WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
14 results
Search Results
Article Citation - WoS: 14Citation - Scopus: 17Enhancement of Thermoelectric Efficiency of T-Hfse2 Via Nanostructuring(American Physical Society, 2021) Ünsal, Elif; Senger, Ramazan Tuğrul; Sevinçli, HaldunIn this work, ab initio calculations based on density functional theory and the Landauer formalism are carried out to investigate ballistic thermoelectric properties of T-HfSe2 nanoribbons (NRs). The zigzag-edged NRs are metallic, and they are not included in this study. The armchair NRs possess two types of edge symmetries depending on the number of atoms present in a row; odd-numbered NRs have mirror symmetry, whereas the even-numbered NRs have glide reflection symmetry. The armchair-edged NRs are dynamically stable and show semiconducting properties with varying band gap values in the infrared and visible regions. Detailed transport analyses show that the n-type Seebeck coefficient and the power factor differ because of the structural symmetry, whereas the p-type thermoelectric coefficients are not significantly influenced. It is shown that the phonon thermal conductance is reduced to a third of its two-dimensional value via nanostructuring. The p-type Seebeck coefficient and the power factor for T-phase HfSe(2 )are enhanced in NRs. We report that the p-type ZT value of HfSe2 NRs at 300 and 800 K are enhanced by factors of 4 and 3, respectively.Article Citation - WoS: 85Citation - Scopus: 91Ballistic Thermoelectric Properties of Monolayer Semiconducting Transition Metal Dichalcogenides and Oxides(American Physical Society, 2019) Özbal, Gözde; Senger, Ramazan Tuğrul; Sevik, Cem; Sevinçli, HaldunCombining first-principles calculations with Landauer-Mittiker formalism, ballistic thermoelectric transport properties of semiconducting two-dimensional transition metal dichalcogenides (TMDs) and oxides (TMOs) (namely MX2 with M = Cr, Mo, W, Ti, Zr, Hf; X = O, S, Se, Te) are investigated in their 2H and 1T phases. Having computed structural, as well as ballistic electronic and phononic transport properties for all structures, we report the thermoelectric properties of the semiconducting ones. We find that 2H phases of four of the studied structures have very promising thermoelectric properties, unlike their 1T phases. The maximum room temperature p-type thermoelectric figure of merit (ZT) of 1.57 is obtained for 2H-HfSe2, which can be as high as 3.30 at T = 800 K. Additionally, 2H-ZrSe2, 2H-ZrTe2, and 2H-HfS2 have considerable ZT values (both nand p-type), that are above 1 at room temperature. The 1T phases of Zr and Hf-based oxides possess relatively high power factors, however their high lattice thermal conductance values limit their ZT values to below 1 at room temperature.Article Citation - WoS: 30Citation - Scopus: 29Stacking-Dependent Excitonic Properties of Bilayer Blue Phosphorene(American Physical Society, 2019) İyikanat, Fadıl; Torun, Engin; Senger, Ramazan Tuğrul; Şahin, HasanAb initio calculations in the framework of many-body perturbation theory (MBPT) are performed to calculate the electronic and optical properties of monolayer and bilayer blue phosphorene with different stacking configurations. It is found that the stacking configuration of bilayer blue phosphorene strongly affects the electronic band gap of the material. By solving the Bethe-Salpeter equation (BSE) on top of the G(0)W(0) calculation, the binding energies, spectral positions, and band decomposition of excitons of monolayer and bilayer configurations are investigated. The most prominent two excitonic peaks of bilayers are examined in detail. Our calculations show that different stacking configurations lead to distinct interlayer interaction characteristics which lead to substantial change in the optical spectrum of bilayer blue phosphorene. Mostly intralayer and mixed interlayer excitons with quite high binding energies are obtained in bilayer blue phosphorene. Our results show that excitonic properties of ultrathin materials play an important role in tuning and improving the optoelectronic performance of two-dimensional materials.Article Citation - WoS: 1Citation - Scopus: 1Directed Growth of Hydrogen Lines on Graphene: High-Throughput Simulations Powered by Evolutionary Algorithm(American Physical Society, 2018) Özbal, Gözde; Falkenberg, J. T.; Brandbyge, M.; Senger, Ramazan Tuğrul; Sevinçli, HaldunWe set up an evolutionary algorithm combined with density functional tight-binding calculations to investigate hydrogen adsorption on flat graphene and graphene monolayers curved over substrate steps. During the evolution, candidates for the new generations are created by adsorption of an additional hydrogen atom to the stable