WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
15 results
Search Results
Article Citation - WoS: 17Citation - Scopus: 18Development of an Ionic Liquid Based Method for the Preparation of Albumin Nanoparticles(John Wiley and Sons Inc., 2018) Demirkurt, Begüm; Akdoğan, Yaşar; Akdoğan, Yaşar; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyAlbumin based nanocarriers have been widely used in drug delivery studies. Here, we developed a water-in-ionic liquid (IL) emulsion-like method to prepare bovine serum albumin (BSA) nanoparticles as alternative to the traditional organic solvents containing techniques. Conformational changes of albumin induced by the imidazolium based ILs at the water-IL interface triggers the BSA nanoparticle formation. The albumin nanoparticle formation are dependent on the experimental parameters and the hydophobicity of the IL. At pH 9.0, using 1.3%wt of BSA in water/1-butyl-3-methyl imidazolium tetrafluoroborate (BmimBF4) (50/50 mol%) and TX-100/butanol surfactant mixture yields uniformly distributed 200 nm average sized BSA nanoparticles. Different than BmimBF4, using a more hydrophilic IL, EmimBF4 yielded albumin aggregates. Instead, using a more hydrophobic IL, HmimBF4 produced albumin nanoparticles but a non-uniform size distribution was obtained. These results indicate that the ionic liquids called green and designer solvents can be also used to synthesize albumin nanoparticles.Article Citation - WoS: 84Citation - Scopus: 85A Review on Halide Perovskites as Color Conversion Layers in White Light Emitting Diode Applications(John Wiley and Sons Inc., 2018) Güner, Tuğrul; Demir, Mustafa Muammer; Demir, Mustafa Muammer; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyIn the last decade, halide perovskites have attracted great interest due to many reasons, including their low cost, solution-processability, superior PL properties, broad range of color tunability, color purity, and defect tolerance, among others. They are in increasing demand for a wide range of applications, such as solar cells, light emitting diodes (LEDs), white LEDs (WLED), and lasers. Yellow phosphors have been heavily employed in solid-state lighting, since its illumination by blue yields white light with various optical features, such as high/low CRI, CCT, and luminous efficiency. However, phosphors as pigments are seldom found and are costly material. In this sense, halide perovskites may offer a promising alternative to phosphors for future solid-state lighting. In this study, the synthesis and optical properties of halide perovskites, as well as their application in WLED as a conversion layer are investigated.Article Citation - WoS: 37Citation - Scopus: 39Polymer-Derived Ceramic Adsorbent for Pollutant Removal From Water(John Wiley and Sons Inc., 2018) Zeydanlı, Damla; Ahmetoğlu, Çekdar Vakıf; Ahmetoğlu, Çekdar Vakıf; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyPolymer-derived ceramic components (SiOC, sample W) were produced from preceramic polymer mixture and a catalyst. After curing and pyrolysis, some of the samples etched by hydrofluoric acid to obtain carbonaceous SiOC (C-rich SiOC, sample W-HF). W and W-HF were tested as an adsorbent material to remove both heavy-metal ions (Cr (III), Pb (III), and Cd (II)) and cationic dyes (Methylene Blue (MB), Rhodamine B (RB), and Crystal Violet (CV)) from aqueous solutions. HF-treated high surface area SiOC samples had quite high adsorption affinity for cationic dyes. According the Langmuir isotherm model the maximum dye uptake values were found to be around to 50 mg/g for sample W, whereas those for sample W-HF ranged from 104 to 186 mg/g. Regeneration studies were conducted both by heat treatment and leaching, high recovery yields (always above 97%) of MB adsorption were obtained.Article Citation - WoS: 56Citation - Scopus: 55A Bodipy-Based Fluorescent Probe To Visually Detect Phosgene: Toward the Development of a Handheld Phosgene Detector(John Wiley and Sons Inc., 2018) Sayar, Melike; Karakuş, Erman; Emrullahoğlu, Mustafa; Yıldız, Büşra; Yıldız, Ümit Hakan; Yıldız, Ümit Hakan; 04.01. Department of Chemistry; 04.04. Department of Photonics; 04. Faculty of Science; 01. Izmir Institute of TechnologyA boron-dipyrromethene (BODIPY)-based