WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
71 results
Filters
Settings
Search Results
Article Decision-Support Approaches for Sustainable Water Resource Management in Northwest Algeria(Polish Society of Ecological Engineering – PTIE, 2025) Meskine, Ahmed; Cherif, El Amine; Zerouali, Bilel; Ouadja, Abid; Santos, Celso Augusto Guimaraes; Bailek, Nadjem; Baba, AlperThis study investigates water resource management in the Wilaya of Mostaganem, northwest Algeria, using the water evaluation and planning (WEAP) decision support tool in combination with the analytic hierarchy process (AHP). As water scarcity becomes increasingly critical due to population growth, agricultural demands, and climate variability, effective management strategies are essential. This research employs WEAP to simulate various water demand and supply scenarios, assessing the impacts of irrigation efficiency, industrial development, and climate conditions on water availability. Under the ASI scenario, unsatisfied water demand may reach 4.3 hm3 per year by 2027. However, improving irrigation efficiency could reduce this by up to 50% compared to the reference scenario. Seasonal variations reveal deficits reaching 3.2 hm3 per month during the summer months of July through October. Additionally, the study highlights that a significant increase in water demand, exceeding 80 hm3 by 2060, can be mitigated through improved water supply initiatives, such as constructing new dams. The integration of AHP enables the prioritization of management strategies based on stakeholder preferences, demonstrating that adapting to climate change can stabilize demand below 50 million cubic meters. This integrated approach provides valuable insights for policymakers and stakeholders in developing sustainable water resource strategies that address the challenges faced by the Mostaganem region.Article Water Supply Systems: Past, Present Challenges, and Future Sustainability Prospects(Mdpi, 2025) Angelakis, Andreas N.; Capodaglio, Andrea G.; Kumar, Rohitashw; Valipour, Mohammad; Ahmed, Abdelkader T.; Baba, Alper; Dercas, NicholasAt the beginning of human history, surface water, especially from rivers and springs, was the most frequent water supply source. Groundwater was used in arid and semi-arid regions, e.g., eastern Crete (Greece). As the population increased, periodic water shortages occurred, which led to the development of sophisticated hydraulic structures for water transfer and for the collection and storage of rainwater, as seen, for example, in Early Minoan times (ca 3200-2100 BC). Water supply and urban planning had always been essentially related: the urban water supply systems that existed in Greece since the Bronze Age (ca 3200-1100 BC) were notably advanced, well organized, and operable. Water supply systems evolved considerably during the Classical and Hellenistic periods (ca 480-31 BC) and during the Roman period (ca 31 BC-480 AD). Also, early Indian society was an amazing vanguard of technology, planning, and vision, which significantly impacted India's architectural and cultural heritage, thus laying the foundation for sustainable urban living and water resource management. In ancient Egypt, the main source of freshwater was the Nile River; Nile water was conveyed by open and closed canals to supply water to cities, temples, and fields. Underground stone-built aqueducts supplied Nile water to so-called Nile chambers in temples. The evolution of water supply and urban planning approaches from ancient simple systems to complex modern networks demonstrates the ingenuity and resilience of human communities. Many lessons can be learned from studying traditional water supply systems, which could be re-considered for today's urban sustainable development. By digging into history, measures for overcoming modern problems can be found. Rainwater harvesting, establishing settlements in proximity of water sources to facilitate access to water, planning, and adequate drainage facilities were the characteristics of ancient civilizations since the ancient Egyptian, Minoan, Mohenjo-Daro, Mesopotamian, and Roman eras, which can still be adopted for sustainability. This paper presents significant lessons on water supply around the world from ancient times to the present. This diachronic survey attempts to provide hydro-technology governance for the present and future.Article Citation - WoS: 6Citation - Scopus: 6Evaluating the Impact of Nature-Based Solutions on the Provision of Water-Related and Water-Dependant Ecosystem Services(Elsevier Inc., 2024) Marijuan, Raquel; Diez, Barbara; Pelaez-Sanchez, Sara; Iglesias, Jesus; Sirin, Basar; Baba, Alper; Sanchez, RaulWater scarcity is a pressing issue in the Mediterranean region, exacerbated by overuse of resources for agriculture and the impacts of climate change. Addressing this challenge requires improved water cycle management and the adoption of Nature-based Solutions (NbS) to enhance infrastructure efficiency and sustainability. With the aim of promoting the implementation