configurations of the previous generation, where a mutation mechanism is also incorporated. Afterwards a two-stage selection procedure is employed. Selected candidates act as the parents of the next generation. The evolutionary algorithm predicts formation of lines of hydrogen atoms on flat graphene. In curved graphene, the evolution follows a similar path except for a new mechanism, which aligns hydrogen atoms on the line of minimum curvature. The mechanism is due to the increased chemical reactivity of graphene along the minimum radius of curvature line (MRCL) and to sp(3) bond angles being commensurate with the kinked geometry of hydrogenated graphene at the substrate edge. As a result, the reaction barrier is reduced considerably along the MRCL and hydrogenation continues like a mechanical chain reaction. This growth mechanism enables lines of hydrogen atoms along the MRCL, which has the potential to overcome substrate or rippling effects and could make it possible to define edges or nanoribbons without actually cutting the material.Article Citation - WoS: 54Citation - Scopus: 54Strain Mapping in Single-Layer Two-Dimensional Crystals Via Raman Activity(American Physical Society, 2018) Yağmurcukardeş, Mehmet; Bacaksız, Cihan; Ünsal, Emre; Akbalı, Barış; Senger, Ramazan Tuğrul; Şahin, HasanBy performing density functional theory-based ab initio calculations, Raman-active phonon modes of single-layer two-dimensional (2D) materials and the effect of in-plane biaxial strain on the peak frequencies and corresponding activities of the Raman-active modes are calculated. Our findings confirm the Raman spectrum of the unstrained 2D crystals and provide expected variations in the Raman-active modes of the crystals under in-plane biaxial strain. The results are summarized as follows: (i) frequencies of the phonon modes soften (harden) under applied tensile (compressive) strains; (ii) the response of the Raman activities to applied strain for the in-plane and out-of-plane vibrational modes have opposite trends, thus, the built-in strains in the materials can be monitored by tracking the relative activities of those modes; (iii) in particular, the A peak in single-layer Si and Ge disappears under a critical tensile strain; (iv) especially in mono- and diatomic single layers, the shift of the peak frequencies is a stronger indication of the strain rather than the change in Raman activities; (v) Raman-active modes of single-layer ReX2 (X=S, Se) are almost irresponsive to the applied strain. Strain-induced modifications in the Raman spectrum of 2D materials in terms of the peak positions and the relative Raman activities of the modes could be a convenient tool for characterization.Article Citation - WoS: 7Citation - Scopus: 8Hydrogenation-driven phase transition in single-layer TiSe2(IOP Publishing Ltd., 2017) İyikanat, Fadıl; Kandemir, Ali; Özaydın, H. Duygu; Senger, Ramazan Tuğrul; Şahin, HasanFirst-principles calculations based on density-functional theory are used to investigate the effects of hydrogenation on the structural, vibrational, thermal and electronic properties of the charge density wave (CDW) phase of single-layer TiSe2. It is found that hydrogenation of single-layer TiSe2 is possible through adsorption of a H atom on each Se site. Our total energy and phonon calculations reveal that a structural phase transition occurs from the CDW phase to the T d phase upon full hydrogenation. Fully hydrogenated TiSe2 presents a direct gap semiconducting behavior with a band gap of 119 meV. Full hydrogenation also leads to a significant decrease in the heat capacity of single-layer TiSe2.Article Citation - WoS: 7Citation - Scopus: 7Stable Ultra-Thin Cdte Crystal: a Robust Direct Gap Semiconductor(IOP Publishing Ltd., 2017) İyikanat, Fadıl; Akbalı, Barış; Kang, J.; Senger, Ramazan Tuğrul; Selamet, Yusuf; Şahin, HasanEmploying density functional theory based calculations, we investigate structural, vibrational and strain-dependent electronic properties of an ultra-thin CdTe crystal structure that can be derived from its bulk counterpart. It is found that this ultra-thin crystal has an 8-atom primitive unit cell with considerable surface reconstructions. Dynamic stability of the structure is predicted based on its calculated vibrational spectrum. Electronic band structure calculations reveal that both electrons and holes in single layer CdTe possess anisotropic in-plane masses and mobilities. Moreover, we show that the ultra-thin CdTe has some interesting electromechanical features, such as strain-dependent anisotropic variation of the band gap value, and its rapid increase under perpendicular compression. The direct band gap semiconducting nature of the ultra-thin CdTe crystal remains unchanged under