WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
18 results
Filters
Settings
Search Results
Article Eğitim yapılarında asansör trafik analizi yöntemlerinin karşılaştırılmasına yönelik bir araştırma(Gazi Üniversitesi, 2023) Deligöz, Dostcan; Harputlugil, TimuçinPurpose: Regarding elevator design in educational buildings; It is aimed to investigate the legal framework, to integrate dynamic simulation programs to design process, to compare traditional and dynamic simulation methods, to evaluate the adequacy of elevator features specified in the legislation and to determine the optimum scenarios according to the minimum requirements.Theory and Methods: Based on the findings of the literature review, which examines the issue of elevator traffic analysis together with the legislation and regulations, the carrying capacities of the elevators in the educational buildings designed by the Ministry of National Education (MNE) are tested. The stability of the system is tested by analyzing the conditions where only the disabled, disabled and building workers can be used together and all building users can use the elevators with the dynamic simulation method (with Elevate Software). The limits of the system are determined based on the waiting times during the peak usage periods. The findings of the study are evaluated according to the waiting times determined by CIBSE Guide D and the Chamber of Mechanical Engineers followed by the discussion of the outcomes.Results: The issue of elevator design has been overlooked in educational buildings, and a comprehensive elevator traffic analysis method has not been defined. For the effective use of all occupants, elevator design should be handled comprehensively with considering potentials of dynamic simulation method.Conclusion: According to the findings of the study, it is noted that the number and capacity of elevators in the legislation for educational buildings are determined only for minimum conditions and for disabled users. In addition, the legislation (considering calculation methodology) is not specific for educational buildings but related with buildings in general with public use. Considering the occupants, and their profiles of the educational buildings, a more comprehensive traffic analysis with the dynamic simulation method may enable the elevators to be designed and to be used more efficiently.Article Citation - WoS: 11Citation - Scopus: 12Numerical Modelling Assisted Design of a Compact Ultrafiltration (uf) Flat Sheet Membrane Module(MDPI, 2021) Bopape, Mokgadi F.; Van Geel, Tim; Dutta, Abhishek; Van der Bruggen, Bart; Onyango, Maurice StephenThe increasing adoption of ultra-low pressure (ULP) membrane systems for drinking water treatment in small rural communities is currently hindered by a limited number of studies on module design. Detailed knowledge on both intrinsic membrane transport properties and fluid hydrodynamics within the module is essential in understanding ULP performance prediction, mass transfer analysis for scaling-up between lab-scale and industrial scale research. In comparison to hollow fiber membranes, flat sheet membranes present certain advantages such as simple manufacture, sheet replacement for cleaning, moderate packing density and low to moderate energy usage. In the present case study, a numerical model using computational fluid dynamics (CFD) of a novel custom flat sheet membrane module has been designed in 3D to predict fluid flow conditions. The permeate flux through the membrane decreased with an increase in spacer curviness from 2.81 L/m(2)h for no (0%) curviness to 2.73 L/m(2)h for full (100%) curviness. A parametric analysis on configuration variables was carried out to determine the optimum design variables and no significant influence of spacer inflow or outflow thickness on the fluid flow were observed. The numerical model provides the necessary information on the role of geometrical and operating parameters for fabricating a module prototype where access to technical expertise is limited.Article Citation - WoS: 5Citation - Scopus: 5Comparison of Advanced Daylighting Systems To Improve Illuminance and Uniformity Through Simulation Modelling(Znack Publishing House, 2014) Kazanasmaz, Zehra Tuğçe; Fırat Örs, PelinDeficiencies in daylighting performance (illuminance and uniformity) of educational facilities may cause health problems, work performance loss and excessive energy consumption. The varying nature of daylight in daily and yearly basis is a strong challenge on that matter. Advanced daylighting systems have been developed to overcome this challenge. Improving the daylighting performance of existing buildings is another difficulty in daylighting design. Daylighting design needs should be carefully considered at the initial design stages of the buildings. So, the aim of this study was to improve the illuminance and uniformity in four selected architectural design studios in Izmir. Measurements of daylight illuminance were conducted in May and June 2012. Simulation models were built in Ecotect/Radiance. To reach the best daylighting performance, simulations were carried out by Desktop Radiance with applying laser cut panels, prismatic panels and light shelves. It is considered that retrofitting efforts after the construction would be inadequate