WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
22 results
Search Results
Article Citation - WoS: 8Citation - Scopus: 7Cvd-Deposited Oxygen-Selective Fluorinated Siloxane Copolymers as Gas Diffusion Layers(American Chemical Society, 2022) Cihanoğlu, Gizem; Ebil, ÖzgençCopolymer thin films of 2,4,6,8-tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxane (V4D4), 2-(perfluorohexylethylacrylate) (PFHEA), and 2-(perfluoroalkylethylmethacrylate) (PFEMA) were synthesized via initiated chemical vapor deposition (iCVD) as potential candidates for gas diffusion layers (GDLs) in gas diffusion electrodes (GDEs) for aqueous metal–air batteries. Thin-film GDLs exhibited an average water vapor transmission rate of 7.5 g m–2 day–1 and enhanced oxygen diffusion with oxygen permeabilities as high as 3.53 × 10–15 mol m m–2 s–1 Pa–1 (10.5 Barrer). The electrochemical performance of GDEs fabricated using commercial catalysts, current collectors, and synthesized GDLs was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and potentiodynamic polarization measurements. The fabricated GDEs exhibited higher oxygen reduction current densities (228.2 mA cm–2) compared to commercial GDEs (132.7 mA cm–2). Copolymer GLDs exhibited an order of magnitude higher oxygen diffusion (39.5 × 10–8 cm2 s–1) in GDEs compared to commercial counterparts (1.84 × 10–8 cm2 s–1). Due to the high oxygen solubility of V4D4 and excellent hydrophobic behavior of PFHEA and PFEMA, their copolymers can effectively promote the diffusion of oxygen and restrict moisture intake, making them ideal materials for GDLs. Combining well-balanced properties of siloxane and fluorinated polymer chemistries, the iCVD process is an excellent low-cost method for the fabrication of GDLs for metal–air battery applications.Article Citation - WoS: 8Citation - Scopus: 8Phase Equilibrium and Diffusion of Solvents in Polybutadiene: a Capillary-Column Inverse Gas Chromatography Study(John Wiley and Sons Inc., 2002) Cai, W. D.; Ramesh, N.; Tıhmınlıoğlu, Funda; Danner, Ronald P.; Duda, John Larry; De Haan, A.The capillary-column inverse gas chromatography method was used to measure the diffusion and partition coefficients of ethylbenzene, styrene, and acrylonitrile in polybutadiene (PBD) at infinite dilution of the solvents. Experiments were performed over a temperature range of 50-125°C. At temperatures well above the glass-transition temperature of PBD, the diffusivities were correlated using an Arrhenius expression. The Arrhenius parameters in turn were intercorrelated and shown to be a function of the occupied volume, thus providing a method for predicting the diffusion of other solvents in the same polymer. Further, the activation energy was predicted using the Duda-Vrentas free-volume approach. The activation energy thus obtained was compared with the activation energy of the Arrhenius approach. The weight-fraction activity coefficient data were compared to the predictions of the group contribution, lattice-fluid equation-of-state, and the UNIquac Functional-group Activity Coefficient (UNIFAC) free-volume models.Article Citation - WoS: 1Citation - Scopus: 1Adsorption and Diffusion Characteristics of Lithium on Hydrogenated ?- and Ss-Silicene(Beilstein-Institut Zur Forderung der Chemischen Wissenschaften, 2017) İyikanat, Fadıl; Kandemir, Ali; Bacaksız, Cihan; Şahin, HasanUsing first-principles density functional theory calculations, we investigate adsorption properties and the diffusion mechanism of a Li atom on hydrogenated single-layer α- and β-silicene on a Ag(111) surface. It is found that a Li atom binds strongly on the surfaces of both α- and β-silicene, and it forms an ionic bond through the transfer of charge from the adsorbed atom to the surface. The binding energies of a Li atom on these surfaces are very similar. However, the diffusion barrier of a Li atom on H-α-Si is much higher than that on H-β-Si. The energy surface calculations show that a Li atom does not prefer to bind in the vicinity of the hydrogenated upper-Si atoms. Strong interaction between Li atoms and hydrogenated silicene phases and low diffusion barriers show that α- and β-silicene are promising platforms for Li-storage applications.Article Citation - WoS: 3Citation - Scopus: 2Adsorption of No in Clinoptilolite-Rich Zeolitic Mineral by Concentration Pulse Chromatography Method(Elsevier Ltd., 2016) Narin, Güler; Ülkü, SemraThe equilibrium and kinetic parameters for NO adsorption in a clinoptilolite-rich natural zeolitic