and assessment of NbS, we have developed a monitoring framework that integrates the assessment of ecological, socio-economic and cultural aspects under the umbrella of the IUCN Global Standard for NbS. A list of Key Performance Indicators (KPIs) was selected following standard methodologies. We have applied the framework to five case studies in the Mediterranean region to evaluate its efficiency to assess NbS tailored to local challenges and contexts. As part of the monitoring framework, we used the IUCN self-assessment tool for the Global Standard for NbS, demonstrating adherence of 50-75 % across all case studies. Common KPIs were identified, streamlining monitoring efforts and providing guidance from the design phase onwards. Our monitoring framework offers a comprehensive approach to evaluating NbS interventions, ensuring alignment with global standards and enhancing resilience in water management. By integrating the IUCN Global Standard, it provides robust guidance for future execution, contributing to sustainable water resource management in the Mediterranean and beyond.Article Citation - WoS: 10Effects of Seismic Activity on Groundwater Level and Geothermal Systems in İzmir, Western Anatolia, Turkey: the Case Study From October 30, 2020 Samos Earthquake(Tubitak Scientific & Technological Research Council Turkey, 2021) Uzelli, Taygun; Bilgic, Esra; Ozturk, Bahadir; Baba, Alper; Sozbilir, Hasan; Tatar, OrhanThe October 30, 2020 Samos earthquake (Mw 6.6) affected the Aegean Sea and environs, caused destruction and loss of life in the city of & Idot;zmir located 70 km away from the earthquake epicenter. Before this earthquake, water resources were monitored in the areas of Bayrakl & imath;, G & uuml;lbah sigma e, and Seferihisar. For this purpose, 10 groundwater monitoring wells were drilled in the Bayrakl & imath; area, where groundwater level, temperature, and electrical conductivity changes were monitored at 1-h intervals in 5 wells. Besides physical parameters such as groundwater levels, temperatures and electrical conductivities, hydrogeochemical cations, and anions measured in the study area. Change in the groundwater levels was observed before, during, and after the Samos earthquake. A trend of rising groundwater level was observed two days before the mainshock, to a height of 10 cm, and the level was maintained till the end of the earthquake. The water levels returned to its original height after about 7 to 10 days of the earthquake. Moreover, electrical conductivity (EC) values were changed because of the interaction with the surrounding rocks and well walls, mixing with different waters during the earthquake shaking. The essential anomalies were observed in the geothermal fields of G & uuml;lbah sigma e and Seferihisar. Due to this earthquake, new geothermal springs emerged along the NE-SW trending G & uuml;lbah sigma e and Tuzla faults, located about 50 to 20 km from the Samos earthquake epicenter, respectively. The new geothermal waters are in Na-Cl composition and similar to other geothermal springs in the region. While the recorded water temperatures in the new geothermal springs vary from 40 to 45 degrees C in Seferihisar, it was measured between 35 and 40 degrees C in G & uuml;lbah sigma e. Due to these anomalies, it is found essential to monitor the effect of the earthquake on the physical and chemical characteristics of the groundwater and its usefulness in earthquake predictions.Article Citation - WoS: 3Citation - Scopus: 4Comparison of Conventional and Machine Learning Models for Kinetic Modelling of Biomethane Production From Pretreated Tomato Plant Residues(Elsevier, 2025) Fidan, Berrak; Bodur, Fatma-Gamze; Oztep, Gulsh; Gungoren-Madenoglu, Tuelay; Baba, Alper; Kabay, NalanTomato plant residues (Solanum lycopersicum L.) lack sustainable applications as abundant lignocellulosic biomass after harvest. These residues can be utilized as substrates in anaerobic digestion for biomethane production, generating energy and reducing waste. The purpose of this study was to investigate the sustainable utilization of tomato plant residues for biomethane production at varying conditions and to model biological kinetics. The study aimed to evaluate the effects of varying substrate/inoculum ratios, sulfuric acid pretreatment concentrations, and yeast (Saccharomyces cerevisiae) addition on biogas and biomethane yields under mesophilic conditions (37 degrees C). Maximum biogas and biomethane yields in the studied range were obtained when the substrate/inoculum ratio was 3 (g substrate/g inoculum), the sulfuric acid concentration used for residue pretreatment was 2 %v/v, and the substrate/yeast ratio was 10 (g substrate/g yeast). The yeast ratio of 10 increased the cumulative biogas and biomethane production by 96.5 and 128.9%, respectively. Conventional models (Modified Gompertz, Cone, First-order, Logistic) and Machine Learning models (Support Vector Machine and Neural Network) were compared for biological kinetics. Machine Learning models were also observed to give