WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
56 results
Search Results
Article Citation - WoS: 10Citation - Scopus: 12Novel Hybrid Adsorption-Electrodialysis (aded) System for Removal of Boron From Geothermal Brine(American Chemical Society, 2022) Altınbaş, Bekir Fırat; Orak, Ceren; Ökten, Hatice Eser; Yüksel, AslıA novel hybrid adsorption-electrodialysis (AdED) system to remove environmentally harmful boron from geothermal brine was designed and effective operating parameters such as pH, voltage, and flow rate were studied. A cellulose-based adsorbent was synthesized from glycidyl methacrylate (GMA) grafted cellulose and modified with a boron selective n-methyl-d-glucamine (NMDG) group and characterized with SEM-EDX, FT-IR, and TGA analyses. Batch adsorption studies revealed that cellulose-based adsorbent showed a remarkable boron removal capacity (19.29 mg/g), a wide stable operating pH range (2-10), and an adsorption process that followed the Freundlich isotherm (R2= 0.95) and pseudo-second-order kinetics (R2= 0.99). In the hybrid AdED system, the optimum operating parameters for boron removal were found to be a pH of 10, a voltage of 10 V, a flow rate of 100 mL/min, and an adsorbent dosage of 4 g/L. The presence of the adsorbent in the hybrid system increased boron removal from real geothermal brine (containing 199 ppm boron) from 7.2% to 73.3%. The results indicate that the designed AdED system performs better than bare electrodialysis for boron removal from ion-rich real geothermal brine while utilizing environmentally friendly cellulose-based adsorbent.Article Citation - WoS: 18Citation - Scopus: 22Effect of Fomes Fomentarius Cultivation Conditions on Its Adsorption Performance for Anionic and Cationic Dyes(American Chemical Society, 2022) Henning, Laura M.; Simon, Ulla; Abdullayev, Amanmyrat; Schmidt, Bertram; Pohl, Carsten; Nunez Guitar, Tamara; Ahmetoğlu, Çekdar Vakıf; Meyer, Vera; Bekheet, Maged F.; Gurlo, AleksanderLab-cultivated mycelia of Fomes fomentarius (FF), grown on a solid lignocellulose medium (FF-SM) and a liquid glucose medium (FF-LM), and naturally grown fruiting bodies (FF-FB) were studied as biosorbents for the removal of organic dyes methylene blue and Congo red (CR). Both the chemical and microstructural differences were revealed using X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, zeta potential analysis, and scanning electron microscopy, illuminating the superiority of FF-LM and FF-SM over FF-FB in dye adsorption. The adsorption process of CR on FF-LM and FF-SM is best described by the Redlich-Peterson model with β constants close to 1, that is, approaching the monolayer Langmuir model, which reach maximum adsorption capacities of 48.8 and 13.4 mg g-1, respectively, in neutral solutions. Adsorption kinetics follow the pseudo-second-order model where chemisorption is the rate-controlling step. While the desorption efficiencies were low, adsorption performances were preserved and even enhanced under simulated dye effluent conditions. The results suggest that F. fomentarius can be considered an attractive biosorbent in industrial wastewater treatment and that its cultivation conditions can be specifically tailored to tune its cell wall composition and adsorption performance.Article Citation - WoS: 42Citation - Scopus: 44Boron Carbon Nitride Nanosheets in Water and Wastewater Treatment: a Critical Review(Elsevier, 2022) Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaThe availability and accessibility of clean and secure water supplies are pressing technological and scientific issues worldwide. As a result of global water constraints, wastewater treatment and reuse are being evaluated as feasible alternatives to fresh water for agricultural irrigation and domestic and industrial purposes. Boron carbon nitride (BCN) nanosheets have been studied intensively in the last decade in batteries, biosensors, and capacitors, and for use as catalysts, and they have recently been used in wastewater treatment. BCN materials, along with their synthesis processes, characteristics, and application areas in water and wastewater treatment, are discussed thoroughly