WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
5 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 2Morphology of Sodium Salt of Calf Thymus Dna on Mica, Alumina, and Silica Surfaces: Effect of Solvent and Drying Method(Taylor and Francis Ltd., 2017) Yetgin, Senem; Balköse, Devrim; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyInvestigation of morphology of deoxyribonucleotide triphosphate (DNA) dried on different surfaces by atomic force microscopy (AFM) is important in DNA research that is focused on subjects of condensation for gene therapy, sizing, DNA mapping, and cancer examination. The solvent, the surface type, and the method of drying effect the morphology of DNA on solid surfaces. Ethanol and water were used as solvents, flat mica, silica, and alumina surfaces were used as the substrates in the present study. Different methods such as ambient air-drying, N2-forced flow regime drying, and freeze-drying have been applied to droplets of DNA solutions in water or ethanol on the substrates. Forced flow drying regime causes nonlinear DNA attachment on the surface and self-assembly. DNA vertical distance on mica surface was found to be 6 and 1.4 nm for DNA dried in ambient air from ethanol and water solutions, respectively. It was 1.6 nm for N2 flow drying of aqueous DNA solution on mica surface. It was 4.6, 4.6, and 1.99 nm for ambient, N2 flow, and freeze-dried aqueous DNA on alumina surfaces, respectively. Aqueous solution of DNA dried under N2 flow on silica surface had 0.8 nm vertical distance. The smallest standard deviation of 0.05 nm was observed for DNA dried under N2 flow on alumina surface.Article Citation - WoS: 41Citation - Scopus: 42Fructose Dehydration To 5-Hydroxymethylfurfural Over Sulfated Tio2-Sio2, Ti-Sba Zro2, Sio2, and Activated Carbon Catalysts(American Chemical Society, 2015) Kılınç, Emre; Yılmaz, Selahattin; Yılmaz, Selahattin; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyDifferent sulfated catalysts including SO4/TiO2-SiO2, SO4/Ti-SBA-15, SO4/ZrO2, SO4/AC, and SO4/SiO2 were tested in fructose dehydration to 5-hydroxymethylfurfural (HMF). Reactions were carried out in dimethyl sulfoxide (DMSO) at 110 °C. Characterization results indicated that no sulfur leaching was observed from SO4/ZrO2, SO4/TiO2-SiO2, and SO4/Ti-SBA-15 catalysts in the reaction tests. The SO4/TiO2-SiO2 catalyst had a high amount of strong acid sites and the highest amount of Bronsted sites. The highest selectivity to HMF at high conversion, that is, 89% selectivity at 77% fructose conversion was obtained over this catalyst. It preserved its activity after four times reuse.Activated carbonCarbonCatalystsDehydrationArticle Citation - WoS: 13Citation - Scopus: 15Determination of Thermodynamic and Transport Properties of Solvents and Non Solvents in Poly(l-Lactide(John Wiley and Sons Inc., 2006) Eser, Hülya; Tıhmınlıoğlu, Funda; Tıhmınlıoğlu, Funda; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThermodynamic properties, partition coefficient, and diffusion coefficients of the various solvents (acetone, dichloromethane, trichloromethane, ethyl acetate, ethyl alcohol, tetrahydrofuran, and water) in poly(lactide-co- glycolide) (PLGA) at infinite dilution of the solvent have been determined by inverse gas chromatography (IGC). In IGC method, which is based on the characteristic equilibrium partitioning of a solute between a mobile phase and a stationary phase, a small pulse of solvent is introduced into the column and by the aid of retention volume of the solvent, several polymer solvent interaction properties, namely retention volume (Vg), infinitely dilute weight fraction activity coefficient (Ω1∞), Flory-Huggins interaction parameter (χ), and solubility parameters of the polymer (δ2∞) can be determined. The thermodynamic results indi cated that trichloromethane and dichloromethane were the most suitable solvents among all the solvents studied for PLGA. The partition (K) and diffusion coefficients (Dp) of various solvents at infinite dilution of the solvent were calculated by using the model developed by Pawlisch et al. (Macromolecules 1987, 20, 1564). The optimum K and D p values that best fit the data were found and the model predicted experimental data very well. So IGC method is a powerful tool for the determination of thermodynamic and diffusion properties of solvent in polymer at infinite dilution of the solvent.Article Citation - WoS: 26Citation - Scopus: 28Influence of Swelling and Diffusion-Induced Convection on Polymer Sorption Processes(John Wiley and Sons Inc., 2002) Alsoy Altınkaya, Sacide; Alsoy Altınkaya, Sacide; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyUnsteady-state sorption of a vapor or liquid by a polymer is modeled to include the influence of the moving phase boundary associated with the polymer swelling and diffusion-induced convection. A formulation presented clearly elucidates the influence of these two effects on the overall sorption process. Numerical solutions of the model equations indicate the errors that can be induced when swelling or convection are neglected. For most polymer-solvent systems, the influence of the diffusion-induced convection associated with volume changes in mixing can be neglected in the analysis of sorption processes. In contrast, the correction for the moving boundary or swelling of the polymer phase can be quite significant, particularly when a large step change in solvent concentration is considered.Article Citation - WoS: 17Citation - Scopus: 18Solvent Diffusion in Amorphous Polymers: Polystyrene-Solvent Systems(John Wiley and Sons Inc., 2000) Tıhmınlıoğlu, Funda; Tıhmınlıoğlu, Funda; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThe inverse gas chromatography (IGC) technique was used to obtain the partition and diffusion coefficients of solvents in polystyrene over a wide range of temperatures. Infinite dilution experiments were performed with three solvents: toluene, benzene, and hexane. Finite concentration data were measured for the polystyrene-toluene system at various concentrations from 110 to 180 °C. For the finite concentration region, the modified capillary column model used by Tihminlioglu and Danner (J Chromatogr A 1999, 845, 93-101) was used to calculate diffusion and thermodynamic data. Finite concentration thermodynamic data were also calculated with the retention theory approach and compared with the capillary column model. The experimental IGC results are in good agreement with data from other experimental techniques.