fluorescent probe with a phosgene-specific reactive motif shows remarkable selectivity toward phosgene, in the presence of which the nonfluorescent dye rapidly transforms into a new structure and induces a fluorescent response clearly observable to the naked eye under ultraviolet light. Given that dynamic, a prototypical handheld phosgene detector with a promising sensing capability that expedites the detection of gaseous phosgene without sophisticated instrumentation was developed. The proposed method using the handheld detector involves a rapid response period suitable for issuing early warnings during emergency situations.Article Citation - WoS: 21Citation - Scopus: 22First-Principle Phonon Transport Properties of Nanoscale Graphene Grain Boundaries(John Wiley and Sons Inc., 2018) Sandonas, Leonardo Medrano; Sevinçli, Haldun; Gutierrez, Rafael; Cuniberti, Gianaurelio; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThe integrity of phonon transport properties of large graphene (linear and curved) grain boundaries (GBs) is investigated under the influence of structural and dynamical disorder. To do this, density functional tight-binding (DFTB) method is combined with atomistic Green's function technique. The results show that curved GBs have lower thermal conductance than linear GBs. Its magnitude depends on the length of the curvature and out-of-plane structural distortions at the boundary, having stronger influence the latter one. Moreover, it is found that by increasing the defects at the boundary, the transport properties can strongly be reduced in comparison to the effect produced by heating up the boundary region. This is due to the large reduction of the phonon transmission for in-plane and out-of-plane vibrational modes after increasing the structural disorder in the GBs.Article Citation - WoS: 24Citation - Scopus: 29Hydrophobic Coatings From Photochemically Prepared Hydrophilic Polymethacrylates Via Electrospraying(John Wiley and Sons Inc., 2017) Işık, Tuğba; Demir, Mustafa Muammer; Isık, Tuğba; Demir, Mustafa Muammer; Yağcı, Yusuf; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyLinear poly(hydroxyethyl methacrylate-co-methyl methacrylate) P(HEMA-co-MMA) and poly(dimehylaminoethyl methacrylate-co-methyl methacrylate) P(DMAEMA-co-MMA) and their corresponding hyperbranched copolymers were synthesized by conventional photoinitiated free radical polymerization and self-condensing vinyl polymerization (SCVP) using Type I and Type II photoinitiators, respectively. Then, the polymers were processed by electrospraying in N, N-dimethylformamide. The surface of the resulting electrospray coatings was examined by SEM, XPS, and WCA then compared with those prepared by drop casting. Regardless of the structural nature of the polymers, electrospraying allows the preparation of rough surface that shows more hydrophobic behavior. Electrospray coatings with linear and hyperbranched copolymers exhibited WCA as ∼150° and ∼130°, respectively, indicating that branching reduces the WCA.Article Citation - WoS: 6Citation - Scopus: 7Utilization of Electrospun Polystyrene Membranes as a Preliminary Step for Rapid Diagnosis(John Wiley and Sons Inc., 2016) Işık, Tuğba; Horzum, Nesrin; Yıldız, Ümit Hakan; Liedberg, Bo; Isık, Tuğba; Demir, Mustafa Muammer; 04.01. Department of Chemistry; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyRecent advances in clinical practice drive deoxyribonucleic acid (DNA) as an important class of biomarker. Monitoring the change in their concentration suggests the initiation and/or progression of various disorders. However, low quantity of DNA biomarkers in body fluids requires a delicate isolation methodology that provides efficient separation and easy handling. This study describes a newer-generation separation technology relying on electrospun fibers of sub-micrometer diameter of a commodity polymer for DNA biomarkers in simulative serum. Fibrous polystyrene membranes are prepared by electrospinning and they are subjected to post-modification with Au. The composite membranes may provide a convenient environment for the removal of bovine serum albumin (BSA) from BSA and DNA mixtures. The eluent can be used as an efficient tool for detection of DNA biomarkers associated