in this paper. Additionally, synthesis processes for ternary BCN compounds, including chemical vapor deposition, ion beam-aided deposition, magnetron sputtering, and pulsed laser deposition, are described. BCN materials have also been explored because of their flexible electrical features, excellent mechanical strength, outstanding unreactivity, and significant stability, which make them appropriate for a range of severe environment applications. Thus, the use of BCN materials as photocatalysts and adsorbents and in electrochemical reduction and capacitive deionization are also discussed thoroughly. The highest ammonia production of 172,226.5 μg/h.mg.cat and faradic efficiency of 95.3% have been obtained using the BCN@Cu/CNT catalyst, whereas the ammonia production and FE values for metal-free BCN are 7.75 μg/h.mg.cat and 13.8%. Moreover, the maximum attained adsorption capacities of BCN nanosheets for Pb2+ and Hg2+ are 210 and 625 mg/g, respectively. Overall, this review indicates that essential work on BCN nanosheets is still needed. Future research should focus on the development of BCN nanostructures to encourage multidisciplinary research.Article Adsorpsiyon ile Virüslerin Giderilmesine İlişkin Bir İnceleme(Gazi Üniversitesi, 2021) Eren, Muhammet Şakir Abdullah; Tanaydın, Elif Sıla; Arslanoğlu, Hasan; Çiftçi, Harun2020 yılında Çin’in Hubei eyaletinin Vuhan şehrinden neredeyse tüm ülkelere yayılan Covid-19 (SARS-CoV-2 Enfeksiyonu)’un potansiyel tehlikeleri, dünya çapında bilim insanlarının ilgi odağı olmuştur. Covid-19’un pnömoniden ağır akut solunum yolu enfeksiyonlarına ve böbrek yetmezliğinden ölüme kadar uzanan ciddi etki süreçleri milyonlarca insan için tehdidini sürdürmektedir. Ortaya çıkan yeni viral enfeksiyonlarda uygun tedavi protokollerinin geliştirilmesi için pandemik türlerin izolasyonu büyük önem arz etmektedir. Bunun için yeni yöntemlerin yanında mevcut yöntemlerin de geliştirilmesi gereklidir. Virüsler doğada canlı formda bulunmazlar ve genetik materyalini aktarabilmek için başka canlılara ihtiyaç duyarlar. Ayrıca izole edilmiş yüzeylerde hızla inaktif hale getirilebilirler. Bu yönüyle su kaynakları ve hava en önemli iletim vasıtaları olarak karşımıza çıkmaktadır. Virüslerin yayılmasının önüne geçmede ve onları etkisiz hale getirmede iletim vasıtalarına yönelik adsorpsiyon işlemleri uygulanabilmektedir. Bu derlemede, virüslerin karbonlu, oksitli, gözenekli materyaller ve metal organik kafes yapıları içeren çeşitli adsorbanlarla etkileşimleri incelendi. Su ve hava arıtmasında kullanılan adsorbanların hedef türleri adsorplama işlemlerinde elektrostatik etkileşimlerin daha etkili olduğu belirlendi. Virüs yüzeyinin çeşitli organik fonksiyonel grupları taşıması nedeniyle farklı adsorbanlar ile elektrostatik etkileşime geçeceği ve bu şekilde de onların uzaklaştırılarak hem izole edilmesi hem de etkisiz hale getirilmesi mümkün görülmektedir. Çalışmamızın Koronavirüsler dahil diğer patojenlerin hava ve su kaynaklarına uygulanacak adsorpsiyon işlemleri ile yayılmalarının engellenmesine ve belirtilen iletim vasıtalarının dezenfekte edilmesine yönelik etkili çözümlere katkı sağlayacağını düşünmekteyiz.Article Citation - WoS: 68Citation - Scopus: 72Production of Microporous Cu-Doped Btc (cu-Btc) Metal-Organic Framework Composite Materials, Superior Adsorbents for the Removal of Methylene Blue (basic Blue 9)(Elsevier, 2020) Eren, Muhammet Şakir Abdullah; Arslanoğlu, Hasan; Çiftci, HarunCellulosic woven waste was used as a biomass material to prepare a Cu-doped BTC (Cu-BTC) adsorbent, which was then used to remove methylene blue (Basic Blue 9) from wastewater. Cellulosic woven waste was used as a biomass material to prepare a Cu-doped BTC (Cu-BTC) adsorbent, which was then used to remove methylene blue (Basic Blue 9) from wastewater. The Cu-BTC had higher adsorption capacity for methylene blue (BB9) than pure woven waste because it had high specific surface area and electrostatic interaction with cationic methylene blue molecules. The Cu-BTC removed methylene blue from wastewater rapidly and effectively and had an excellent adsorption capacity (197.90 mg/g). In batch process, the adsorption