all types of applied strain. With a robust and moderate direct band gap, single-layer CdTe is a promising material for nanoscale strain dependent device applications.Article Citation - WoS: 23Citation - Scopus: 25H-Aln Van Der Waals Bilayer Heterostructure: Tuning the Excitonic Characteristics(American Physical Society, 2017) Bacaksız, Cihan; Dominguez, A.; Rubio, A.; Senger, Ramazan Tuğrul; Şahin, HasanMotivated by recent studies that reported the successful synthesis of monolayer Mg(OH)2 [Suslu, Sci. Rep. 6, 20525 (2016)2045-232210.1038/srep20525] and hexagonal (h-)AlN [Tsipas, Appl. Phys. Lett. 103, 251605 (2013)APPLAB0003-695110.1063/1.4851239], we investigate structural, electronic, and optical properties of vertically stacked h-AlN and Mg(OH)2, through ab initio density-functional theory (DFT), many-body quasiparticle calculations within the GW approximation and the Bethe-Salpeter equation (BSE). It is obtained that the bilayer heterostructure prefers the AB′ stacking having direct band gap at the Γ with Type-II band alignment in which the valance band maximum and conduction band minimum originate from different layer. Regarding the optical properties, the imaginary part of the dielectric function of the individual layers and heterobilayer are investigated. The heterobilayer possesses excitonic peaks, which appear only after the construction of the heterobilayer. The lowest three exciton peaks are analyzed in detail by means of band decomposed charge density and the oscillator strength. Furthermore, the wave function calculation shows that the first peak of the heterobilayer originates from spatially indirect exciton where the electron and hole localized at h-AlN and Mg(OH)2, respectively, which is important for the light harvesting applications.Article Citation - WoS: 2Citation - Scopus: 2Structural Changes in a Schiff Base Molecular Assembly Initiated by Scanning Tunneling Microscopy Tip(IOP Publishing Ltd., 2016) Tomak, Aysel; Bacaksız, Cihan; Mendirek, Gizem; Şahin, Hasan; Hür, Deniz; Görgün, Kamuran; Senger, Ramazan Tuğrul; Birer, Özgür; Peeters, François M.; Zareie, Hadi M.We report the controlled self-organization and switching of newly designed Schiff base (E)-4-((4-(phenylethynyl) benzylidene) amino) benzenethiol (EPBB) molecules on a Au (111) surface at room temperature. Scanning tunneling microscopy and spectroscopy (STM/STS) were used to image and analyze the conformational changes of the EPBB molecules. The conformational change of the molecules was induced by using the STM tip while increasing the tunneling current. The switching of a domain or island of molecules was shown to be induced by the STM tip during scanning. Unambiguous fingerprints of the switching mechanism were observed via STM/STS measurements. Surface-enhanced Raman scattering was employed, to control and identify quantitatively the switching mechanism of molecules in a monolayer. Density functional theory calculations were also performed in order to understand the microscopic details of the switching mechanism. These calculations revealed that the molecular switching behavior stemmed from the strong interaction of the EPBB molecules with the STM tip. Our approach to controlling intermolecular mechanics provides a path towards the bottom-up assembly of more sophisticated molecular machines.Article Citation - WoS: 45Citation - Scopus: 45Mg(OH)2-WS2 van der Waals heterobilayer: Electric field tunable band-gap crossover(American Physical Society, 2016) Yağmurcukardeş, Mehmet; Torun, Engin; Senger, Ramazan Tuğrul; Peeters, François M.; Şahin, HasanMagnesium hydroxide [Mg(OH)2] has a layered brucitelike structure in its bulk form and was recently isolated as a new member of two-dimensional monolayer materials. We investigated the electronic and optical properties of monolayer crystals of Mg(OH)2 and WS2 and their possible heterobilayer structure by means of first-principles calculations. It was found that both monolayers of Mg(OH)2 and WS2 are direct-gap semiconductors and these two monolayers form a typical van der Waals heterostructure with a weak interlayer interaction and a type-II band alignment with a staggered gap that spatially separates electrons and holes. We also showed that an out-of-plane electric field induces a transition from a staggered to a straddling-type heterojunction. Moreover, by solving the Bethe-Salpeter equation on top of single-shot G0W0 calculations, we show that the low-energy spectrum of the heterobilayer is dominated by the intralyer excitons of the WS2 monolayer. Because of the staggered interfacial gap and the field-tunable energy-band structure, the Mg(OH)2-WS2 heterobilayer can become an important candidate for various optoelectronic device applications in nanoscale.