WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
185 results
Search Results
Conference Object Citation - WoS: 24Effect of pH and Hydration on the Normal and Lateral Interaction Forces Between Alumina Surfaces(2006) Polat, Mehmet; Sato, Kimiyasu; Nagaoka, Takaaki; Watari, KojiNormal and lateral interaction forces between alumina surfaces were measured using Atomic Force Microscopy-Colloid Probe Method at different pH. The normal force curves exhibit a well-defined repulsive barrier and an attractive minimum at acidic pH and the DLVO theory shows excellent agreement with the data. The normal forces are always repulsive at basic pH and the theory fails to represent the measurements. Lateral forces are almost an order of magnitude smaller in the basic solutions. These differences, which have important implications in the study of stability and rheology, are attributed to the hydration of the alumina surface at basic pH. © 2013 Elsevier B.V., All rights reserved.Conference Object Problem of Cracked Infinite Hollow Cylinder With Two Rigid Inclusions(Civil Comp Press, 2000) Artem, HSA; Gecit, MRThis paper is concerned with the fracture of an axisymmetric hollow cylindrical bar containing rigid inclusions. The cylinder is under the action of uniformly distributed axial tension applied at infinity. The hollow cylinder contains a ring-shaped crack at the symmetry plane whose surfaces are free of tractions and two ring-shaped rigid inclusions with negligible thickness symmetrically located on both sides of the crack. Geometry and the loading is symmetric about z-axis. Along the rigid inclusions displacements are constant and continuous whereas stresses have jumps. The inner and the outer surfaces of the cylinder are free of tractions It is assumed that the material of the cylinder is linearly elastic and isotropic. The mixed boundary conditions of the problem lead the analysis to a system of three singular integral equations for crack surface displacement derivative and normal and shear stress jumps on rigid inclusions. These integral equations are solved numerically and the stress intensity factors at the edges of the crack and at the edges of the inclusions are calculated. Results are presented in graphical form.Conference Object Nanoscale Surface Modification of Ultrahigh Molecular Weight Polyethylene (UHMWPE) Samples With the W Plus C Ion Implantation(Materials Research Soc, 2007) Urkac, E. Sokullu; Oztarhan, A.; Tihminlioglu, F.; Kaya, N.; Budak, S.; Chhay, B.; Ila, D.In this work, Ultra High Molecular Weight Poly Ethylene (UHMWPE) samples Were implanted by W + C ions using Metal-Vapour Vacuum Arc (MEVVA) ion implantation system with a fluence of 10(17) ion/cm(2) and extraction voltage of 30 kV. Samples were characterized with Raman Spectra, ATR-FTIR, UV-VIS-NlR Spectrum and RBS. Surface morphology of implanted and unimplanted samples were examined in nanoscale with AFM.Conference Object Citation - Scopus: 5Adaptive Visual Servo Regulation Control for Camera-In Configuration With a Fixed Camera Extension(Institute of Electrical and Electronics Engineers Inc., 2007) Tatlıcıoğlu, Enver; Dawson, Darren M.; Xian, B.In this paper, image-based regulation control of a robot manipulator with an uncalibrated vision system is discussed. To compensate for the unknown camera calibration parameters, a novel prediction error formulation is presented. To achieve the control objectives, a Lyapunov-based adaptive control strategy is employed. The control development for the camera-in-hand problem is presented in detail and a fixed-camera problem is included as an extension.Article Citation - WoS: 2The Development of Western-Type Large-Scale Consumption Areas in Turkey and Legal and Structural Regulation Efforts in Urban Retail Environments(Yıldız Teknik Üniversitesi, 2009) Kompil, Mert; Celik, MuratThe retail sector has been experiencing a rapid and continuous change worldwide. There have also been profound changes in Turkey, especially after the 1980s. Both the retail sector and the urban retail environments have been altered radically. One of the most significant indicators of this change is the proliferation of western-type large-scale retail developments. Past experiences in developed countries have shown that the uncontrolled development of large-scale retail areas results in some undesired socioeconomic and physical outcomes, such as decline in the cultural and commercial activities of city centers, damage in existing retail workforce structure, and change in local retail hierarchy, nearby land uses, traffic loads and original architectural identity. Many countries have put into practice restrictive and regulatory policies to prevent these negative effects. As similar transformations have also been realized in Turkish retail environments, many institutions think that similar legal regulations must be implemented in Turkey as well. The present study investigates the ongoing retail change within the Turkish context, explores the legal and structural regulatory policies of the Organization