material from Turkey were determined using the concentration pulse chromatography method. Under the experimental conditions (carrier gas velocities and adsorption temperatures) the micropore diffusion resistance was found to be the mass transfer controlling step. Matching the first moment of the response peaks to the mathematical model the Henry's Law constants and heat of adsorption at zero loading were determined. The axial dispersion, external film, macropore and micropore diffusion coefficients, and activation energy for diffusion of NO in the micropores were calculated from the analysis of the second moments of the response peaks. For successive NO pulses without regeneration between the pulses, the retention times of the response peaks decreased and peak areas increased with the injection number indicating irreversible adsorption. The reversibly adsorbed NO could be desorbed by purging with an inert gas at the adsorption pressure and temperature. Temperature programmed desorption profile obtained by heating the NO saturated adsorbent to 400 °C under inert flow revealed presence of multiple irreversibly adsorbed species in NZ with different thermal stabilities. Desorption of these species was not achieved during the heating up to 400 °C which makes the natural zeolitic materıal suitable for NO storage rather than for cyclic adsorptive separation processes.Article An Analysis of Vehicular Traffic Flow Using Langevin Equation(Faculty of Transport and Traffic Sciences, University of Zagreb, 2015) Koşun, Çağlar; Çelik, Hüseyin Murat; Özdemir, SerhanTraffic flow data are stochastic in nature, and an abundance of literature exists thereof. One way to express stochastic data is the Langevin equation. Langevin equation consists of two parts. The first part is known as the deterministic drift term, the other as the stochastic diffusion term. Langevin equation does not only help derive the deterministic and random terms of the selected portion of the city of Istanbul traffic empirically, but also sheds light on the underlying dynamics of the flow. Drift diagrams have shown that slow lane tends to get congested faster when vehicle speeds attain a value of 25 km/h, and it is 20 km/h for the fast lane. Three or four distinct regimes may be discriminated again from the drift diagrams; congested, intermediate, and free-flow regimes. At places, even the intermediate regime may be divided in two, often with readiness to congestion. This has revealed the fact that for the selected portion of the highway, there are two main states of flow, namely, congestion and free-flow, with an intermediate state where the noise-driven traffic flow forces the flow into either of the distinct regimes. © 2015, Faculty of Transport and Traffic Engineering. All rights reserved.Article Citation - WoS: 24Citation - Scopus: 27Visualization of Diffusion and Convection Heat Transport in a Square Cavity With Natural Convection(Elsevier Ltd., 2010) Mobedi, Moghtada; Özkol, Ünver; Sunden, BengtIn this study, the total heatfunction equation which includes diffusion and convection transport is divided into the corresponding heatfunction equations. The superposition rule is used to obtain the mathematical definitions of diffusion and convection heatfunctions and corresponding boundary conditions. It is observed that the separate visualization of diffusion and convection heatlines provides significant information on understanding of the mechanism of heat transfer in a convective flow. The direction of the diffusion and convection heat transport as well as the strength of convection compared to the conduction in entire or in a portion of a domain can be visualized. The diffusion heatlines demonstrate a potential flow like behavior while convective heat flow rotates due to the source term of the convection heatfunction equation, similar to the rotation of fluid flow generated by fluid flow vorticity. The similarity between the streamfunction and the total heatfunction yields a concept of heat flow vorticity, Ωt. The obtained results show that the maximum absolute value of the convection heatfunction may be an appropriate parameter for determination of the convection strength. The diffusion and convection heatfunction equations for natural convection in a differentially heated square cavity for four different length of the heated surface on the right vertical wall as sp = L/4, L/2, 3L/4 and L and a fixed length of the cooled surface on the right vertical wall as L/4 are obtained and