good fitting results similar to conventional models. Results suggest that Machine Learning models (RMSE: 2.5833-12.0500) are reliable methods like conventional kinetic models (RMSE: 2.1796-13.4880) for forecasting biomethane production in anaerobic digestion processes and Machine Learning models can be applied without needing prior understanding of biomethane production kinetics.Article Citation - Scopus: 1Anomalous Crustal Structure Beneath the Örenli-Eğiller Depression Zone, Inferred From Magnetotelluric Studies, Western Anatolia, Türkiye(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2024) Chandrasekharam, Dornadula; Raju, K.; Subba Rao, P.B.V.; Baba, AlperIn Türkiye, the prevalence of high radiogenic granites makes them ideal locations for initiating enhanced geothermal system (EGS) projects. One such occurrence of these granites is observed in the Kozak area of the Bergama region. To assess the energy potential of this site, a magnetotelluric (MT) survey was conducted, focusing on determining the depth distribution of the intrusive granite. The survey employed dimensionality analysis, utilizing Bahr skew and phase tensor analyses that denote a 2D subsurface nature up to 100 s and beyond that a 3D nature. In the present study, we interpreted MT data up to 100 s. The data collected, including rotated impedance tensors and tippers, were inverted using a nonlinear conjugate gradient algorithm integrated into the MT interpretation software of the WinG Link 2D inversion data modeling package. Multiple homogeneous half-space initial models were tested during the 2D inversion process. The findings indicate the existence of a midcrustal conductor associated with graphites and iron sulfides in the source region. This conductivity may be attributed to processes such as exsolution of metamorphic fluids, influx of mantle sources, or the entry of magmatic fluids through transcrustal fault zones. The findings indicate that the intrusive granite was emplaced along a NE–SW major fault, penetrating shallow crustal levels. The depth of this granite intrusion is determined to be 15 km, covering an outcrop area of 60 km². This detailed geological information allows a comprehensive assessment of the power-generating capacity of the intrusive granite. The results of this investigation contribute valuable insights for the development and optimization of Enhanced Geothermal System (EGS) projects in the region. © 2024, TUBITAK. All rights reserved.Review Citation - WoS: 19Citation - Scopus: 22Water Dams: From Ancient To Present Times and Into the Future(MDPI, 2024) Angelakis, Andreas N.; Baba, Alper; Valipour, Mohammad; Dietrich, Jorg; Fallah-Mehdipour, Elahe; Krasilnikoff, Jens; Ahmed, Abdelkader T.Since ancient times, dams have been built to store water, control rivers, and irrigate agricultural land to meet human needs. By the end of the 19th century, hydroelectric power stations arose and extended the purposes of dams. Today, dams can be seen as part of the renewable energy supply infrastructure. The word dam comes from French and is defined in dictionaries using words like strange, dike, and obstacle. In other words, a dam is a structure that stores water and directs it to the desired location, with a dam being built in front of river valleys. Dams built on rivers serve various purposes such as the supply of drinking water, agricultural irrigation, flood control, the supply of industrial water, power generation, recreation, the movement control of solids, and fisheries. Dams can also be built in a catchment area to capture and store the rainwater in arid and semi-arid areas. Dams can be built from concrete or natural materials such as earth and rock. There are various types of dams: embankment dams (earth-fill dams, rock-fill dams, and rock-fill dams with concrete faces) and rigid dams (gravity dams, rolled compacted concrete dams, arch dams, and buttress dams). A gravity dam is a straight wall of stone masonry or earthen material that can withstand the full force of the water pressure. In other words, the pressure of the water transfers the vertical compressive forces and horizontal shear forces to the foundations beneath the dam. The strength of a gravity dam ultimately depends on its weight and the strength of its foundations. Most dams built in ancient times were constructed as gravity dams. An arch dam, on the other hand, has a convex curved surface that faces the water. The forces generated by the water pressure are transferred to the sides of the structure by horizontal lines. The horizontal, normal, and shear forces resist the weight at the edges. When viewed in a horizontal section, an arch dam has a curved shape. This type of dam can also resist water pressure due to its particular shape that allows the transfer of the forces generated by the stored water to the rock foundations. This article takes a detailed look at hydraulic engineering in dams over the millennia. Lessons should be learned from the successful and unsuccessful applications and operations of dams. Water resource