WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection

Permanent URI for this collectionhttps://hdl.handle.net/11147/7150

Browse

Filters

20243

Settings

Author: search.filters.author.Diker, HalideDepartment: search.filters.department.Izmir Institute of Technology

Search Results

Now showing 1 - 3 of 3
  • Article
    Citation - WoS: 3
    Citation - Scopus: 3
    Copper and Nickel Complexes Based on 4-((4 Diazenyl)-3 Synthesis, Characterization, X-Ray Studies, Dft Calculations, Molecular Docking and Antimicrobial Activity
    (Elsevier, 2024) Amin, Mina A.; Diker, Halide; Sahin, Onur; Varlikli, Canan; Soliman, Ahmed A.
    Two new copper(II) and nickel(II) complexes were prepared using 4-((4-nitrophenyl)diazenyl)-3-(trifluoromethyl)-1H-pyrazol-5-ol (ndtp) and well-characterized spectroscopically and thermally and via X-ray studies. X-ray studies confirmed the formation of two octahedral complexes, containing two ndtp and two coordinated DMF molecules. The two complexes were evaluated in vitro against Escherichia coli, Pseudomonas aeruginosa, , Staphylococcus aureus and Bacillus cereus. . [Ni(ndtp)2(DMF)2] 2 (DMF) 2 ] showed an enhanced antibacterial activity against the different bacterial strains compared to the free ligand and that of the [Cu(ndtp)2(DMF)2]. 2 (DMF) 2 ]. The mean inhibition zones exhibited by [Ni(ndtp)2(DMF)2] 2 (DMF) 2 ] were 14.7+0.6, +0.6, 14.0+1.0, +1.0, and 16.3+0.6 +0.6 mm against Escherichia coli, , Staphylococcus aureus and Bacillus cereus, , respectively. Molecular docking studies of the two complexes were performed with DNA gyrase of Escherichia coli (PDB ID: 6F86) to evaluate the potential antibacterial activities, and it was proved that the complexes were efficient for the receptor.
  • Article
    Improving the Device Stability by Controlling the Morphology of Quantum Dot Emissive Layer Via a Coating Process in Blue Qleds
    (Wiley-v C H verlag Gmbh, 2024) Diker, Halide; Ozguler, Sahika; Unluturk, Secil Sevim; Ozcelik, Serdar; Varlikli, Canan
    Blue light-emitting CdSe@ZnS/ZnS quantum dot (QD) nanoparticles (NPs) were synthesized and their photophysical properties in both solution and film phases were investigated. The morphological properties of films prepared by different coating methods i. e. single layer coating from low to high concentrations of QD solutions and layer-by-layer (multilayer) coating within constant low QD solution concentration, were also examined in detail. Varying the concentration (1-10 mg/mL) and the number of layers (from 1-16) did not essentially affect the photophysical properties of QD films, although it resulted in a direct increment in QD film thickness. The concentration and layer-dependent films were used as an emissive layer (EML) in QD light-emitting diodes (QLEDs). Although the "6 mg/ml(-1) Layer" QD EML-based device exhibited relatively high device efficiency compared to the "1 mg/ml(-10) Layers" based one at working voltage region, it had similar to 2-fold higher efficiency roll-off at high voltage region. The performance differences for both devices with the same QD EML thickness were attributed to the morphological variations for the QD layer in terms of surface roughness, void density, aggregates/clusters, and trap sites that were directly related to the charge injection balance and Auger recombination.
  • Article
    Citation - WoS: 1
    Improving the Stability of Ink-Jet Printed Red Qleds by Optimizing the Device Fabrication Process
    (Eurasia Acad Publ Group (eapg), 2024) Diker, Halide; Unluturk, Secil Sevim; Ozcelik, Serdar; Varlikli, Canan
    Red-light emitting Cadmium Sulfide 0.8 Selenide 0.2 /Zinc Sulfide (CdS (0.8) Se (0.2) /ZnS) based quantum dots (QDs) were synthesized by hot injection method and utilized as the emissive layer in the quantum dot light emitting diode (QLED) with the device structure of Indium Tin Oxide/Poly(3,4-ethylenedioxythiophene): Polystyrene Sulfonate / Polyvinylcarbazole(or Poly(N,N '-bis-4-butylphenyl-N,N '-bisphenyl)benzidin) /QD/ZincOxide/LithiumFluoride/ Aluminum [ ITO/ PEDOT: PSS/ PVK(or p-TPD )/QD/ZnO/LiF/Al]. QD inks were formulated and prepared octane: decane; (1/1, v/v) solvent system and mixed with the nonionic surfactant, TritonX-100, to make the QD inks inkjet printable. In addition to the inkjet printing technique, spin coating was also employed to form the QD emissive layer for comparing device performance. Compared to the p-TPD-based QLED device, the PVK-based device fabricated via spin coating exhibited similar to 6 -fold higher performance in terms of luminance and efficiency values. In the case of using the ink -jet printer, similar to 2 -fold higher maximum luminance value and slightly lower external quantum efficiency at the lower current density region were obtained in the p-TPD-based device. Furthermore, compared to the PVK layer, the p-TPD layer provided higher device stability regardless of the coating method the higher current density regions. We suggest that the coating method applied and the choice of hole transport layer (HTL) materials may control the device parameters.