corresponding heatlines are drawn. The values of the conduction heatfunction are positive while the sign of convection heatfunction values is negative for the studied cases. Based on the distribution of total heatlines, two regions are detected in the cavity, an active region with the positive values of heatlines signifying dominant conduction heat transfer and a passive region with the negative heatfunction values in where convection heat flow is dominant and heat only rotates in a closed contour pattern. The variations of average Nusselt number, average of heat flow vorticity, maximum absolute values of convection heatfunction and streamfunction at different Rayleigh numbers and lengths of the heated surface are presented.Article Citation - WoS: 11Citation - Scopus: 13Sorption and Diffusion of Water Vapour on Edible Films(Springer Verlag, 2008) Berkün, Didem; Balköse, Devrim; Tıhmınlıoğlu, Funda; Alsoy Altınkaya, SacideTwo types of films consisting of sodium salt of carboxymethyl cellulose (NaCMC) and hydroxypropyl cellulose (HPC) as film forming materials and glycerin as plasticizer were prepared, characterized and their water vapour sorption properties were determined. The water sorption isotherms of the films were measured using a magnetic suspension balance. Results show that diffusion of water vapour in NaCMC based film is faster than that in HPC based films, due to the heterogeneous structure and larger pore dimensions of the NaCMC films.Article Citation - WoS: 18Citation - Scopus: 21Predicting Emission Characteristics of Volatile Organic Compounds From Wet Surface Coatings(Elsevier Ltd., 2009) Alsoy Altınkaya, SacideA mathematical model is developed to describe the emission characteristics of VOCs from homogeneous wet coating materials deposited on impermeable substrates. The model considers mass transfer in the material and in air, boundary layer resistance and the change in the coating thickness with time due to emission of VOC. Key features of the model are incorporation of concentration dependent VOC diffusion coefficients predicted from a physical model and nonlinear equilibrium isotherm at the coating/air interface. The model is applied to predict emission characteristics of MMA from acrylic based surface coatings. In an attempt to investigate the influences of equilibrium isotherm type and diffusion formalism on the predictions, simulations are performed with either constant or concentration dependent diffusivities and linear or nonlinear equilibrium isotherms. The lowest MMA concentration in air is predicted by incorporating the concentration dependent diffusivity and nonlinear equilibrium isotherm. The results suggest that assuming the diffusivity of MMA constant or equilibrium isotherm linear may lead to wrong conclusions about the emission rates from wet coatings. The model is general, fully predictive and can be used to predict emission rates of different VOCs from different coating materials if diffusion and thermodynamic parameters are available.Article Citation - WoS: 12Citation - Scopus: 17Diffusion Mechanism of Water Vapour in a Zeolitic Tuff Rich in Clinoptilolite(Springer Verlag, 2008) Çakıcıoğlu Özkan, Seher Fehime; Ülkü, SemraThe adsorption kinetics of H2O in a clinoptilolite rich zeolitic tuff was experimentally investigated at 18°C. In the identification of the diffusion mechanism the isothermal adsorption model equation was used. It was found out that the intraparticle mass transfer becomes more dominant over the heat transfer with increase in particle size and the adsorptive dose pressure. Although initially intraparticle mass transfer was the controlling resistance later external heat transfer also contributes to the transfer mechanism.Article Citation - WoS: 5Citation - Scopus: 5Solvent Sorption in a Polymer-Solvent System - Importance of Swelling and Heat Effects(Elsevier Ltd., 2006) Alsoy Altınkaya, Sacide; Ramesh, Narayan; Duda, John LarrySorption experiments are often conducted in gravimetric sorption columns where several deviations from ideal conditions could potentially occur. For example, heat effects due to solvent sorption, errors introduced due to concentration dependent diffusion coefficients and swelling are unavoidable. In this study, we develop a model to study the importance of the combination of these effects in obtaining diffusion coefficients from sorption experiments. The model is used to explore a wide range of operating conditions and physical parameters.
- «
- 1 (current)
- 2
- 3
- »