regarding daylighting, unless complying with the standards during the design process.Article Citation - WoS: 3Citation - Scopus: 5Helenistik Kulelerde Yanal Yüke İlişkin Düzlem İçi ve Düzlem Dışı Duvar Davranışının Duvar Profilleri ve Açıklık Düzenlerine Bağlı Olarak İncelenmesi(Gazi Üniversitesi, 2020) Gençer, Funda; Turan, Mine; Aktaş, EnginDry masonry wall profiles constructed without using bonding material between blocks are encountered in different building types dated to Greek, Hellenistic and Roman periods. Depending on development of earthquake experiences, dry masonry wall profiles vary in terms of wall thickness, number of layers, relationship of layers and size, form, organization and relationship of blocks. In this study, the construction details increasing the structural strength in watch towers constructed in Hellenistic Period are aimed to be determined. This study is limited with investigation of effect of wall profiles and opening organizations on in-plane and out-of-plane wall behaviors under lateral loading. Primarily, wall profiles and opening types of dry masonry towers in ancient Caria, Pamphylia and Cilicia regions, that have not lost authenticity and integrity or had information about their authentic form, were documented. By using gathered data, hypothetic towers with different wall profiles and opening types are designed. To determine in-plane and out-of-plane wall behavior of hypothetic towers, simulation of quasi-static tilt analysis based on equilibrium were carried out, and form changes at walls and collapse angles of towers were identified. Wall profile and opening properties effecting on structural strength under lateral loading were determinedd.Article Citation - WoS: 1Citation - Scopus: 2Oluklu alüminyum sandviç panellerde kor yüksekliğinin enerji sönümleme kapasitesine olan etkisi(Gazi Üniversitesi, 2020) Kılıçaslan, Cenk; Güden, MustafaIn this study, energy absorbing capacity of brazed and polyurethane adhesively bonded corrugated aluminum sandwich panels were investigated. In sandwich panels, Al 1050 H14 trapezoidal zig-zag corrugated cores and face and interlayer sheets were used. Each sandwich panel has core orientation of 0 degrees/0 degrees or 0 degrees/90 degrees. The cores used in these panels were smaller, core height is about 3 mm, in contrast to conventional sandwich cores. Impact tests were conducted at 3 and 6 m/s with spherical projectors. Adhesively bonded sandwich panels were also tested at 6 m/s with flat and conical projectors. Numerical models were prepared in LSDYNA to investigated the deformation behavior of cores. Panels tested with flat and conical projectors experienced complete perforation and absorbed more energy at configuration of 0 degrees/0 degrees core orientation. However, panels tested with spherical projectors were not perforated and they absorbed more energy at configuration of 0 degrees/90 degrees core orientation. Energy absorbing capacity of the panels were also compared to the panels having 9 mm height corrugated cores. The results showed that effective collapsing length was seen to increase due to increase in core height and impact energy distributed the whole panel surface more homogenous manner.Article Citation - WoS: 7Citation - Scopus: 8Implementation and Experimental Verifications of Microstrip Antennas for Angular Scanning of a Doppler Radar(Elsevier, 2019) Karatay, Anıl; Orcan, Durmuş; Özkal, Ceren; Yaman, FatihThe aim of this study is to improve operational capabilities and range of the MIT-Coffee Can Doppler radar via aperture coupled Vivaldi type transmitter antenna, patch array receiver antenna, and an unequal power divider. Accordingly, a mechanical angular scanning feature for tracking multi-targets and the system integration of lightweight microstrip structures are realized for the radar. A narrow beamwidth in the receiver and a well impedance matching on the overall system to reduce return losses are achieved for the considered application. Good agreements between simulations and measurements for the fabricated antennas/divider and a successful integration of the antennas to the existing system for finding a moving target angular location is reported. It is shown that through wall identification and target velocity at scanned regions can be obtained with the proposed hardware configuration. Simulation results of antenna parameters for various number of array elements are listed which could be a useful tool for different engineering applications. (C) 2019 Elsevier GmbH. All rights reserved.Article Citation - WoS: 5Citation - Scopus: 5Determination of the Dill Parameters of Thick Positive Resist for Use in Modeling Applications(Elsevier Ltd., 2011) Roeder, G.; Liu, S.; Aygün, Gülnur; Evanschitzky, P.; Erdmann, A.; Schellenberger, M.; Pfitzner, LThe determination of Dill parameters of thick resist is very important to improve simulation models of resist exposure and real world processes. A new extraction technique of Dill parameters based on spectroscopic ellipsometry in combination with an advanced resist exposure model is proposed for thick resist analysis. The complex refractive index of the resist is related to the relative concentration of the photoactive compound in the resist in order to describe the vertical distribution of the refractive