efficiency of the adsorbent for removal of BB9 was evaluated within 20 degrees C-60 degrees C, with initial BB9 concentrations of 50 - 200 mg/L and initial pH of 2 -11. The Cu-BTC activation tailored the topological and textural properties of the obtained adsorbent, leading to a relatively large surface area of 1418.3 m(2)/g and pores with a volume of 0.491 cm(3)/g and an average size of 2.11 nm. The adsorption process fitted well with the Langmuir isotherm and the pseudo-second-order kinetic model. The possible mechanism for methylene blue removal mainly involved electrostatic attraction and micro pores. This study can serve as a guide for value-added utilization of cellulosic woven waste and as a practical method for the removal of methylene blue from wastewater. Adsorption of methylene blue onto the CuBTC is an effective and eco-friendly method for its removal from wastewater.Article Citation - WoS: 3Validation on of Local Thermal Equilibrium and Uniform Pressure Assumptions for an Isobaric Adsorption Process in an Adsorbent Bed(Türk Isı Bilimi ve Tekniği Derneği, 2016) Gediz İliş, Gamze; Mobedi, Moghtada; Ülkü, SemraBu çalışmanın amacı, adsorbent yatakta ısı ve kütle transferini analiz etmek için kullanılan yerel ısıl denge ve sabit basınç yaklaşımı varsayımların geçerliliğini araştırmaktır. İçerisinde silika jel partikülleri içeren bir yatak ile su kabı olan bir deney düzeneği tasarlanmış ve adsorpsiyon sürecinde yatağın içinde farklı yerlerde yerel sıcaklık ve basınç ölçülmüştür. Ayrıca, sabit basınç yaklaşımı ve yerel ısıl denge varsayımlara dayalı ısı ve kütle transferi denklemleri çözülmüştür. Sayısal sonuçlar, ilgili deneysel sonuçlarla karşılaştırılmış ve aralarında oldukça iyi bir uyum tespit edilmiştir. Gerçekleştirilen karşılaştırmaya dayanarak, incelenen yatak için iki önemli sonuç şu şekildedir: a) katı madde ve su buharı arasında yerel ısıl denge bulunmaktadır, b) bir yatak içinde parçacıklar arası kütle transferi direnci ihmal edilebilir düzeyde olup konsantrasyonunun ve sıcaklığın belirlenmesi için sabit basınç yaklaşımı geçerlidir. Ayrıca, bu çalışmada sunulan deneysel sonuçlar diğer araştırmacıların sayısal çalışmalarının geçerliliğini doğtulamak için değerli veriler sağlayacaktır.Article Citation - WoS: 13Citation - Scopus: 13Application of Work Function Measurements in the Study of Surface Catalyzed Reactions on Rh(1 0 0)(Taylor & Francis, 2018) Çağlar, Başar; Kızılkaya, Ali Can; Niemantsverdriet, J. W. (Hans); Weststrated, C. J. (Kees-Jan)The present article aims to show how work function measurements (WF) can be applied in the study of elementary surface reaction steps on metallic single crystal surfaces. The work function itself can in many cases not be interpreted directly, as it lacks direct information on structural and chemical nature of the surface and adsorbates, but it can be a powerful tool when used together with other surface science techniques which provide information on the chemical nature of the adsorbed species. We here, illustrate the usefulness of work function measurements using Rh(100) as our model catalyst. The examples presented include work function measurements during adsorption, surface reaction, and desorption of a variety of molecules relevant for heterogeneous catalysis. Surface coverage of adsorbates, isosteric heat of adsorption, and kinetic parameters for desorption, desorption/decomposition temperatures of surface species, different reaction regimes were determined by WF with the aid of other surface science techniques.Article Citation - WoS: 104Citation - Scopus: 107Poly(dopamine) Grafted Bio-Silica Composite With Tetraethylenepentamine Ligands for Enhanced Adsorption of Pollutants(Institution of Chemical Engineers, 2019) Arıca, Tuğçe Aybüke; Kuman, Merve; Gerçel, Özgül; Ayas, ErhanIn this study, diatomite fossil particles (i.e., bio-silica) was treated with strong acid solution and coated with polydopamine (bio-silica-PDA) using aqueous-based bioinspired coating method. The bio-silica-PDA was grafted with tetraethylenepentamine (TEPA) ligand to increase binding sites on the material surfaces. The biosilica-PDA-TEPA particles was