managers, policymakers, and stakeholders can use these lessons to achieve sustainable development goals in times of climate change and water crisis.Article Citation - Scopus: 3Evaluation of Gis-Based Spatial Interpolation Methods for Groundwater Level: a Case Study of Türkiye(Tubitak Scientific & Technological Research Council Turkey, 2024) Kırçiçek, Nilüfer Tirol; Baba, Alper; Koçbay, Ayhan; Toklu, Murat MertGroundwater is a valuable and universally distributed resource on Earth. Understanding the spatial and temporal dynamics of groundwater is of utmost importance for effective management. Normally, groundwater levels are recorded at arbitrary points, but groundwater modeling requires interpolating the measured values at specific grid nodes. This study aims to dentify and evaluate the geographical variations of groundwater levels in Türkiye using three geostatistical interpolation techniques. Data from 355 groundwater wells from 1970 to 2019 were used for this purpose. In addition, an investigation of changes in annual average temperature and precipitation was conducted for two different time periods: 1985–2000 and 2001–2016. The results show an increase in the annual average temperature in Türkiye by 0.82 °C during the reference period (1985–2000). Despite regional differences in the precipitation regime, the average annual precipitation in Türkiye has not changed significantly overall. Especially in the Meriç-Ergene, Konya Closed (Konya Kapalı), and Euphrates-Tigris basins, a significant decrease in groundwater levels was observed, even though this decrease is less than 100 m in some wells. After a comprehensive analysis of all these data, possible explanations for the changes in groundwater levels were considered.Article Citation - WoS: 4Citation - Scopus: 6A Sustainable Clean Energy Source for Mitigating Co<sub>2</Sub> Emissions: Numerical Simulation of Hamit Granitoid, Central Anatolian Massif(Springer Heidelberg, 2024) Ayzit, Tolga; Singh, Mrityunjay; Chandrasekharam, Dornadula; Baba, AlperT & uuml;rkiye relies on coal-fired power plants for approximately 18 GW of annual electricity generation, with significantly higher CO2 emissions compared to geothermal power plants. On the other hand, geothermal energy resources, such as Enhanced Geothermal Systems (EGS) and hydrothermal systems, offer low CO2 emissions and baseload power, making them attractive clean energy sources. Radiogenic granitoid, with high heat generation capacity, is a potential and cleaner energy source using EGS. The Anatolian plateau hosts numerous tectonic zones with plutonic rocks containing high concentrations of radioactive elements, such as the Central Anatolian Massif. This study evaluates the power generation capacity of the Hamit granitoid (HG) and presents a thermo-hydraulic-mechanical (THM) model for a closed-loop geothermal well for harnessing heat from this granitoid. A sensitivity analysis based on fluid injection rates and wellbore length emphasizes the importance of fluid resident time for effective heat extraction. Closed-loop systems pose fewer geomechanical risks than fractured systems and can be developed through site selection, system design, and monitoring. Geothermal wellbore casing material must withstand high temperatures, corrosive environments, and should have low thermal conductivity. The HG exhibits the highest heat generation capacity among Anatolian granitoid intrusions and offers potential for sustainable energy development through EGS, thereby reducing CO2 emissions.Article Citation - WoS: 6Citation - Scopus: 8The Potential, Utilization and Development of Geothermal Energy in Türkiye(Maden Tetkik ve Arama Genel Mudurlugu-mta, 2023) Sener, Mehmet Furkan; Uzelli, Taygun; Akkus, Ibrahim; Mertoglu, Orhan; Baba, AlperGeothermal energy is a natural resource that can be utilized directly or by converting to other types of energy. Considering the diversity of the geological structure of Turkiye, the geothermal systems have developed depending on young tectonic and volcanic active rock. Western and Central Anatolia are especially rich in geothermal resources. The geothermal well with the hottest well-bottom temperature was drilled in Central Anatolia, and the well-bottom temperature was measured as 341 degrees C at a depth of 3845 meters. In 2022, Turkiye's electricity generation capacity and the total installed direct heat use reached 1663 MWe and 5113 MWt, respectively. Considering Anatolia's Curie depth and heat flux, the probable thickness of the batholith can be regarded as 10 km. For example, the total granitoid area of Western Anatolia is 4221 km2 and at least 2% of this granitoid can provide approximately 8x107 MWh of electricity by Enhanced Deep Geothermal Systems (EDGS). When all granites in Turkiye are considered, it is expected that the future capacity of Turkiye will be much higher with drilling research and development studies and the discovery of new fields. This capacity will exceed 100.000 MWt levels in the medium term, especially with the addition of EDGSs.