WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
64 results
Search Results
Article Citation - WoS: 15Citation - Scopus: 15Granulation of Hydrometallurgically Synthesized Spinel Lithium Manganese Oxide Using Cross-Linked Chitosan for Lithium Adsorption From Water(Elsevier B.V., 2024) Recepoğlu,Y.K.; Arabacı,B.; Kahvecioğlu,A.; Yüksel,A.A drastic increase in demand for electric vehicles and energy storage systems increases lithium (Li) need as a critical metal for the 21st century. Lithium manganese oxides stand out among inorganic adsorbents because of their high capacity, chemical stability, selectivity, and affordability for lithium recovery from aqueous media. This study investigates using hydrometallurgically synthesized lithium manganese oxide (Li1.6Mn1.6O4) in granular form coated with cross-linked chitosan for lithium recovery from water. Characterization methods such as SEM, FTIR, XRD, and BET reveal the successful synthesis of the composite adsorbent. Granular cross-linked chitosan-coated and delithiated lithium manganese oxide (CTS/HMO) adsorbent demonstrated optimal removal efficiency of 86 % at pH 12 with 4 g/L of adsorbent dosage. The Langmuir isotherm at 25 °C, which showed monolayer adsorption with a maximum capacity of 4.94 mg/g, a better fit for the adsorption behavior of CTS/HMO. Adsorption was endothermic and thermodynamically spontaneous. Lithium adsorption followed the pseudo-first-order kinetic model. © 2024Article Citation - WoS: 11Citation - Scopus: 11Renewable-Based Treatment Solution of Reactive Blue 21 Dye on Fly Ash as Low-Cost and Sustainable Adsorbent(Elsevier, 2024) Kobya, Mehmet; Dolaz, Mustafa; Goren, Aysegul YagmurThis study investigated the removal of Reactive Blue 21 (RB 21) dye from aqueous solutions by adsorption, evaluating the waste fly ash (FA). The effects of the parameters, such as initial dye concentration (100-750 mg/ L), initial pH (2.0-8.0), adsorbent dose (1.0-4.0 g/L), and temperature (298-323 K) on the adsorption process were investigated. The optimum initial pH value was 2.0 for the highest RB21 dye removal (75.2 mg/g). At optimized conditions (pH 2.0, an adsorbent dosage of 1.0 g/L, a dye concentration of 750 mg/L, and an equilibrium time of 72 h), the highest adsorption capacity was found to be 105.2 mg/g. Moreover, the results of the kinetic studies fitted the pseudo-second-order kinetic model. Equilibrium data were best represented by the Langmuir isotherm model, with a maximum monolayer adsorption capacity of 103.41 mg/g at 323 K. Delta G0ads values were negative and varied from 11.64 to 9.50 kJ/mol in the temperature range of 298-323 K, the values of enthalpy (Delta Ho ads) and entropy (Delta So ads) of thermodynamics parameters were calculated as 37.62 kJ/mol and 86.67 J/mol K, respectively, indicating that this process was endothermic. Furthermore, the adsorbent costs for powdered activated carbon (PAC) and FA to remove 1 kg of RB 21 dye from aqueous solutions are calculated as 2.52 U.S. $ and 0.34 U.S. $, respectively. It is seen that the cost of FA is approximately 7.4 times lower than PAC. The results showed that FA, a low-cost industrial waste, was promising for the adsorption of RB 21 from aqueous solutions.Article Citation - WoS: 6Citation - Scopus: 6Synthesis of a Novel Cellulose-Based Adsorbent From Olive Tree Pruning Waste for Removal of Boron From Aqueous Solution(Springer Science and Business Media Deutschland GmbH, 2024) Altınbaş, B.F.; Yüksel, A.This work investigated the valorization of olive tree pruning debris as a biosorbent for the removal of environmentally hazardous boron from aqueous solution using batch adsorption. For this purpose, a novel, waste-based, boron selective biosorbent from olive tree pruning waste (N-OPW) was synthesized. Alkali pretreatment, followed by glycidyl-methacrylate (GMA) grafting and