023) Karimi Shoar, Zahra; Pourpasha, Hadi; Zeinali Heris, Saeed; Mousavi, Seyed Borhan; Mohammadpourfard, MousaAt the city gate gas pressure reduction stations (CGSs), to prevent natural gas from forming a hydrate in the throttle valve, the natural gas is heated by the heater before reaching the pressure relief valve. Heat exchangers are an essential component of industrial processes that contribute significantly to total system energy. Since the element impacting heat exchanger performance is the fouling process, all fouling processes and models were dynamically simulated in this study. Through coding in the C++ language and simultaneous use of fluent functions, or, in other words, user-defined function (UDF), fouling-related models were defined for this software. The dynamic simulation was performed, and parameters such as fouling strength and layer thickness were calculated. The effects of changing operating conditions, such as gas inlet velocity, surface temperature, and fouling species concentration on fouling growth, were also evaluated. As the concentration of fouling species increased, the fouling rate also increased. The amount of supersaturation and fouling rate increased as the surface temperature increased. Due to the operational limitations of the system, to reduce the fouling rate, the gas inlet velocity should be as high as possible, and the fluid inlet temperature, surface temperature, and concentration of fouling species should be as low as possible. In this study, the required time to reach the efficiency of 70% of the heat exchanger was calculated using the modelling of this chamber, which was equivalent to 190 days. Additionally, the critical thickness of the fouling layer at this time was 3.5 cm.Article Citation - WoS: 1Citation - Scopus: 1Influence of Processing Method of Cocrmo Dental Alloy on the Corrosion Behavior in Artificial Saliva(Wiley, 2022) Pontes, Joana R.; Pinto, Ana M. P.; Ariza, Edith; Alves, Alexandra C.; Toptan, FatihRemovable or fixed dental frameworks are usually made of CoCr alloys. The CoCr dental alloys are produced traditionally by lost-wax casting. However, alternative processing routes, such as hot-pressing, are being studied for dental applications. The purpose of the present work was to assess the corrosion resistance of CoCrMo dental alloy produced by conventional lost-wax casting and hot-pressing. The corrosion behavior was studied in artificial saliva at 37°C by potentiodynamic polarisation tests. Immersion tests were performed to evaluate the growth of the passive film where electrochemical impedance spectroscopy was used at different immersion periods. Results showed slightly better corrosion resistance in terms of ipass for CoCrMo samples obtained by hot-pressing. On the other hand, the immersion tests showed a more stable and thicker passive film formed on hot-pressed CoCrMo dental alloy, pointing out that hot-pressing may be considered a promising technique to produce CoCrMo dental structures.Article Citation - WoS: 1Citation - Scopus: 2Preparation and Photocatalytic Performances of Zno Nanostructures: Effects of Anodization Voltage and Time(Wiley, 2022) Öksüz, Ahmet Emrecan; Yurddaşkal, Metin; Doluel, Eyyup Can; Kartal, Uğur; Dikici, TuncayIn this study, ZnO nanostructures with different morphologies were produced by varying anodizing parameters (time and voltage), and the photocatalytic activities of these structures were examined. ZnO nanostructures were fabricated through different voltage and duration consisting of nine samples with KHCO3 solution as an electrolyte. The produced ZnO nanostructures were investigated by using X-ray diffraction (XRD), scanning electron microscopy, X-ray photoelectron spectroscopy, and UV–vis spectrophotometer. It was found that the morphology of ZnO was formed as nanosponge, nanoflower, nanowire, heterogeneous structures. ZnO nanostructures were identified by matching XRD peaks due to the ICDD database. Experiments on photocatalytic degradation of methylene blue demonstrated the photocatalytic activity of ZnO samples. The best photocatalytic performance of the samples was observed by S1 sample, which was anodized for 30 min in 0.05 M of KHCO3 electrolyte at 20 V, after 420 min exposure of the UV–vis light source with the degradation rate of 