index and the extinction coefficient. Moreover, Dill parameters are extracted by directly fitting the bleaching curves to the measured ellipsometry data. The new approach was investigated experimentally by spectroscopic ellipsometry measurements on AZ5214E resist with two moderate layer thickness values in order to verify the accuracy of the new method. Dill parameters were extracted by using this new technique and by applying resist samples subjected to different exposure doses. Possible reasons for the variation of Dill parameters depending on resist thickness are explained. Furthermore, advantages, limitations and potential improvements of the model are discussed. Finally, the impact of Dill parameter variation on image formation in the resist is demonstrated by applying the spectroscopic ellipsometer analysis results as input parameters to the lithography simulator Dr.LiTHO.Article Citation - WoS: 103Citation - Scopus: 132Break-Even Analysis and Size Optimization of a Pv/Wind Hybrid Energy Conversion System With Battery Storage - a Case Study(Elsevier Ltd., 2009) Ekren, Orhan; Yetkin Ekren, Banu; Özerdem, BarışThis paper aims to show an optimum sizing procedure of autonomous PV/wind hybrid energy system with battery storage and a break-even analysis of this system and extension of transmission line. We use net present value (NPV) method for the comparison of autonomous hybrid energy system and extension of transmission line cases. The case study is completed for the satisfaction of the electricity consumption of global system for mobile communication base station (GSM) at Izmir Institute of Technology Campus Area, Urla, Izmir, Turkey. First, we optimize the PV/wind energy system using response surface methodology (RSM) which is a collection of statistical and mathematical methods relying on optimization of response surface with design parameters. As a result of RSM, the optimum PV area, wind turbine rotor swept area, and battery capacity are obtained as 3.95 m2, 29.4 m2, 31.92 kW h, respectively. These results led to $37,033.9 hybrid energy system cost. Second, break-even analysis is done to be able to decide the optimum distance where the hybrid energy system is more economical than the extension of the transmission line. The result shows that, if the distance between national electricity network and the GSM base station location where the hybrid energy system is assumed to be installed is at a distance more than 4817 m, the installation of hybrid energy system is more economical than the electricity network.Article Citation - WoS: 50Citation - Scopus: 53Nanoscale Oxide Growth on Al Single Crystals at Low Temperatures: Variable Charge Molecular Dynamics Simulations(American Physical Society, 2006) Hasnaoui, A.; Politano, O.; Salazar, J. M.; Aral, GürcanWe investigate the oxidation of aluminum low-index surfaces [(100), (110), and (111)] at low temperatures (300-600 K) and three different gas pressure values. We use molecular dynamics (MD) simulations with dynamic charge transfer between atoms where the interaction between atoms is described by the Es+ potential composed of the embedded atom method (EAM) potential and an electrostatic contribution. In the considered temperature range and under different gas pressure conditions, the growth kinetics follow a direct logarithmic law where the oxide thickness is limited to a value of ∼3 nm. The fitted curves allow us to determine the temperature and the pressure dependencies of the parameters involved in the growth law. During the adsorption stage, we observe a rotation of the oxygen pair as a precursor process to its dissociation. In most cases, the rotation aligns the molecule vertically to the Al surface. The separation distance after dissociation ranges from 3 to 9. Atomistic observations revealed that the oxide presents a dominant tetrahedral (Al O4) environment in the inner layer and mixed tetrahedral and octahedral (Al O6) environments in the outer oxide region when the oxide thickness reaches values beyond ∼2 nm.Article Citation - WoS: 103Citation - Scopus: 126Ann and Fuzzy Logic Models for Simulating Event-Based Rainfall-Runoff(American Society of Civil Engineers (ASCE), 2006) Tayfur, Gökmen; Singh, Vijay P.This study presents the development of artificial neural network (ANN) and fuzzy logic (FL) models for predicting event-based rainfall runoff and tests these models against the kinematic wave approximation (KWA). A three-layer feed-forward ANN was developed using the sigmoid function and the backpropagation algorithm. The FL model was developed employing the triangular fuzzy membership functions for the input and output variables. The fuzzy rules were inferred from the measured data. The measured event based rainfall-runoff peak discharge data from laboratory flume and experimental plots were satisfactorily predicted by the ANN, FL, and KWA models. Similarly, all the three models satisfactorily simulated event-based rainfall-runoff hydrographs from experimental plots with comparable error measures. ANN and FL models also satisfactorily simulated a measured hydrograph from a small watershed 8.44 km2 in area. The results provide insights into the adequacy of ANN and FL methods as well as their competitiveness against the KWA for simulating event-based rainfall-runoff processes.