providing boron selectivity with n-methyl-d-glucamine (NMDG) steps, was applied to the biomass, respectively. N-OPW was characterized using SEM, TGA, and FT-IR analyses. N-OPW showed excellent boron biosorption capacity (21.80 mg/g) in an operation pH range between 2 and 12. The equilibrium was attained in 2 h and the Freundlich isotherm (R2 = 0.997) and pseudo-second-order kinetics (R2 = 0.99) provided the strongest match to experimental data. According to thermodynamic studies, boron adsorption was exothermic (ΔH = −34.14 kJ/mol). The reusability tests with real geothermal water showed that adsorbent had no significant decrease in boron removal capacity while desorbing >99% of the boron adsorbed for three cycles of adsorption/desorption. Results indicated that a promising, reusable, and boron selective biosorbent was successfully synthesized while utilizing olive pruning waste. Graphical abstract: (Figure presented.) © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2023.Article Citation - WoS: 31Citation - Scopus: 34Insights Into Engineered Graphitic Carbon Nitride Quantum Dots for Hazardous Contaminants Degradation in Wastewater(Elsevier, 2023) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaIncreased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C3N4) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C3N4 QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C3N4 QD-based materials. Furthermore, this review discusses the practical applications of g-C3N4 QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C3N4 QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C3N4 QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.Article Citation - WoS: 49Citation - Scopus: 54Highly Porous Poly(o-Phenylenediamine) Loaded Magnetic Carboxymethyl Cellulose Hybrid Beads for Removal of Two Model Textile Dyes(Springer, 2022) Arıca, Tuğçe Aybüke; Balcı, Fadime Mert; Balcı, Sinan; Arıca, Mehmet YakupEnsuring the removal of complex dyes from wastewater is a topic of great interest as it is vital for the environment. The present study reports a facile preparation method for poly(o-phenylenediamine) [p(o-PDA)] micro-particles loaded to magnetic carboxymethyl cellulose (CMC) hydrogel beads as adsorbents. The prepared products were characterized by FTIR, TGA, VSM, SEM, BET, and zeta sizer. The Fe3O4@p(o-PDA)@CMC beads were used for the removal of Reactive Blue 4 (RB-4) and Congo Red (CR) textile dyes from an aqueous medium. Different factors, such as adsorbent dose, initial pH, ionic strength, contact time, temperatures, and initial RB-4 and CR concentrations were examined. The maximum adsorption capacities of the RB-4 dye and CR at optimum pH 5 reached 398.7 and 524.6 mg/g in 120 min, respectively. The adsorption of RB-4 and CR on the hybrid magnetic beads can be due to the electrostatic, hydrogen bonding, and π-π interactions. Moreover, the magnetic hybrid beads showed easy regeneration ability and good reusability. The adsorbent can be a very good candidate for the efficient removal of micro-pollutant from wastewater.Article Citation - WoS: 10Citation - Scopus: 12Novel Hybrid Adsorption-Electrodialysis (aded) System for Removal of Boron From Geothermal Brine(American Chemical Society, 2022) Altınbaş, Bekir Fırat; Orak, Ceren; Ökten, Hatice Eser; Yüksel, AslıA novel hybrid adsorption-electrodialysis (AdED) system to remove environmentally harmful boron from geothermal brine was designed and effective operating parameters such as pH, voltage, and flow rate were studied. A cellulose-based adsorbent was synthesized from glycidyl methacrylate (GMA) grafted cellulose and modified with a boron selective n-methyl-d-glucamine (NMDG) group and characterized with SEM-EDX, FT-IR, and TGA analyses. Batch adsorption studies revealed that cellulose-based adsorbent showed a remarkable boron removal capacity (19.29 mg/g), a wide stable operating pH range (2-10), and an adsorption process that followed the Freundlich isotherm (R2= 0.95) and pseudo-second-order kinetics (R2= 0.99). In the hybrid AdED system, the optimum operating parameters for boron removal were found to be a pH of 10, a voltage of 10 V, a flow rate of 100 mL/min, and an adsorbent dosage of 4 g/L. The presence of the adsorbent in the hybrid system increased boron removal from real geothermal brine (containing 199 ppm boron) from 7.2% to 73.3%. The results indicate that the designed AdED system performs better than bare electrodialysis for boron removal from ion-rich real geothermal brine while utilizing environmentally friendly cellulose-based adsorbent.Article Citation - WoS: 18Citation - Scopus: 22Effect of Fomes Fomentarius Cultivation Conditions on Its Adsorption Performance for Anionic and Cationic Dyes(American Chemical Society, 2022) Henning, Laura M.; Simon, Ulla; Abdullayev, Amanmyrat; Schmidt, Bertram; Pohl, Carsten; Nunez Guitar, Tamara; Ahmetoğlu, Çekdar Vakıf; Meyer, Vera; Bekheet, Maged F.; Gurlo, AleksanderLab-cultivated mycelia of Fomes fomentarius (FF), grown on a solid lignocellulose medium (FF-SM) and a liquid glucose medium (FF-LM), and naturally grown fruiting bodies (FF-FB) were studied as biosorbents for the removal of organic dyes methylene blue and Congo red (CR). Both the chemical and microstructural differences were revealed using X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, zeta potential analysis, and scanning electron microscopy, illuminating the superiority of FF-LM and FF-SM over FF-FB in dye adsorption. The adsorption process of CR on FF-LM and FF-SM is best described by the Redlich-Peterson model with β constants close to 1, that is, approaching the monolayer Langmuir model, which reach maximum adsorption capacities of 48.8 and 13.4 mg g-1, respectively, in neutral solutions. Adsorption kinetics follow the pseudo-second-order model where chemisorption is the rate-controlling step. While the desorption efficiencies were low, adsorption performances were preserved and even enhanced under simulated dye effluent conditions. The results suggest that F. fomentarius can be considered an attractive biosorbent in industrial wastewater treatment and that its cultivation conditions can be specifically tailored to tune its cell wall composition and adsorption performance.Article Citation - WoS: 42Citation - Scopus: 44Boron Carbon Nitride Nanosheets in Water and Wastewater Treatment: a Critical Review(Elsevier, 2022) Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaThe availability and accessibility of clean and secure water supplies are pressing technological and scientific issues worldwide. As a result of global water constraints, wastewater treatment and reuse are being evaluated as feasible alternatives to fresh water for agricultural irrigation and domestic and industrial purposes. Boron carbon nitride (BCN) nanosheets have been studied intensively in the last decade in batteries, biosensors, and capacitors, and for use as catalysts, and they have recently been used in wastewater treatment. BCN materials, along with their synthesis processes, characteristics, and application areas in water and wastewater treatment, are discussed thoroughly in this paper. Additionally, synthesis processes for ternary BCN compounds, including chemical vapor deposition, ion beam-aided deposition, magnetron sputtering, and pulsed laser deposition, are described. BCN materials have also been explored because of their flexible electrical features, excellent mechanical strength, outstanding unreactivity, and significant stability, which make them appropriate for a range of severe environment applications. Thus, the use of BCN materials as photocatalysts and adsorbents and in electrochemical reduction and