87.3%. Such ZnO nanostructures exhibit unique properties and have high potential for wastewater treatment.Article Citation - WoS: 3Citation - Scopus: 3Structural and Functional Analyses of Gh51 Alpha-L of Geobacillus Vulcani Gs90 Reveal Crucial Residues for Catalytic Activity and Thermostability(Wiley, 2022) Sürmeli, Yusuf; Şanlı Mohamed, GülşahAlpha-L-arabinofuranosidase (Abf) is of big interest in various industrial areas. Directed evolution is a powerful strategy to identify significant residues underlying Abf properties. Here, six active variants from GH51 Abf of Geobacillus vulcani GS90 (GvAbf) by directed evolution were overproduced, extracted, and analyzed at biochemical and structural levels. According to the activity and thermostability results, the most-active and the least-active variants were found as GvAbf51 and GvAbf52, respectively. GvAbf63 variant was more active than parent GvAbf by 20% and less active than GvAbf51. Also, the highest thermostability belonged to GvAbf52 with 80% residual activity after 1 h. Comparative sequence and structure analyses revealed that GvAbf51 possessed L307S displacement. Thus, this study suggested that L307 residue may be critical for GvAbf activity. GvAbf63 had H30D, Q90H, and L307S displacements, and H30 was covalently bound to E29 catalytic residue. Thus, H30D may decrease the positive effect of L307S on GvAbf63 activity, preventing E29 action. Besides, GvAbf52 possessed S215N, L307S, H473P, and G476C substitutions and S215 was close to E175 (acid–base residue). S215N may partially disrupt E175 action. Overall effect of all substitutions in GvAbf52 may result in the formation of the C–C bond between C171 and C213 by becoming closer to each other.Article Citation - WoS: 2Citation - Scopus: 1Effects of Electrospraying Parameters on Deposition of La0.3sr0.7fe0.7cr0.3o3−δ Cathode Layer on Gdc(Wiley, 2022) Akkurt, Sedat; Sındıraç, Can; Özmen Egesoy, Tuğçe; Atıcı, Gökçe; Erişman, Elif; Erğen, Emre; Büyükaksoy, AligülHigh performance in intermediate temperature solid oxide fuel cells requires improvements especially in the microstructure of the cathode layer. New cobalt-free cathode materials are used because cobalt-containing cathodes have higher thermal expansion coefficients, poor long-term chemical stability, and lower mechanical stability. Recently cobalt-free cathodes have been proposed to solve these issues by using deposition methods other than electrospray deposition (ESD). In this study, ESD method is used to develop a cobalt-free cathode layer. The electrolyte layer is gadolinium-doped ceria that is deposited with La0.3Sr0.7Fe0.7 Cr0.3O3−δ (LSFCr) prepared by 2-butoxyethanol and ethylene glycol solvents as opposed to conventional solvents. Experimental ESD parameters are tested at different levels and combinations by applying statistical experimental design methods to optimize the microstructure. Coating deposited as such demonstrated higher electrochemical performance than similar electrodes fabricated by other methods.Article Citation - WoS: 2Citation - Scopus: 2Assessing Edible Composite Film Polymer From Potato Industry Effluent Under High Hydrostatic Pressure and Its Antimicrobial Properties(Wiley, 2022) Akdemir Evrendilek, Gülsün; Bulut, Nurullah; Uzuner, SibelDevelopment of edible film from potato industry effluent having antimicrobial properties against Salmonella enteritidis and Escherichia coli O157:H7 by addition of Citrus sinensis volatile oil (VO), and changes of its textural properties under high hydrostatic pressure (HHP) are investigated. The optimum operational conditions are determined as 500 MPa pressure, 36.97 µL VO, and 15 min processing time with the minimum force value of 372.33 × g. Textural properties are also modeled through empirical modeling, best fit Box-Behnken design, and artificial neuron network. Inhibition zones for Salmonella enteritidis and E. coli O157:H7 at the optimum HHP conditions are 1.50 ± 0.11 and 2.18 ± 0.07 cm, respectively. Textural properties of force and elongation at break of the HHP-processed films range from 2.27 ± 0.52 to 5.23 ± 0.38 N, and from 8.57 ± 1.31 to 13.36 ± 1.36 mm, respectively. Thermal transition of the edible film is observed at 87.42 °C for 7.36 min. Addition of C. sinensis VO improves the antimicrobial