characterized using Fourier-transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM), X-Ray Diffraction (XRD) and Brunauer-Emmett-Teller (BET) method. The adsorption performance of the biosilica-PDA-TEPA particles was studied using a model dye (i.e., Direct Blue 74; DB-74) from aqueous solutions using biosilica-PDA as a control system. Batch system was used to optimize experimental conditions for the removal of DB-74 dye on the sorbents. The adsorption of DB-74 on the biosilica-PDA-TEPA particles was studied in the pH range of 2.0-8.0. The amount adsorbed DB-74 dye on the biosilica-PDA-TEPA was 363.3 mg g(-1) (using initial dye concentration 1200 mg L-1, pH 3.0 and temperature 25 degrees C). Adsorption of DB-74 dye on biosilica-PDA-TEPA particles fitted well Langmuir model. The equilibrium adsorption time was completed within 10 min and the experimental data was defined well by the pseudo-second-order model. In addition, the biosilica-PDA-TEPA particles presented a good performance after regeneration. This result show that the presented low-cost porous biosilica-PDA-TEPA particles can be a good candidate as a novel sorbent system for removal of micro-pollutants from wastewaters. (C) 2018 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.Article Citation - WoS: 47Mitigation of Organophosphate Pesticide Pollution in Agricultural Watersheds(Elsevier, 2020) Şahin, Çağrı; Karpuzcu, M. EkremAdsorption and biodegradation processes for four organophosphate pesticides (chiorpyrifos, diazinon, fenthion, dichlorvos) in wetlands and agricultural drains in Meric-Ergene Basin, Turkey have been investigated. K-oc (organic carbon normalized partition coefficient) values for all pesticides except diazinon were higher in more aromatic Pamuklu Drain sediments, indicating the possible influence of aromaticity on the extent of adsorption. The average half-lives of pesticides in Gala Lake sediments and Pamuklu agricultural drain sediments ranged from 2.25 to 69.31 days with chlorpyrifos exhibiting the slowest biotransformation rate and dichlorvos having the fastest biotransforrnation rate. The presence of humic substances and hydroperiod of wetlands have been identified as possible factors that affected the behavior of organophosphate pesticides in this study. The results from this study provide insight into the constructed wetland design offered for the mitigation of organophosphate pesticides in the basin. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 31Citation - Scopus: 34Dual Remediation of Waste Waters From Methylene Blue and Chromium (vi) Using Thermally Induced Zno Nanofibers(Elsevier, 2020) Elhousseini, Mohamed Hilal; Isık, Tuğba; Kap, Özlem; Verpoort, Francis; Horzum, NesrinElectrospun zinc oxide (ZnO) nanofibers have been significantly improved via a simple heat treatment modification. The present work reports an intriguing cost-effective microstructure tuning, by drastically dropping the temperature of the calcined sample during the cooling period, to get highly photocatalytically active ZnO nanofibers. The calcination temperatures are deducted from thermogravimetric analysis, the phase and purity are confirmed by X-ray diffraction, while the morphology and texture have been revealed by field emission scanning electron microscopy and high-resolution transmission electron spectroscopy. X-ray photoelectron spectroscopy was conducted to get further insight on the surface composition and oxidation states, while N-2-adsorption isotherms were analyzed using the Brunauer-Emmet-Teller methodology. The crystallinity, surface area, and porosity of the ZnO nanofibers, as well as the exposure of active sites, have been enhanced by the rapid cooling method. Photodegradation activity toward methylene blue was improved from 88% to 94%, and 85% to 97%, for free cooled and rapid cooled samples calcined at 300 degrees C and 500 degrees C respectively. The adsorption of chromium (VI) was also tested and reached around 85 mg/g at 100 ppm without being saturated, thereby highlighting one of the most cost-effective performance-enhancing modifications so far that could be extended on different metal oxide nanomaterials.