capacitive deionization are also discussed thoroughly. The highest ammonia production of 172,226.5 μg/h.mg.cat and faradic efficiency of 95.3% have been obtained using the BCN@Cu/CNT catalyst, whereas the ammonia production and FE values for metal-free BCN are 7.75 μg/h.mg.cat and 13.8%. Moreover, the maximum attained adsorption capacities of BCN nanosheets for Pb2+ and Hg2+ are 210 and 625 mg/g, respectively. Overall, this review indicates that essential work on BCN nanosheets is still needed. Future research should focus on the development of BCN nanostructures to encourage multidisciplinary research.Article Adsorpsiyon ile Virüslerin Giderilmesine İlişkin Bir İnceleme(Gazi Üniversitesi, 2021) Eren, Muhammet Şakir Abdullah; Tanaydın, Elif Sıla; Arslanoğlu, Hasan; Çiftçi, Harun2020 yılında Çin’in Hubei eyaletinin Vuhan şehrinden neredeyse tüm ülkelere yayılan Covid-19 (SARS-CoV-2 Enfeksiyonu)’un potansiyel tehlikeleri, dünya çapında bilim insanlarının ilgi odağı olmuştur. Covid-19’un pnömoniden ağır akut solunum yolu enfeksiyonlarına ve böbrek yetmezliğinden ölüme kadar uzanan ciddi etki süreçleri milyonlarca insan için tehdidini sürdürmektedir. Ortaya çıkan yeni viral enfeksiyonlarda uygun tedavi protokollerinin geliştirilmesi için pandemik türlerin izolasyonu büyük önem arz etmektedir. Bunun için yeni yöntemlerin yanında mevcut yöntemlerin de geliştirilmesi gereklidir. Virüsler doğada canlı formda bulunmazlar ve genetik materyalini aktarabilmek için başka canlılara ihtiyaç duyarlar. Ayrıca izole edilmiş yüzeylerde hızla inaktif hale getirilebilirler. Bu yönüyle su kaynakları ve hava en önemli iletim vasıtaları olarak karşımıza çıkmaktadır. Virüslerin yayılmasının önüne geçmede ve onları etkisiz hale getirmede iletim vasıtalarına yönelik adsorpsiyon işlemleri uygulanabilmektedir. Bu derlemede, virüslerin karbonlu, oksitli, gözenekli materyaller ve metal organik kafes yapıları içeren çeşitli adsorbanlarla etkileşimleri incelendi. Su ve hava arıtmasında kullanılan adsorbanların hedef türleri adsorplama işlemlerinde elektrostatik etkileşimlerin daha etkili olduğu belirlendi. Virüs yüzeyinin çeşitli organik fonksiyonel grupları taşıması nedeniyle farklı adsorbanlar ile elektrostatik etkileşime geçeceği ve bu şekilde de onların uzaklaştırılarak hem izole edilmesi hem de etkisiz hale getirilmesi mümkün görülmektedir. Çalışmamızın Koronavirüsler dahil diğer patojenlerin hava ve su kaynaklarına uygulanacak adsorpsiyon işlemleri ile yayılmalarının engellenmesine ve belirtilen iletim vasıtalarının dezenfekte edilmesine yönelik etkili çözümlere katkı sağlayacağını düşünmekteyiz.Article Citation - WoS: 15Citation - Scopus: 17Fabrication, Characterization, and Adsorption Applications of Low-Cost Hybride Activated Carbons From Peanut Shell-Vinasse Mixtures by One-Step Pyrolysis(Springer, 2021) Arslanoğlu, Esra; Eren, Muhammet Şakir Abdullah; Arslanoğlu, Hasan; Çiftçi, HarunThe present work aims to develop an innovative, alternative, fast, and cost-effective one-step pyrolysis method for activated carbon production using peanut shell and vinasse mixture. This facile procedure is based on single-step carbonization treatment at a temperature range of 400-800 degrees C. Different carbonization time (15-360 min), impregnation ratio (1-3 g/g), impregnation time (3-24 h), and nitrogen flow rate (300 and 600 ml/min) were examined. The chemical and physical properties of the activated carbon examined by SEM-EDX, FT-IR analysis, particle size distribution, iodine number, pH(zpc), BET surface area, and surface functional group analysis by Boehm's titration. The results illustrate that the values of BET surface area, total pore volume, average pore diameter, iodine number, pH(zpc), and carbon content of activated carbon were found as 1290.5 m(2)/g, 0.5667 cm(3)/g, 21.2 angstrom, 1258.4 mg/g, 5.7, and 86.89%, respectively.