WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
3 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Enhanced Properties of Tio<sub>2</Sub> Nanotubes Through Α-fe<sub>2</Sub>o<sub>3< Surface Decoration: Synthesis, Characterization, and Performance Evaluation(Elsevier Sci Ltd, 2024) Doluel, Eyyup Can; Kartal, Ugur; Uzunbayir, Begum; Erol, Mustafa; Yurddaskal, Metin; Pulat, Gunnur; Guler, SaadetElectrochemical anodization, under a constant voltage of 45 V and for 15, 30, and 45 min, was performed to fabricate highly ordered TiO2 nanotubes. Depending on the processing paramters, the diameter of the TiO2 nanotubes was found to be around 95 +/- 6 nm, while the thickness of TNT layer exhibited a change with anodizing time, varying from 1 to 4 mu m. Subsequent to the anodization alpha-Fe2O3/TiO2 heterogeneous structure was created by the spin coating of iron precursor based solutions on TiO2 nanotubes. X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis were utilized to ascertain the phase structure and morphology of TiO2 nanotubes. The change of optical band gap values depending on the processing parameters was calculated using UV-Vis spectrophotometer data. The photocatalytic performances of the samples, namely the degradation rates and kinetics, were evaluated by examining the photodegradation of methylene blue (MB). The (TC15) sample, obtained by anodizing for 15 min and decorated with alpha-Fe2O3, exhibited the highest photocatalytic activity, with a degradation efficiency of 70 % at the end of 7 h of light exposure. On the other hand, the inhibition percentages of bacterial growth were examined and it was seen that the TC30 sample with the highest value was 88.89 % for E.coli bacteria and 70.57 % for S.aureus. To assess the mechanism of antimicrobial activity, ROS (Reactive Oxygen Species) Analysis were perfomed on T30 and TC30 groups and the ROS amount of TC30 was higher than T30. According to the results of the L929 mouse fibroblast cytotoxicity experiment with indirect contact according to ISO 10993-5 standards, all samples showed a successful performance in terms of cell viability. The cell viability of TC15 was higher in comparison to the control group.Article Citation - WoS: 4Citation - Scopus: 5The Effect of Geometrical Characteristics of Tio2 Nanotube Arrays on the Photocatalytic Degradation of Organic Pollutants(Springer, 2023) Kartal, Uğur; Uzunbayır, Begüm; Doluel, Eyyüp Can; Yurddaşkal, Metin; Erol, MustafaHighly ordered TiO2 nanotube arrays (TNAs) were fabricated by electrochemical anodization under varying durations and voltages. The effects of the anodizing parameters on geometrical properties were investigated. The results showed that as the anodizing time increased from 15 to 45 min, the length of the nanotubes increased, but there was no change in their diameter, hence the surface area increased while the open porosity did not change. When the effect of the anodizing voltage was examined, it was observed that both the length and diameter increased as the voltage increased from 15 to 45 V. Thus, a significant increase in open porosity and surface area was observed. The UV-Vis spectrophotometer was used to evaluate the effects of all geometrical characteristics on the photodegradation of methylene blue (MB). The results showed that the anodizing parameters were highly effective on the photocatalytic degradation of MB. With the decrease of the anodizing voltage, the photocatalytic activity increased because of the geometrical characteristics of TNAs. Accordingly, TNAs with the surface area of 25 m(2)/g and the open porosity of 35% obtained by anodizing for 45 min at 15 V showed the highest photocatalytic activity with a degradation efficiency of similar to 81% in 7 h.Article Citation - WoS: 9Citation - Scopus: 9Zno Nanostructures for Photocatalytic Degradation of Methylene Blue: Effect of Different Anodization Parameters(Springer, 2022) Öksüz, Ahmet Emrecan; Yurddaşkal, Metin; Kartal, Uğur; Dikici, Tuncay; Erol, MustafaIn this paper, the photocatalytic activity of ZnO nanostructures formed by anodization method with different parameters was investigated. The synthesis of ZnO nanostructures with different morphology by varying anodic oxidation parameters containing electrolytes, molarity, voltage, and duration was analyzed. ZnO nanostructures were prepared through different parameters consisting of six samples. The produced ZnO nanostructures were investigated by using X-ray diffraction, scanning electron microscopy, diffuse reflectance spectroscopy, and UV-Vis spectrophotometer. It was found that the morphology of ZnO structures was formed as nanorods, needle-like, flower-like, heterogeneous, and homogeneous of mixed structures. ZnO nanostructures were identified by matching X-Ray diffraction peaks due to the international center for diffraction data database. Experiments on photocatalytic degradation of methylene blue demonstrated that the photocatalytic activity of ZnO samples. The best photocatalytic performance was observed by the sample anodized for an hour in 0.05 M of KHCO3 electrolytes with 40 V electrical potential. It was observed that the removal of methylene blue increased 3 times (photocatalytic degradation efficiency similar to 31% for methylene blue vs similar to 90% by the best sample) thanks to the obtained ZnO nanostructured photocatalysts. The results showed that an increment of the voltage has a significant effect on the photocatalytic activity of ZnO while keeping other parameters including molarity, time, and electrolyte type constant.