properties, whereas HHP improves the textural properties of the film. It is suggested that the developed film has potential to be used as an edible food packaging material.Article Citation - WoS: 5Citation - Scopus: 7Enhanced Temperature Uniformity With Minimized Pressure Drop in Electric Vehicle Battery Packs at Elevated C-Rates(Wiley, 2022) Güngör, Şahin; Çetkin, ErdalThe trend of transition from fossil fuel to electrification in transportation is a result of no carbon emission produced by electric vehicles (EVs) during their daily operations. Furthermore, the global carbon footprint of EVs can be minimized if the electricity is generated from renewable sources such as wind and solar. On the other hand, there are some drawbacks of these vehicles such as charging time being very long and the mileage range of vehicles not at the desired level. Battery cells are being charged at relatively high C-rates to eliminate these problems, yet high current rates accelerate the aging of batteries and capacity losses due to the generated heat. Generated heat causes overheating, and excess temperature triggers degradation and thermal runaway risks. This paper uncovers how the battery pack temperature uniformity and strict thermal control can be achieved with heat transfer enhancement by conduction (cold plates) and convection (vascular channels). We aimed to reduce the energy consumption of the EV battery pack system while increasing the thermal performance. The impact of the thermal contact resistance is also considered for many realistic scenarios. The results indicate that an integrated system with cold plates and vascular channels satisfies the temperature uniformity requirement (over 81%) with comparatively less pumping power (∼72%) of advanced electric vehicles for relatively high C-rates. Furthermore, findings show the temperature level can increase up to 4°C as thermal contact resistance increases. The proposed cooling technique, which has low cost, easy application, and lower energy consumption superiorities, can be implemented in palpable EV battery packs.Article Citation - WoS: 3Citation - Scopus: 4Microfluidic-Assisted Preparation of Nano and Microscale Chitosan Based 3d Composite Materials: Comparison With Conventional Methods(Wiley, 2022) Kimna, Ceren; Değer, Sibel; Tamburacı, Sedef; Tıhmınlıoğlu, FundaAlthough nanofillers contribute to improved physical characteristics and biological functionalities of polymer-based biomaterials, their dispersion in polymer matrices is still a challenging issue in terms of obtaining consistency for the inherent properties. To tackle this problem, homogenization techniques are applied to disperse the nanofillers in such polymers, however, these methods can cause undesired changes especially in the rheological properties and the physical structure of the biopolymer matrices. Recently, as a novel homogenization technique, microfluidization has been used to homogenize polymer nanocomposites to minimize these limitations. In this study, two different nanocomposite structures as chitosan/montmorillonite (CS/MMT) and chitosan/polyhedral oligomeric silsesquioxane nanocages (CS/POSS) were homogenized with microfluidization and investigated in terms of physical alterations. Furthermore, the effect of microfluidizer technique on material characteristics was compared with conventional homogenization techniques, i.e., ultrasonic bath and sonication in terms of solution, nano – (e.g., hydrodynamic size, drug encapsulation) and macroscopic material characteristics (e.g., porosity, mechanical properties, swelling and thermal degradation). It was found that the microfluidizer homogenization improves the physical characteristics in both nano and macroscale materials: Nanospheres obtained from CS/MMT composites showed enhanced stability, uniform size distribution (<100 nm, PDI: [removed]50%) whereas 3D porous CS/POSS scaffolds showed improved structural uniformity (i.e., homogeneous and interconnected microstructure) and enhanced thermal and mechanical properties. The obtained results indicate that the microfluidizer homogenization ensures a successful nanofiller dispersion in polymer matrices, thereby improving the biomaterial characteristics impressively compared to the sonication methods.
- «
- 1 (current)
- 2
- 3
- »