for Economic Co-operation and Development (OECD) countries, and critically discusses the appropriate retail regulation policies for Turkey.Article Citation - WoS: 1Citation - Scopus: 1Çelik Köprü I-kirişlerine Yanal Destek Sağlayan Trapez Sac Kalıpların Mukavemeti(Turkish Chamber of Civil Engineers, 2009) Eğilmez, Oğuz Özgür; Alkan, DenizTrapez Sac Kalıplar (TSK) hem çelik bina hem de çelik köprü sektörlerinde beton döşemenin kalıp sistemi olarak sıklıkla kullanılmaktadırlar. TSK’ler her ne kadar bina inşaatlarında çelik I-kirişlere yanal destek sağlayıcı elemanlar olarak işlev görseler de, çelik köprü sektöründe trapez sac kalıplardan destek elemanları olarak yararlanılmasına izin verilmez. Ancak, önceki çalışmalar birleşim detayının geliştirilmesi durumunda TSK sisteminin kirişin yanal kararlılığına belirgin şekilde destek sağlayabildiğini göstermiştir. Bu makale halen devam etmekte olan ve TSK’lerin mukavemetinin incelendiği analitik bir çalışmanın ara sonuçlarını içermektedir. Geçmişte, TSK sistemleriyle desteklenen köprü kirişlerin genel burkulma davranışını irdeleyen basit sonlu elemanlar modelleri (SEM) kullanılmıştır. Bu çalışmada TSK’leri hem birbirlerine hem de kirişlere bağlayan vidalardaki kararlılık destek kuvvetlerini belilemek için kullanılan geliştirilmiş bir sonlu elemanlar modelinin sonuçlarına yer verilmiştir. Bu çözümleme sonuçları TSK’lerin içermesi gereken mukavemet ihtiyacını belirleyecek olan bir tasarım yönteminin geliştirilmesinde kullanılacaktır.Article Efficient Design of Nursing Unit Floors(Yıldız Teknik Üniversitesi, 2009) Kazanasmaz, Z. Tugce; Duzgunes, ArdaHospital designs aim to obtain the lowest possible construction, maintenance and operational costs together with patient satisfaction, comfort and privacy. To satisfy these needs, the efficient design of nursing unit areas becomes considerably important. This study was thus conducted to analyze planimetric design efficiency of nursing unit floors by defining certain floor areas and floor area ratios. To test existing nursing unit floors, quantitative assessments were noted in regard to their planimetric efficiency: the utility value of the built floor area, both in terms of its allocation to patient space (served), support (serving) and circulation space and the relative proportions of these. Results were presented in a comparative table. Of the 15 hospital floor plans analyzed, five satisfied minimum space requirements for patient areas, while another five were in the optimum range for circulation areas. Two were defined as the least efficient, having the lowest patient-to-circulation area ratio.Conference Object Native and Light Induced Defect States in Wide Band Gap Hydrogenated Amorphous Silicon-Carbon (a-Si1 : H) Alloy Thin Films(Springer, 1997) Güneş, MehmetIn this study, wide band gap a-Si1-x C-x:H alloy thin films prepared with and without hydrogen diluation of (SiH4, CH4) were characterized using optical absorption, dark conductivity, steady-state photoconductivity, sub-bandgap absorption obtained with both photothermal deflection spectroscopy (PDS) and dual beam photoconductivity (DBP), and electron spin resonance (ESR) techniques. Experimental results of steady-state photoconductivity and sub-bandgap absorption for different generation rates were analyzed using a detailed numerical model based on Simmons-Taylor statistics. The densities, energy location and nature of the native and light induced defect states in diluted and undiluted a-Si1-xCx:H alloy thin films were derived from the best fits to the experimental data. The extracted parameters for defect states were compared with those of a-Si:H films both in the annealed and light degraded states.Conference Object Effect of Some Physical, and Chemical Variables on Flocculation and Sediment Behaviour(A.A. Balkema Publishers, 2000) Polat, Hürriyet; Polat, Mehmet; İpekoğlu, ÜnerEffect of some chemical and physical variables on the settling rate, final sediment height, sediment viscosity and supernatant turbidity of a clay sample was studied using various polyacrylamide type flocculants. Increasing flocculant concentration significantly increased both the settling rate and sediment viscosity. More importantly, changes in the final sediment, height, hence the packing density, was minimal for all the conditions tested once the sediment was allowed to consolidate. Also, the mode of addition of the polymer, at once or continuous, did not seem to affect any of the parameters measured. Conditioning time seemed to alter the settling rate at low polymer concentrations, but had no effect at high polymer concentrations. However, increasing the conditioning time caused a decrease in the sediment viscosity. Different types of the polyacrylimides generated different settling rates at a given concentration, but the final sediment height was nearly independent of polymer type.Conference Object Predicting Drying in Solvent-Coated Polymeric Films(American Chemical Society, 2000) Alsoy Altınkaya, Sacide; Duda, John Larry[No abstract available]