with diagnosis of numerous life-threatening diseases.Article Citation - WoS: 58Citation - Scopus: 86Intrinsic Surface-Drying Properties of Bioadhesive Proteins(John Wiley and Sons Inc., 2014) Akdoğan, Yaşar; Akdoğan, Yaşar; Huang, Kuo-Ying; Kageyama, Yoshiyuki; Danner, Eric W.; Miller, Dusty R.; Martinez Rodriguez, Nadine R.; Waite, J. Herbert; Han, Songi; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologySessile marine mussels must "dry" underwater surfaces before adhering to them. Synthetic adhesives have yet to overcome this fundamental challenge. Previous studies of bioinspired adhesion have largely been performed under applied compressive forces, but such studies are poor predictors of the ability of an adhesive to spontaneously penetrate surface hydration layers. In a force-free approach to measuring molecular-level interaction through surface-water diffusivity, different mussel foot proteins were found to have different abilities to evict hydration layers from surfaces - a necessary step for adsorption and adhesion. It was anticipated that DOPA would mediate dehydration owing to its efficacy in bioinspired wet adhesion. Instead, hydrophobic side chains were found to be a critical component for protein-surface intimacy. This direct measurement of interfacial water dynamics during force-free adsorptive interactions at solid surfaces offers guidance for the engineering of wet adhesives and coatings. Home and dry underwater: Repulsive hydration forces hinder wet adhesion in the absence of applied external forces. The direct measurement of hydration-water dynamics by NMR relaxometry at 10 GHz revealed that the most hydrophobic mussel adhesive protein, and not the most enriched with 3,4-dihydroxyphenylalanine, effectively dries the surface and overcomes repulsive hydration forces to adsorb spontaneously to surfaces in preparation for adhesion.Article Citation - WoS: 19Citation - Scopus: 19Biofilm Formation by Staphylococcus Epidermidis on Nitrogen Ion Implanted Cocrmo Alloy Material(John Wiley and Sons Inc., 2007) Öztürk, Orhan; Sudağıdan, Mert; Öztürk, Orhan; 04.05. Department of Pyhsics; 04. Faculty of Science; 01. Izmir Institute of TechnologyStaphylococcus epidermidis is the primary cause of medical device-related infections due to its adhesion and biofilm forming abilities on biomaterial surfaces. For this reason development of new materials and surfaces to prevent bacterial adhesion is inevitable. In this study, the adhesion of biofilm forming S. epidermidis strain YT-169a on nitrogen (N) ion implanted as well as on as-polished CoCrMo alloy materials were investigated. A medical grade CoCrMo alloy was ion implanted with 60 keV N ions to a high dose of 1.9 × 10 18 ions/cm2 at substrate temperatures of 200 and 400°C. The near-surface implanted layer crystal structures, implanted layer thicknesses, and roughnesses were characterized by XRD, SEM and AFM. The number of adherent bacteria on the surfaces of N implanted specimens was found to be 191 × 106 CFU/cm2 for the 200°C and 70 × 106 CFU/cm2 for the 400°C specimens compared to the as-polished specimen (3 × 106 CFU/cm2). The adhesion test results showed that S. epidermidis strain YT-169a adhere much more efficiently to the N implanted surfaces than to the as-polished CoCrMo alloy surface. This was attributed mainly to the rougher surfaces associated with the N implanted specimens in comparison with the relatively smooth surface of the as-polished specimen.Article Citation - WoS: 42Citation - Scopus: 43Investigation of Oxygen Permeation Through Composites of Pmma and Surface-Modified Zno Nanoparticles(John Wiley and Sons Inc., 2009) Hess, Sandra; Demir, Mustafa Muammer; Yakutkin, Vladimir; Baluschev, Stanislav; Wegner, Gerhard; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyOxygen permeabilities of nanocomposite films consisting of poly(methyl methacrylate) (PMMA) and different amounts of spherical zinc oxide (ZnO) nanoparticles were determined to investigate the barrier effect of this material with respect to particle content. A method was applied which is based on quenching of an excited phosphorescent dye by oxygen. Possible effects of the nanoparticles on the response of the dye molecules were investigated and were ruled out.